|
| 1 | Overhauling and repair of multistage VT pump of any make/capacity by disconnecting electrical/ mechanical connection, taking out pump from existing bore well approx depth varying from 45 mtr to 80 mtr with all accessories such as column pipe, top/line shaft, bushes, spiders and bowl assembly, transporting to workshop to carry out repair work, replacement of minor unserviceable components/spares like nuts, bolts, washer & suitable size the like with new, reassemble all the parts/portions (as elaborated under \\"supply only\\" items hereafter), refix at same location, position, re-lowering in same bore well, re-connection, re-commissioning and testing to ensure efficient and smooth functioning to obtain required discharge, etc complete, all as specified and directed.Note : Defective major components/spares elaborated hereafter in respecive item of schedule shall be measured as supply only. |
| 2 | Supply only 30mm dia stainless steel top shaft in multiple length each not exceeding 3m as per sample. |
| 3 | Supply only 25mm dia stainless steel top shaft in multiple length each not exceeding 3m as per sample. |
| 4 | Supply only 30mm dia stainless steel line shaft threaded on both ends in multiple length each not exceeding 3m as per sample. |
| 5 | Supply only 25mm dia stainless steel line shaft threaded on both ends in multiple length each not exceeding 3m as per sample. |
| 6 | Supply only 30mm dia stainless steel line shaft coupling as per sample. |
| 7 | Supply only 25mm dia stainless steel line shaft coupling as per sample. |
| 8 | Supply only 30mm dia stainless steel line shaft sleeve as per sample. |
| 9 | Supply only 25mm dia stainless steel line shaft sleeve as per sample. |
| 10 | Supply only 150mm bore, 150mm long heavy duty MS socket fully threaded as per sample. |
| 11 | Supply only 100mm bore, 150mm long heavy duty MS socket fully threaded as per sample. |
| 12 | Supply only gun metal bearing retainer of size 150mmx30mm as per sample. |
| 13 | Supply only gun metal bearing retainer of size 100mmx25mm as per sample. |
| 14 | Supply only 30mm bore bearing retainer synthetic rubber bush of size 150mm as per sample. |
| 15 | Supply only 25mm bore bearing retainer synthetic rubber bush of size 100mm as per sample. |
| 16 | Supply only gun matel split type gland including 02 Nos studs suitable for 25 to 38mm bore pump shaft including provision of gland packing as per sample. |
| 17 | Supply only gun metal plated stuffing box bush suitable for 25 to 38mm bore shafts as per sample. |
| 18 | Cutting worn out portion of stainless steel top/line shaft of 25 to 30mm bore including threading on plain surface to match with existing threading of coupling etc, complete all as specified and directed. |
| 19 | Supply only gun metal impeller suitable for 150mm delivery dia bowl assembly as per sample including suitable size impeller. |
| 20 | Supply only gun metal impeller suitable for 100mm delivery dia bowl assembly as per sample including suitable size impeller. |
| 21 | Supply only gun metal/bronze intermediate bowl case bush bearing suitable for 150mm dia bowl assembly as per sample. |
| 22 | Supply only gun metal/bronze intermediate bowl case bush bearing suitable for 100mm dia bowl assembly as per sample. |
| 23 | Supply only CI neck ring for bowl assembly of any make/type/model for suction discharge and intermediate suitable for 150mm dia bowl assembly as per sample. |
| 24 | Supply only CI neck ring for bowl assembly of any make/type/model for suction discharge and intermediate suitable for 100mm dia bowl assembly as per sample. |
| 25 | Supply only gun metal/bronze suction/discharge bowl case bush bearing of any type/make/model suitable for 150mm dia bowl assembly as per sample. |
| 26 | Supply only gun metal/bronze suction/discharge bowl case bush bearing of any type/make/model suitable for 100mm dia bowl assembly as per sample. |
| 27 | Supply only intermediate bowl case bush bearing rubber suitable for 150mm dia delivery bowl assy as per sample. |
| 28 | Supply only intermediate bowl case bush bearing rubber suitable for 100mm dia delivery bowl assy as per sample. |
| 29 | Supply only nuts bolts/washer/stud of appropriate size/type suitable for bowl assembly/column pipe/clamp. |
| 30 | Supply only 30mm dia stainless steel pump shaft suitable for bowl assembly 9 to 18 stages in multiple length each not exceeding 3m as per sample. |
| 31 | Supply only 38mm dia stainless steel pump shaft suitable for bowl assembly 9 to 18 stages in multiple length each not exceeding 3m as per sample. |
| 32 | Supply only intermediate/suction/discharge bowl case suitable for 150mm dia column pipe bowl assembly as per sample. |
| 33 | Supply only intermediate/suction/discharge bowl case suitable for 100mm dia column pipe bowl assembly as per sample. |
| 34 | Supply only rubber gasket of 100/150/200mm bore suitable for sluice valve/NRV/column pipe. |
| 35 | Dismantlimng all parts of 3 phase 415 volts unserviceable electric motor (VT) of any type, make and capacity, cutting & removing existing burnt/short circuited winding wire complete, cleaning of core grooves and surfaces including assembling, commissioning and testing after complete repair, complete all as specified and directed. Note :- Cost of rewinding shall be measured and paid seperately under relevant item. |
| 36 | Rewinding of 3 phase electric motor of 30/40 HP VT pump with super enamelled copper winding wire of suitable gauge including impregnated paper, sleevs, varnish , tape and including suitable size of leads from starter to terminal plate, etc, complete all as specified and directed. |
| 37 | Rewinding of 3 phase electric motor of 50 HP VT pump with super enamelled copper winding wire of suitable gauge including impregnated paper, sleevs, varnish , tape and including suitable size of leads from starter to terminal plate, etc, complete all as specified and directed. |
| 38 | Rewinding of 3 phase electric motor of 60 HP VT pump with super enamelled copper winding wire of suitable gauge including impregnated paper, sleevs, varnish , tape and including suitable size of leads from starter to terminal plate, etc, complete all as specified and directed. |
| 39 | Supply only Top shaft nut for 3 phase electric motor of VT pump of capacity 25 to 60 HP as per sample. |
| 40 | Supply only terminal plate of bakelite type including nut & bolt suitable for 3 phase electric motor of VT pump of capacity 40 to 60HP as per sample. |
| 41 | Supply only terminal box cover suitable for 3 phase electric motor of VT pump of capacity 40 to 60 HP as per sample. |
| 42 | Supply only ball bearing suitable for 3 phase electric motor of VT pump capacity 30 HP to 60 HP any number, any type as per sample. Make :- NBC/TATA/SKF |
| 43 | Supply only ball/thrust bearing suitable for 3 phase electric motor of VT pump pump capacity 30 HP to 60 HP any number, any type as per sample. Make : NBC/TATA/SKF |
| 44 | Supply only ratchet plate for 3 phase electric motor for VT pump suitable for 40 to 60 HP capacity as per sample. |
| 45 | Supply only ratchet pully for 3 phase electric motor for VT pump suitable for 40 to 60 HP capacity as per sample. |
| 46 | Overhauling and repair of 3 Phase, 30 to 60 HP centrifugal pump set of any make by disconnecting electrical/mechanical connection, taking up motor from foundation, transporting to workshop to carry out repairs, replacement of minor unserviceable components/spares like suction/discharge nozzle, oil rings, casing wear ring, shuffing box, throttle bushing, wear rings, nuts, bolts, washer etc including necessary lathe work, welding, metaling, turning, polishing, repair of housing case of DE/NDE side, reassemble all the parts/ componants, refix at same position in alignment, reconnection, re-commissioning and testing to ensure efficient and smooth functioning to achieve desired discharge of pump complete all as specified and directed.Note: Defective major components/spares elaborated hereafter in respecive item of schedule shall be measured as supply only. |
| 47 | Supply only ball bearing of DE/NDE of any type any number as per existing (as per sample ) suitable for centrifugal pump of capacity 30HP to 40HP. |
| 48 | Supply only ball bearing of DE/NDE of any type any number as per existing (as per sample ) suitable for centrifugal pump of capacity 50HP to 60HP. |
| 49 | Supply only high carbon steel shaft for centrifugal pump of capacity 40HP to 60 HP as per sample |
| 50 | Supply only heavy duty shaft sleeve with bush for centrifugal pump of capacity 40HP to 60 HP as per sample |
| 51 | Supply only bearing housing DE for centrifugal pump of capacity 40HP to 60HP as per sample |
| 52 | Supply only bearing housing NDE for centrifugal pump of capacity 40HP to 60HP as per sample |
| 53 | Supply only shaft end bushes for centrifugal pump of capacity 40HP to 60HP as per sample . |
| 54 | Supply only bearing housing sleeves for centrifugal pump of capacity 40HP to 60HP as per sample. |
| 55 | Supply only check nuts & impeller key for centrifugal pump of capacity 40HP to 60HP as per sample. |
| 56 | Supply only gland packing for centrifugal pump of capacity 40HP to 60HP as per sample . |
| 57 | Supply only rubber gasket set for centrifugal pump of capacity 40HP to 60HP as per sample. |
| 58 | Supply only rubber seal for centrifugal pump of capacity 40HP to 60HP as per sample. |
| 59 | Supply only CI impeller suitable for centrifugal pump of capacity 40HP to 60 HP as per sample. |
| 60 | Supply only bearing housing studs for centrifugal pump of capacity 40HP to 60 HP as per sample. |
| 61 | Rewinding of 3 phase electric motor of 30HP Centrifugal pump with super enamelled copper winding wire of same gauge including impregnated paper, sleeves, varnish and tape, etc, complete all as specified and directed. |
| 62 | Rewinding of 3 phase electric motor of 40HP Centrifugal pump with super enamelled copper winding wire of same gauge including impregnated paper, sleeves, varnish and tape, etc, complete all as specified and directed. |
| 63 | Rewinding of 3 phase electric motor of 50 to 60HP Centrifugal pump with super enamelled copper winding wire of same gauge including impregnated paper, sleeves, varnish and tape, etc, complete all as specified and directed. |
| 64 | Overhauling and repair of 3 Phase, submersible pump set of any make/capacity by disconnecting electrical/ mechanical connection, taking out pump from existing bore well approx depth varying from 60 mtr to 90 mtr with all accessories such as column pipe, transporting to authorized workshop to carry out repair work including replacement of minor unserviceable components/spares like nuts, bolts, washer, suitable size of gas cut for flanged column pipe, reassemble all the parts/components, refix at same location/position, re-lowering in same bore well with all accessories, reconnecting and making connection with starter, commissioning and testing to ensure efficient and smooth functioning to obtain required discharge complete all as specified and directed.Note:Defective major components/spares elaborated here in after in respective item of schedule shall be measured as supply only. |
| 65 | Supply only stainless steel shaft for submersible pump of capacity 20HP to 40HP as per sample. |
| 66 | Supply only gun metal impeller suitable for submersible pump of capacity 20HP to 40HP as per sample. |
| 67 | Supply only stainless sleeves for submersible pump of capacity 20HP to 40HP as per sample. |
| 68 | Supply only gun metal bush suitable for submersible pump as per sample. |
| 69 | Supply only rubber bush suitable for submersible pump as per sample. |
| 70 | Supply only CI intermediate suction/discharge case suitable for 125/100mm bore of submersible pump as per sample. |
| 71 | Supply only pump motor coupling of submersible pump as per sample. |
| 72 | Supply only thrust plate for submersible pump set of capacity 15 HP to 40 HP as per sample. |
| 73 | Rewinding of 3 Phase, 20 to 25HP submersible electric motor with super enamelled copper winding wire of same gauge including impregnated paper, sleeves, fibre glass, varnish , tape and including suitable size of leads from stater to terminal plate, etc, complete all as specified and directed. |
| 74 | Rewinding of 3 Phase, 30 to 40HP submersible electric motor with super enamelled copper winding wire of same gauge including impregnated paper, sleeves, fibre glass, varnish , tape and including suitable size of leads from stater to terminal plate, etc, complete all as specified and directed. |
| 75 | 16 Sqmm, 3 core, 1100 Volts, copper conductor flat cable for submersible pump, making connection to motor including taking out existing unservicable cable, complete all as specified and directed. |
| 76 | 10 Sqmm, 3 core, 1100 Volts, copper conductor flat cable for submersible pump, making connection to motor including taking out existing unservicable cable, complete all as specified and directed. |
| 77 | Development of borewell untill sand free water obtained/required yield by means of pumping by Air Compressor of minimum pressure 10 Kg/sqcm (compressor shall be arranged by contractor at his own without any extra cost) complete all as directed. |
| 78 | MCCB 3 Pole, 415 V, adjustable type, 160 Amps with breaking capacity 25 KA,complete all as specified and directed. |
| 79 | MCCB 3 Pole, 415 V, adjustable type, 200 Amps with breaking capacity 25 KA,complete all as specified and directed. |
| 80 | MCCB 4 Pole, 415 V, adjustable type, 250 Amps with breaking capacity 35 KA,complete all as specified and directed. |
| 81 | MCCB 4 Pole, 415 V, adjustable type, 400 Amps with breaking capacity 35 KA,complete all as specified and directed. |
| 82 | Cutting and removing worn out threaded portion of 100mm / 150mm bore MS column pipe, making threads (both ends) to required length to match with existing connecting system etc complete all as specified and directed. |
| 83 | Supply, installation, commissioning and testing star delta starter suitable for 30HP motor relay range 30 to 50 Amp, including single phase preventor, fully automatic with sheet metal enclosure type AC, 3 phase, 415 volts, 50Hz including taking out old unsv starter, complete all as specified and directed. |
| 84 | Supply, installation, commissioning and testing star delta starter suitable for 40HP motor relay range 36 to 60 Amp, including single phase preventor, fully automatic with sheet metal enclosure type AC, 3 phase, 415 volts, 50Hz including taking out old unsv starter, complete all as specified and directed. |
| 85 | Supply, installation, commissioning and testing star delta starter suitable for 50HP motor relay range 45 to 75 Amp, including single phase preventor, fully automatic with sheet metal enclosure type AC, 3 phase, 415 volts, 50Hz including taking out old unsv starter, complete all as specified and directed. |
| 86 | Supply, installation, commissioning and testing star delta starter suitable for 60HP motor relay range 45 to 75 Amp, including single phase preventor, fully automatic with sheet metal enclosure type AC, 3 phase, 415 volts, 50Hz including taking out old unsv starter, complete all as specified and directed. |
| 87 | Supply only 150mm bore 7mm thick MS column pipe, threaded both ends with one full threaded MS coupling in multiple length, each 3m, including nuts, bolts and gasket complete all as specified and directed. |
| 88 | Supply only 100mm bore 7mm thick MS column pipe, threaded both ends with one full threaded MS coupling in multiple length, each 3m, including nuts, bolts and gasket complete all as specified and directed. |
| 89 | Supply only 125mm bore 7mm thick MS column pipe, flanged both ends with one full threaded MS coupling in multiple length, each 3m, including nuts, bolts and gasket complete all as specified and directed. |
| 90 | Supply only 100mm bore 5mm thick MS column pipe, flanged both ends with one full threaded MS coupling in multiple length, each 3m, including nuts, bolts and gasket complete all as specified and directed. |
| 91 | Supply only 80mm bore 5mm thick MS column pipe, flanged both ends with one full threaded MS coupling in multiple length, each 3m, including nuts, bolts and gasket complete all as specified and directed. |
| 92 | 150mm dia cast iron non return valve, flanged ends drilled holes including jointing material such as rubber gasket, bolts, nuts and washers of suitiable size incl commissioning and testing, complete all as specifed and directed. |
| 93 | 100mm dia cast iron non return valve, flanged ends drilled holes including jointing material such as rubber gasket, bolts, nuts and washers of suitiable size incl commissioning and testing, complete all as specifed and directed. |
| 94 | 200mm dia cast iron sluice valve class PN-1.6 with steel spindle and CI wheel flanged ends drilled holes including jointing material such as rubber gaskets, bolts, nuts & washers of suitable size incl commissioning and testing, complete all as specified and directed. |
| 95 | 150mm dia cast iron sluice valve class PN-1.6 with steel spindle and CI wheel flanged ends drilled holes including jointing material such as rubber gaskets, bolts, nuts & washers of suitable size incl commissioning and testing, complete all as specified and directed. |
| 96 | Power contactor, 3 pole, AC control 150 Amps capacity incl fixing arrangement (fixed in repair), complete all as specified and directed. |
| 97 | Electrical insulation rubber mating ISI marked and size 1m x 2m x 6mm thick (as per sample), complete all as specified and directed. |
| 98 | Supply and filling in dozing plant calcium based, high strength chlorination chemical for water disinfectant in granular form in factory sealed HDPE container (40 to 50 Kg each), chlorine concentration level 65-70%, complete all as specified and directed. |
| 99 | Disconnecting all electric/water supply connection from the suction sweepper machine/mono block pump set of capacity 3HP to 5.5HP electric driven AC single/three phase, 230 /415 Volts of any make/model from any installation, transporting to workshop dismantling, removing the burnt out windings, cleaning the stator slots and rewinding with super enamelled copper wire of suitable gauge, insulating, proper heat varnishing, returned from work shop and re-installation at same position including commissioning and testing, complete all as specified and directed. |
| 100 | Repair overhauling of suction swipper machine/mono block pump up to 2 to 5 HP by replacing worn out gland packing, gasket, bearing bushes, Scraping out of pump casing, bolts, nuts, washers etc, cleaning greasing tightening of bolts, nuts incl painting with one coat of synthetic enamelled paint to pump only, Re-installation incl alignment with motor and testing, complete all as specified and directed. |
| 101 | Replacement of rolled mild steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment cut to required shape and size for cable duct or any other description conforming to Fe-410-W (Gde-E-250) quality-A including painting with two coats of synthetic enamel paint over a coat red oxide primer complete all as specified and directed. |
| 102 | Earthing complete with GI earth plate, electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) filled with common salt and charcoal and connected to GI earth strip 25x4mm thick by means of GI nuts, bolts & washers as shown in electrical plate No. 5 of SSR Part-I and Connected to earthing test point all as specified and including necessary PCC earth pit chamber of 1:3:6 and chamber cover of 50mm thick PCC 1:2:4 with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel, protection to earth lead with GI pipe light grade 40 mm dia upto 7.5 from the earth plate electrode, including necessary excavation & earth work (in any strata) and PCC chamber including demolish existing earth pit taking out old materials complete all as specified and directed. |
| 103 | Bacteriological and chemical analysis of water (sample of borewell water) from DIRECTOR OF HEALTH SERVICES, ENVIRONMENTAL AND POLLUTION CONTROL WING, PathankotNOTE :- (a) The water sample shall be carried in sterilised bottle/watercan which will be issued by DIRECTOR OF HEALTH SERVICES, ENVIRONMENTAL AND POLLUTION CONTROL WING, Pathankot(b) The rate quoted shall be deemed to including transportation cost & cost of sterilised bottle Please Enable Macros to View BoQ information |
| 104 | Bacteriological and chemical analysis of water (sample of borewell water) from DIRECTOR OF HEALTH SERVICES, ENVIRONMENTAL AND POLLUTION CONTROL WING, PathankotNOTE :- (a) The water sample shall be carried in sterilised bottle/watercan which will be issued by DIRECTOR OF HEALTH SERVICES, ENVIRONMENTAL AND POLLUTION CONTROL WING, Pathankot(b) The rate quoted shall be deemed to including transportation cost & cost of sterilised bottle Please Enable Macros to View BoQ information |
