|
| 1 | CHARPOY GI PIPE (FD 220, FD 220 (R)) |
| 2 | Removing of broken long rails of GI pipe charpoy and supply and fixing new long rail of GI tubing 32m dia medium grade duly threaded complete all as specified and directed. Make : Prakash, Surya, Jindal |
| 3 | Conversion of long rails into short rail, duly threaded and fixing to charpoy after removing broken short rails complete all as specified and directed by Engineer-in-Charge. |
| 4 | Conversion of short rails into legs, duly threaded and fixing to charpoy after removing broken short rails, complete all as specified and directed BY Engineer-in-Charge. |
| 5 | Replacement of damaged and unserviceable GI elbows with new 3 way 32mm medium grade , ISI marked complete all as specified and directed. |
| 6 | Replacement of damaged and unservicable check nuts with new check nuts 32 x 10mm and fixing on long rail complete all as specified and directed. |
| 7 | Removing plywood top from charpoy GI and replacing with new plywood commerical type12mm thick, 6 ply, fixed with counter sunk nut and bolts with steel washers and replacing damaged nut and bolts and MS flat stiffnener as required of 40 mm x 6 mm , complete all as specified and directed. |
| 8 | Conversion of charpoy GI nylon newar into charpoy GI with plywood top with 12mm commercial plywood 6 ply, 02 No of Stiffener of MS plate 900mmx 40mm x 5mm thick shall be provided and welded long rail to long rail of charpoy GI pipe duly painted with black sy-enameled paint after a coat of red oxide, plywood shall be fixed with counter sunk nut & bolt of 60mm x 6mm with washers and fixed to plywood top complete all as specified and directed. |
| 9 | Bed hard tubler steel with plytop / Bed Hard MAP |
| 10 | Replacement of unserviceable head board made out of PPB 18mm thick one side teak face laminated and one side white laminated rest all as per drawing complete all as specified and directed by Engineer-in-Charge. |
| 11 | Replacement of unserviceable foot board made out of PPB 18mm thick one side teak face laminated and one side white laminated rest all as per drawing complete all as specified and directed by Engineer-in-Charge. |
| 12 | Replacement old dmaged / wornout hard top made out of plywood top 12 mm thick Commercial 6 ply, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Charpoy IP tubler steel with hard top |
| 14 | Replacement of Commercial plywood top 12 mm thick 6 ply complete all as specified and directed by Engineer-in-Charge. |
| 15 | CHAIR TUBULAR STEEL WITH ARMS (FD-75(M)) |
| 16 | S&F in Replacement of unserviceable seat of hard-wood duly canned with 2mm wide half round plastic cane in godrej pattern and black polished complete all as specified and directed by Engineer-in-Charge. |
| 17 | S&F in Replacement of unserviceable back of hard-wood duly canned with 2mm wide half round plastic cane in godrej pattern and black polished complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F in Replacement of unserviceable arms of hardwood duly black polished complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F of MS plate 25x490x3mm including welding to front and rear steel frame duly painted with Olive Green paint over a coat of primer of make Asian Apcolite/Berger/Nerolac complete all as specified and directed by Engineer-in-Charge. |
| 20 | Painting of complete chair frame with Olive Green synthetic enameled paint over a coat of primer of make Asian Apcolite/Berger/Nerolac complete all as specified and directed by Engineer-in-Charge. |
| 21 | Hard rubber/PVC shoes to be provided to the chair CB steel with arms complete all as specified and directed by Engineer-in-Charge. |
| 22 | Hard rubber Caps to be provided to the chair CB steel with arms complete all as specified and directed by Engineer-in-Charge. |
| 23 | CHAIR VERANDHA (FD-256) |
| 24 | Preparation of surfaces of chair verandah, removing of rust/dust with emery paper and painting with synthetic enamelled white paint of make Asian Apcolite/Berger/Nerolac complete all as specified and directed by Engineer-in-Charge. |
| 25 | Welding to joints of Chair verandah, complete all as specified and directed by Engineer-in-Charge. |
| 26 | Re-canning of chair verandah with 4 mm wide half round plastic cane white colour premium brand, canning shall be done complete all as specified and directed by the Engineer-in-Charge. |
| 27 | Hard rubber/PVC shoes shall be provided to the chair verandah complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F PVC seats and backs to the Chair varandha after removing old damaged worn out PVC seats and back. |
| 29 | CHAIR CONFERENCE WITH CUSHIONED SEAT & BACK (Special) |
| 30 | S&F in Replacement of cloth leatherite / Tapestry of colour and pattern as approved , material for upholstering like foam cushion, 28 density and other required materials shall be of best quality, PVC shoes for legs of the chairs ,complete all as specified and directed by the Engineer-in-charge. |
| 31 | CHAIR CUSHIONED SEAT & BACK (Special) / (TP) |
| 32 | S&F in Replacement of leatherite cloth of colour and pattern as approved , material for upholstering like foam cushion, 28 density and other required materials shall be of best quality, PVC shoes for legs of the chairs, complete all as specified and directed by the Engineer-in-charge. |
| 33 | Chair school / chair examination / chair /TP FD/E6 MAP |
| 34 | S&F new seats PVC (blowplast/supreme/amco or equivlant) after removing old damaged seats fixing shall be done with approprate size screws and washers. Colour and pattern as approved by the engr in charge. |
| 35 | S&F new hand rest on the chair examination / chair school / chair with hand rest made out of 18 mm thick plank of Teakwood well seasoned and attached with pyno hingis shape and size as mentioned in drg. |
| 36 | Painting to the steel structure of the chair in two coats of best quality paint with best worksmanship. |
| 37 | Repair to Chair Revolving Executive / Chair revolving long back |
| 38 | Supply and fixing with welding work & removing and fixing of unserviceable part as per pattern of Durun / complete assy complete all as specified and directed by Engineer-in-Charge. |
| 39 | Removing of unserviceable fabric, foam cushions of seat and back and upholistring of existing chair computer with new fabric, new foam 50mm thick high density (32 density) for seat and back rest as per best trade practice Note : Min price range for cloth is Rs 200/- per mtr |
| 40 | Taking out Unserviceable base for chair and S&F new base complete in all respects as pe requirement and duly functional, all as specified and directed. |
| 41 | Removing of Unserviceable hand rest and S & F new hand rest of best quality as approved and required to make functional the chair |
| 42 | Replacement in Repair of padestal assembly as per sample available in BS Yard |
| 43 | S&F the PVC caster wheels pin type to the base of the chair revolving to make the chair and base proper functional. |
| 44 | S&F the PVC caster wheels Screw type to the base of the chair revolving to make the chair and base proper functional. |
| 45 | ALMIRAH LARGE STEEL FD-67(M), FD-103, FD114(M), FD-104(M) FD-350Removing unserviceable part of Almirah large steel, Almirah 1/2 H 1/2 S, etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer -in-Charge. |
| 46 | Leg made out 1.00 mm thick MS Sheet |
| 47 | Shelves made out of 1.00 thick MS Sheet a clip |
| 48 | Complete Locking device with adjustable rods and locking machanisim and lock |
| 49 | Door made out of 1.00 mm thick MS Sheet |
| 50 | BOOK CASE STEEL FD-1029, 1022 (TP) |
| 51 | S&F the glases of the shutters after removing the old damaged broken glasses. The gl;asses shall be gixed with proper gaskits and packings with full worksmanship. |
| 52 | S&F new locks to the shutters of the book case after remiving the old damaged locks. |
| 53 | S&F new shutters made out of MS sheet 1.00 mm thcikness fabrcated to fix peoperly in the existing book case structure after removing old damaged shutters |
| 54 | ALMIRAH MED STEEL FD-67(M), FD-103, FD114(M), FD-104(M)Removing unserviceable part of Almirah medium steel, Etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer -in-charge. |
| 55 | Leg made out 1.00 mm thick MS Sheet |
| 56 | Shelves made out of 1.00 thick MS Sheet |
| 57 | Complete 3 Way Locking device with adjustable rods and locking machanisim and lock |
| 58 | Door made out of 1.00 mm thick MS Sheet |
| 59 | LOCKER BED SIDE STEEL FD-1029Removing unserviceable part of locker bed side steel etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer-in-charge. |
| 60 | Leg mae out 1.00 mm thick MS Sheet |
| 61 | Hasp & Staple MS CP |
| 62 | Door made out of 1.00 mm thick MS Sheet |
| 63 | MS CP Handle FOR ALMIRAH ALL TYPE: ( FD-67(M), 83(M), FD-1032,FD-114(M),FD-104(M), FD-350(M)) |
| 64 | S&F in repairs Chromium plated handle for Almirah any type. Fixing shall be done properly with washirs and bolts with worksmanship. |
| 65 | LOCK FOR ALMIRAH ALL TYPE: (FD-67(M), 83(M), FD-1032,FD-114(M),FD-104(M), FD-350(M)) |
| 66 | S&F in repairs steel lock with duplicate key (4 Liver). Make Godrej/Harison for almirah any type . Fixing shall be done properly with scres and key hole covers outside to the lock on the door leaf with worksmanship. |
| 67 | TABLE OFFICE CLK STEEL FD-84(M), FD-1004 :- Removing unserviceable part of Table office clerk steel, table typist steel and supply and fixing the following new parts as per specified drawing and as directed by Engineer - in- charge |
| 68 | Complete Drawer box with acessories as per Drg made out of 1.00 mm thick MS Sheet |
| 69 | Locke 4 liver of drawer with duplicate Key |
| 70 | TABLE OFFICE OFFICERS STEEL FD-84(M), FD-1003Removing unserviceable part of table officer steel and supply and fixing the following new parts as per specified drawing and as directed by Engineer-in-charge. |
| 71 | complete Drawer box with acessories as per Drg made out of 1.00 mm thick MS Sheet |
| 72 | Lock 4 liver of drawer with duplicate Key |
| 73 | TABLE 3X2 WITH DRAWER (Steel) FD 1008 etc |
| 74 | complete Drawer box for table 3x2 with acessories as per Drg made out of 1.00 mm thick MS Sheet |
| 75 | Locke 4 liver of drawer with duplicate Key |
| 76 | MS TUBE 25mm for repairs FD-84(M), FD-1004 /1003, FD-165, FD-1007/1008, FD-1018 |
| 77 | S&F in repairs MS Tube 25 mm Square, 16 Gauge welded to existing frame duly painted paint OG / Black/ silver/ white as required and as directed to match with the existing surfaces all as directed. |
| 78 | Repair to chair computer / Chair Revolving /Chair Padded/ and all kind of TP revolving chairs |
| 79 | Supply and fixing with welding work & removing and fixing of unserviceable part as per pattern of Durun / complete assy complete all as specified and directed by Engineer-in-Charge. |
| 80 | Removing of unserviceable fabric, foam cushions of seat and back and upholistring of existing chair computer / chair revolving or chair revolving (TP) any pattern with new fabric, new foam 50mm thick high density (32 density) for seat and back rest as per best trade practice Note : Min price range for cloth is Rs 200/- per mtr |
| 81 | Taking out Unserviceable base for chair revolving (any given pattern) and S&F new base complete in all respects with caster wheels as pe requirement and duly functional, all as specified and directed. |
| 82 | Removing of Unserviceable hand rest and S & F new hand rest of best quality as approved and required to make functional the chair |
| 83 | Replacement in Repair of padestal assembly as per required shape and size to make functional the chair |
| 84 | Replacement of heavy duty gas lift Hydraulic pneumatic shock cylinder 120mm to make functional the chiar |
| 85 | S&F the PVC caster wheels pin type to the base of the chair revolving to make the chair and base proper functional. |
| 86 | S&F the PVC caster wheels Screw type to the base of the chair revolving to make the chair and base proper functional. |
| 87 | Replacement of cushion cover of seat and back made out of tapastery cloth / cloth letheritic as approved to make functional the cushion of the chair. |
| 88 | Welding works to the steel furniture |
| 89 | Gas welding on the conduit and soft sheet surfaces with proper worksmanship, the welding shall be done in running hand welding joints. |
| 90 | Electric / Rod welding on the sheet surfaces with proper worksmanship, the welding shall be done in running hand welding joints. |
| 91 | Multipurpose Chair Cinema (TP) |
| 92 | Removing old damaged seats and back of the chair cinema and repairing and fixing the seats and back after replacing foam cushions of both seat and back and provideing foam cushion in shape,cloth leathertic (pattern and colour as approved) repairing the structure of the chair and making functional the forward / backward and sliding motion of the chair in smooth and noiseless. |
| 93 | SS SLIDING CHANNELS |
| 94 | S&F SS Sliding Channels to the wooden / steel furniture where ever required for Drawers, keyboars, mouse boards etc in repairs with approprate size screws to make functional the furniture articles. |
| 95 | PAINTING TO FURNITURE ARTICLES:- Painting to the steel furniture after prepration of surfaces, cleaning the durt, dust, rust with amery papers, removing dents if any, applying suitable putty and smoothing the surfaces, applying a coat of redoxide on fresh surfaces and painting the steel furniture internally and externally with existing colour scheme of OG / Black / White / Smoke grey paint manually make Asian / Nerolac / Berger of 1st quality paint. The painting will be done as directed by Engr –in charge at site (site of work includes the places where furniture items are issued and in use at different locations of Wing) |
| 96 | Almirah large steel 1/2 H 1/2 SH |
| 97 | Almirah large steel with shelves |
| 98 | Almirah medium steel with shelves and Small Steel |
| 99 | Book case steel FD - 1029 / book case library |
| 100 | Bed Hard IP Steel FD/E6/MAP/08R |
| 101 | Box Kit Steel |
| 102 | Chair Tubler Steel with Arms |
| 103 | Chapoy Folding IP Steel |
| 104 | Form without and with back FD-78,77(M) |
| 105 | Locker steel FD - 1029 |
| 106 | Ladder for loft FD-238 |
| 107 | Rack side 3/4 spaces steel FD - 1023 |
| 108 | Rack Shoes steel FD/E6/MAP/02R |
| 109 | Rack six tiers steel FD - 1038 |
| 110 | Rack record steel 6' x 2.5' x 6' |
| 111 | Rack Adjustable steel large/small |
| 112 | Stool 2' High SPL |
| 113 | Stool steel 305x305x510MM FD-409 |
| 114 | Table Computer |
| 115 | Teapoy Varandah Map FD/E6/map/17 |
| 116 | Table office clerk steel FD - 1004 |
| 117 | Table office officers steel FD - 1003 |
| 118 | Table typist steel |
| 119 | Trestle store room steel |
| 120 | Two Tier Sleeping Bunk |
| 121 | Table steel 900 x 600 x 760 mm FD - 1007 |
| 122 | Table steel 900 x 600 x 760 mm FD - 1009 |
| 123 | Deduction to be made from BOQ for Schedule 'A' Part-III (Credit Schedule from dismantling / taking down items) worth Rs 1,39,815.00 during AOC. (Note :- Tenderers shall not quote for this Schedule) Please Enable Macros to View BoQ information |
