|
| 1 | Excavation in trenches n .exc 1.5 mtr wide and not exec 1.5 mtr depth and getting out in loose/soft soil complete all as specified and directed. |
| 2 | Description all as per ser item No 1.00 above, but depth exceeding 1.5m and not exceeding 3.0 m complete all as specified and directed. |
| 3 | Returing filling in incl spreading leveling, watering and well ramming in layer not less than 25 cum each layer all as specified. |
| 4 | Removing excavated material to a distance not exc 50M and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified |
| 5 | M&L filling of dry sand under and around LT cable to provide sand cushioing and in sub stn ducts/trenches complete all as directed. |
| 6 | M/L for brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed. |
| 7 | M&L PCC 1:4:8 type D 2 using 40 mm graded stone aggregate for foundation of pole & stay complete all as directed |
| 8 | M&L PCC 1:3:6 type C 2 using 40 mm graded stone aggregate for filling of pole & stay complete all as directed |
| 9 | M&L PCC 1:2:4 type B2 using 20 mm graded stone aggregate for coping of pole complete all as directed |
| 10 | Supply and fixing in replacement of old UNSV ACSR conductor of any size from poles and M & L for ACSR conductor including stringing on LT poles complete incl aluminium binding wires,jumpering,bindings at insulators etc complete all as directed by Engr in charge. |
| 11 | S & F in replacement of Cross arm, bracings, supports , clamps and back plate fabricated from structural steel section, including nut , bolts , washers, welding , bendings cold or hot, drilling hole for both in any shape or size as indicated or directed and inclusive of one prime coat, one under coat and one finishing coat of paint incl taking down the old unserviceable cross arms complete all as directed. |
| 12 | Taking out old unserviceable PCC poles 9 mtr long and supply and erection of steel tublar swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts, screws as specified type 410 SP-31 (9.0 mtr long) incl painting the exposed portion of the pole with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded portion with two coats of black bituminous paint over a coat of red oxide primer. Marking of pole number with black paint in yellow circle all as specified and directed by Engr-in-Charge. |
| 13 | Disconnecting the windings of loose overhead conductors of LT lines from insulators and restringing the same for proper sag and rewinding incl aluminium winding wires, tapes etc and jumpering for any type of conductor complete of single run conductor all as directed. Note: Triming of tree branches around the pole upto 3 mtr is deemed to be included in the rates quoted. |
| 14 | M & L for trimming of tree branches touching or leaning over overhead power lines of 2 to 5 branches over a span in between two adjusent poles will be measure as one unit and removing of cut tree branches from the site complete all as directed. Note ** Trimming of tree branches will be done by chainsaw/ saw/ axe using ladder etc. |
| 15 | Supply and fix in replacement of insulator pin type porcelain vitereous , white brown or green insulator including one galvanised mild steel spindle, two galvinised washer and one GI nut 100 mm height and 65 mm dia for 1100 Volt grade complete all as directed. |
| 16 | Supply and fix in replacement of insulator shackle type, porcelain, vitereous, white brown or green insulator including one galvanised mild steel straps, washers, insulator bolts, washer and nuts for working pressure 1100 Volts height 100mm, dia 115mm, section of strap (31x5) mm dia of bolt 14 mm complete all as directed by Engr in charge. |
| 17 | Taking out old UNSV and Supply, laying, jointing and testing of XLPE insulated, armoured, heavy duty LT under ground cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area for following sizes, including taking down old, complete, all as specified and directed :- Make: Havells/ Polycab/KEI |
| 18 | Description all as per ser item No 17.00 above, but XLPE insulated 10 Sqmm 2 Core. |
| 19 | Description all as per ser item No 17.00 above, but XLPE insulated 16 Sqmm 2 Core. |
| 20 | Description all as per ser item No 17.00 above, but XLPE insulated 16 Sqmm 4 Core. |
| 21 | Description all as per ser item No 17.00 above, butXLPE insulated 25 Sqmm 3.5 Core. |
| 22 | Description all as per ser item No 17.00 above, but XLPE insulated 35 Sqmm 3.5 Core. |
| 23 | Description all as per ser item No 17.00 above, butXLPE insulated 50 Sqmm 3.5 Core. |
| 24 | Description all as per ser item No 17.00 above, but XLPE insulated 70 Sqmm 3.5 Core. |
| 25 | Description all as per ser item No 17.00 above, but XLPE insulated 95 Sqmm 3.5 Core. |
| 26 | Description all as per ser item No 17.00 above, but XLPE insulated 120 Sqmm 3.5 Core. |
| 27 | Description all as per ser item No 17.00 above, but XLPE insulated 150 Sqmm 3.5 Core. |
| 28 | Supply and fixing of moulded case circuit breaker Four pole 630 Amps 50 KA capacity 415V 50Hz with adjustable thermal and magnetic relay incl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 29 | Supply and fixing of moulded case circuit breaker Four pole 400 Amps 36 KA capacity 415V 50Hz with adjustable thermal and magnetic relay incl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 30 | Supply and fixing of moulded case circuit breaker Four pole 350 Amps 36 KA capacity 415V 50Hz with adjustable thermal and magnetic relay incl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 31 | Supply and fixing of moulded case circuit breaker Four pole 250 Amps 36 KA capacity 415V 50Hz with adjustable thermal and magnetic relay incl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 32 | Supply and fixing of moulded case circuit breaker Four pole 160 Amps 36 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 33 | Supply and fixing of moulded case circuit breaker Four pole 125 Amps 16 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 34 | Supply and fixing of moulded case circuit breaker Four pole 100 Amps 16 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 35 | Supply and fixing of moulded case circuit breaker Four pole 63 Amps 16 KA capacity 415V 50Hz with adjustable thermal and fixed magnetic relay incl taking out the old unserviceable complete all as specified and directed by Engr-in-Charge. |
| 36 | M & L for tube light grade galvanised with all fittings laid along the pole/in trenches / under road or floor of 40 mm bore including removing the rusted old one complete all as specified and directed. |
| 37 | M & L for tube light grade galvanised with all fittings laid along the pole/in trenches / under road or floor of 50 mm bore including removing the rusted old one complete all as specified and directed. |
| 38 | Supply and replacing of 1100 volts grade heavy duty cable PVC insulated aluminium conductor as service connections served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm dia GI suspension wire one twin core cable flat or circular stranded conductor of size 10 sqmm 2 core complete all as specified and directed. |
| 39 | Supply and replacing of 1100 volts grade heavy duty cable PVC insulated aluminium conductor as service connections served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm dia GI suspension wire one twin core cable flat or circular stranded conductor of size 16 sqmm 2 core complete all as specified and directed. |
| 40 | M/L for replacement of Earthing complete with GI earth plate 60x60cmx6mm thick electrode and 4mm dia GI wire as earthing lead.burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 15 mm dia light grade up to 7.5 mtr length of earth wire,charcoal dust and salt etc and connected to earthing test point all as specified and as directed by Engr-in-charge. |
| 41 | S & F in replacement of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 35W mounted on MCPCB suitable for 50mm dia pipe in gress protection IP-66 complete all as specified and as directed. |
| 42 | S & F in replacement of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 60W mounted on MCPCB suitable for 50mm dia pipe in gress protection IP-66 complete all as specified and as directed. |
| 43 | S & F in replacement of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 70W mounted on MCPCB suitable for 50mm dia pipe in gress protection IP-66 complete all as specified and as directed. |
| 44 | S & F in replacement of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 90W mounted on MCPCB suitable for 50mm dia pipe in gress protection IP-66 complete all as specified and as directed. |
| 45 | Taking down after disconnection of old UNSV of street/security/road/post top light fitting and supply and fixing of LED based energy saving & environment friendly long life versatile luminaire made in pressure die cast housing and heat sink with aluminium extruded with IP-65 of 35 watt complete with front toughened glass cover including connection with 2.5 sqmm 3 core PVC insulated copper wire complete all as specified. |
| 46 | Taking down after disconnection of lod UNSV of high must light fittings and supply and fixing in replacement of LED based saving & enviorment friendly long life versatile flood light Lumos IP-65 of 100 W complete with front glass cover complete as specified. |
| 47 | Taking down after disconnection of lod UNSV of high must light fittings and supply and fixing in replacement of LED based saving & enviorment friendly long life versatile flood light Lumos IP-65 of 120 W complete with front glass cover complete as specified. |
| 48 | Supply and fixing in replacement of LED driver suitable for 35 to 60W complete |
| 49 | Supply and fixing in replacement of LED driver suitable for 70W complete |
| 50 | Supply and fixing in replacement of LED driver suitable for 90W to 120 W complete |
| 51 | M & L for Cutting out the burnt out cable end and reconnecting with providing new lugs,tapes etc for cable size 25 sqmm 3.5 core to 50 sqmm 3.5 core complete all as specified and directed. |
| 52 | M & L for Cutting out the burnt out cable end and reconnecting with providing new lugs,tapes etc for cable size 70 sqmm 3.5 core to 120 sqmm 3.5 core complete all as specified and directed. |
| 53 | Material and labour for replacement of panel control wiring in LT Panels and Feeder Pillar Boxes using solid copper conductor single core PVC insulated 2.5 sqmm cable for voltmeter, ammeter, starters, indicators and selector switches etc complete all as specified and directed. |
| 54 | S & F PVC Line spacer of superior quality of 4 Way spiral type all as specified and as directed. |
| 55 | S & F PVC Line spacer of superior quality of 6 Way spiral type all as specified and as directed. |
| 56 | M & L for Painting of steel tubular pole 9.0 mtr long, by applying one coat of alluminium paint after scraping / brushing and cleaning the rust on pole and cross arms . Alluminium painting will be done on pole above 1.5 Mtr hight from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and white enammelled paint ( 30 cms each) Pole Nos will be written on pole by black paint in yellow circle of 150mm dia all as directed by Engr in charge. |
| 57 | Supply and installation of on load change over switch in sheet metal enclosure of capacity 63 Amps, complete all as specified and directed. |
| 58 | Supply and installation of on load change over switch in sheet metal enclosure of capacity 100 Amps, complete all as specified and directed. |
| 59 | Supply and installation of on load change over switch in sheet metal enclosure of capacity 200 Amps, complete all as specified and directed. |
| 60 | M&L straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 50 to 120 sqmm x 3.5 / 4 core, as per the size of existing UG cable. |
| 61 | Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
