|
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground Concrete, brick work, masonry, etc. complete all as specified and directed. |
| 2 | Dismantling fencing wire mesh any type complete all as specified and directed. |
| 3 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and directed. |
| 4 | M&L PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 20 mm graded stone aggregate complete all as specified and directed. |
| 5 | S&F MS framed work such as fencing post including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 6 | Supply only MS flat iron as in fillets for securing wire mesh including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe-410 W(Gde-E-250) quality-A complete all as specified and directed. |
| 7 | M&L PVC coated GI chain link fencing 3.5mm dia with 50mm x 50mm mesh including fixing of MS line wire / rod, flat iron & machine made hexagonal or square head bolts to fencing posts complete all as specified.(supply only of MS rod and bolts will be measured and paid seperately) complete all as specified and directed. |
| 8 | Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 9 | Supply only mild steel screw bolts n exc 12 mm dia machine made with hexagonal or square head at one end and screwed the other or screwed both ends for fixing of chain link fencing complete all as specified and directed. |
| 10 | Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 12 | Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed. |
| 13 | S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.(Note : Height of the bldg up to G+3 storey including necessary safety arrangements) etc., complete all as specified and as directed. |
| 14 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.Note : Height of the bldg up to G+3 storey including necessary safety arrangements) etc., |
| 15 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe.290.Gde-E-165 etc., complete all as specified and as directed. |
| 16 | M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe 410 -W (Gde- E- 250) quality- A etc., complete all as specified and as directed. |
| 17 | S&F Aluminium flat iron work in wind ties 40x6mm size fixed with 50mm/ 75 mm aluminium self staging screws with integral EPDM washer screwed in roof covering all as directed.Note :- Height of the bldg up to 15 mtrs including necessary safety arrangements etc., |
| 18 | Demolition of Precast Concrete work/ precast concreteblock built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 19 | Demolition of stone slabs and tiles of any description or thicness in floors laid bedded pointed in any cement mortor in any position not otherwise specifically provided for complete all as specified and directed. |
| 20 | Demolition of cement concrete(reinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed. |
| 21 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation ,shafts wells etc n exc 10 sqm on plan and getting out in hard/ dense Soil complete all as specified and directed. |
| 22 | M&L for High Strength deformed TMT bars 10 mm dia and over, cut to length, bent to shape reqiured including carncking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 23 | M&L for High Strength deformed TMT bars 5 mm dia and over upto and including 10 mm dia stirrups, spacers and binders, cut to length, bent to shape reqiured including carncking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 24 | Use and waste of formwork for foundations, footing, bases of cloumns and plinth beam etc. for flat rough finished surfaces of concrete complete all as specified and directed. |
| 25 | Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat rough finished surfaces of concrete complete all as specified and directed. |
| 26 | M&L for RCC Type B1 1:2:4 using 20mm graded aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 27 | M&L for RCC Type B1 1:2:4 using 20mm graded aggregate Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 28 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) etc., complete all as specified and directed. |
| 29 | M&L Rendering 15mm thick in cement mortar 1:4 on EXERNAL WALL fair faces or brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | M&L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 31 | Rounding to edges of stone slabs one edge, such as steop, cooking platform and other similar situations complete all as specified and directed. |
| 32 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 33 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 34 | Mild steel, plain, black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 35 | Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 36 | M&L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. etc., complete all as specified and as directed. Note :- considered for Railing on balcony /staircase portion at any postition. |
| 37 | M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 38 | M & L for 100 mm thick, PCC 1:4:8, Type D-2 (ditto), using 40mm graded aggregate as in Sub base complete all as specified and as directed. |
| 39 | Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed. |
| 40 | M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring/levelling coarse, sunken floor etc complete all as specified and as directed. |
| 41 | Material and labour for 75mm thick PCC (1:3:6) type C2 using 40mm graded aggregate as in plinth protection including finishing even and smooth with using extra cement, complete all as specified and as directed. |
| 42 | M&Lfor virtified ceramic tiles 10mm thick (square/ rectangular) polished heavy duty vertified tiles 400x400 size in floors, steps, raisers, etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 43 | M&L for preparation of old plastered surface and applying one coat of 100% premium acrylic emlusion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & Fungal resistance , dirt resistance exterior paint of WHITE Colour with Silicon additives coat applied @1.67 litre./10Sqm over complete all as specified adn as directed . Note Asian Paints (Apex Ultima) , Berger (Weather coat long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height |
| 44 | M&L for preparation of old plastered surface and applying one coat of 100% premium acrylic emlusion paint(company depot tinted) having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & Fungal resistance , dirt resistance exterior paint of with Silicon additives coat applied @1.67 litre./10Sqm over complete all as specified adn as directed . Note Asian Paints (Apex Ultima) , Berger (Weather coat long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height Please Enable Macros to View BoQ information |
