|
| 1 | Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, with using paving bitumen VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder (paving bitumen VG-30) @ 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed by Engineer in charge. |
| 2 | Scarifying or packing graveled macadam or bituminous macadam surfaces in area n exc 400 sm each and depth exc 50 mm but n. exc 100 mm complete all as specified and directed by Engneer in charge. |
| 3 | M&L for WBM of 100mm thick (compacted thickness) with coarse stone aggregate (Granite trap or Basaltstone) of grading 1 (90 to 40mm size) spread. Rolled and consolidated to gradient and camber required with power roller 8 to 12 Ton complete all as specified and directed by Engineer in charge |
| 4 | M&L for preparing surfaces of un-surfaced WBM by brushing with wire brushed for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/ tack coat with using paving bitumen VG-10, @ 10 kg per sqm complete all as specified and directed by Engineer in Charge. |
| 5 | M&L for Premix bituminous macadam with using paving bitumen VG-30, as 4 % of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed by Engineer in charge. |
| 6 | M&L for preparing old black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10 @ 5 kg per 10 sq metre complete all as specified and directed by Engineer in charge. |
| 7 | M&L for laying Bituminous premix asphaltic dense concrete 30 mm consolidated thickness with 5.50% binder content by weight to total mix using VG 30 paving bitumen mixing in hot mix plant and transported through covered vehicle and laid by Mechanised paver rolled and compacted to required chamber and gradient complete & rolling to a smooth surface with 8 to 12 tonne power vibrator roller complete all as specified and as directed. |
| 8 | M&L for preparing bituminous surfaces of road and marking 2mm thick centre lines, stop lines, dashes, arrows etc, and the like n.exc 10cm wide on roads pavements with hot applied thermoplastic road marking paint with glass beads of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturer's instrucitons complete all as specified and as directed. |
| 9 | M&L moorum /red bajri filling in floors or paving laid in layers n exc 15cm thick spread leveled and rammed including watering complete all as specified and directed by Engineer in charge. |
| 10 | S&F in repair of CAT eye (road stud) of size 100x100x25 mm (Model : DA 51) made by polycarbonate moulded bood with electronically welded prismatic retro lange on both sides for max reflection in wet or dry condition to be fixed with bituminous adhesive as per MORTH specification complete all as specified and directed by Engineer in charge. |
| 11 | S&F in repair of metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 12 | S&F in repair of solar road stud LED based intelligent road studs of size 125x125x25mm (shank 65mm) made from aluminium alloy and construction. One high capacity NI-Cd rechargeable battery with view distance approximate 1000m, LEDs 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colour back up 12 hours of continuous lighting at night including fixing with epoxy screed bed all as per manufacturer direction or directed by Engr-in-Charge. |
| 13 | S & F in repairs for Convex mirror of 1000mm Height (Model CM-04, Dark Eye) of polycarbonate, 1.5mm lens, ABS body, Unbreakable/Shatter-resistant, UV stabilized fixed with steel post incl two coat of synthetic enamel paint over a coat of primer and including necessary excavation and PCC 1:2:4 using 12.5 mm graded aggregate (Size of post hole = 450 x 450 x 600 mm) complete all as specified and as directed by Engr-in-Charge. (Make : Sinor / Dark Eye / 3M Road Knight / Avery Dennison road Sign / Greenlite) |
| 14 | M/L for providing PCC 1:4:8 type D2 using (40mm graded stone aggregate) in foundation, filling and mass concrete, levelling course etc.complete all as specified and direted, |
| 15 | Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 16 | Demolition of cement concrete of any description and (un reinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) and demolished material removed from site complete all as specified and directedNote:Demolition material throughout MOD Land rate include above item . |
| 17 | Material and labour for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 18 | M and L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 19 | M&L for providing and laying at or near ground level factory made kerb stone of M-35 grade cement concrete in position to the required line level and curvatare jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp carve shall not more than 5mm) including making drainage opening wherever required complete all as specified and directed. |
| 20 | M&L for cement concrete ( 1:2:4) type B-1 (12.5 mm graded stone agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, parapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating but factory made (machine Pressed) complete all as specified and directed. |
| 21 | Preparation of new/ old surface of cocrete or surfaces of any description over 10 cm girth or width and applying two coat of synthetic enamel paint over coat of cement primer of colour as specified and approved by Engr-in-Charge. Please Enable Macros to View BoQ information |
