|
| 1 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, soft / loose soil |
| 2 | M&L for PCC(1:4:8) type D-2(using 40mm graded stone agg.) as in foundations, filling and mass concrete |
| 3 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 |
| 4 | S&F mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410-W (Gde-E- 250) quality-A |
| 5 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 6 | Surface dressing not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 7 | Removing surplus soil to a distance exceeding exc. 1.50 km but not exc. 5 km and depositing where directed |
| 8 | M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed. |
| 9 | M&L 15mm thick rendering on fair faces of brick work wall or ceiling surface in cement mortar (1:4) with using Water Proofing, Finish even and fair without using extra cement, complete all as specified and directed. |
| 10 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping/bed block including weathering slightly rounded or chamfered angles and throating as directed and including necessary form work required complete all as specified and directed. |
| 11 | M&L for preaparation of newly plastered surfaces of wall and applying two coats of Oil bound distemper over and including a coat primer complete all as specified and directed. |
| 12 | M&L Glazed ceramic tiles 300 x 600 x7mm vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including rendering 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 13 | M&L Non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed. |
| 14 | S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 15 | S&F FRP door shutter 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as per specification & drawing complete all as specified and directed. |
| 16 | M&L for powder coated aluminium ventilator, openable, (top hung and bottom portion fixed type) without sash bars with aluminium section of weight 0.55 kg/RM including glazing, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, hook & eye minimum one no on each shutter( for top hung shutter), one no aluminium tower bolt 100mm long and 75mm long aluminium handle in each shutter etc. complete all as specified and directed. Note : glazing, wire mesh shall be measured and paid separately under respective items of BOQ. |
| 17 | M&L Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering,running rails and guides) and hanging; also fastening and fixing confirming to FE 290 gde E-165 complete all as specified and directed. |
| 18 | S&F flush shutter 35mm thick solid core construction with block board core and plywood face panels,comercial type on both sides complete all as specified and directed. |
| 19 | S&F glazed skelton shutter IInd class hard wood 35 mm thick rebated and prepared to received glass, gauge etc with sash bars edges of forming plain,chamfered or rounded fitted with mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8,clause 8.24(a) etc.complete all as specified and directed. |
| 20 | S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 21 | Description all as per item No 20.00 above, but but without glazing bars. |
| 22 | S&F Mild Steel framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars complete all as specified conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 23 | S&F 3mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane all as specified and as directed. |
| 24 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 25 | M&L for preparation of new wooden surfaces, painting two coats of synthetic enamel paints over a coat of pink primer exc 10mm width or girth complete all as specified and directed. |
| 26 | M&L for preparation of new steel surfaces, painting two coats of synthetic enamel paints over a coat of red oxide primer exc 10mm width or girth complete all as specified and directed. |
| 27 | S&F 100 mm Stainless steel butt hinges medium weight cold rolled fixed to PVC doors with SS screws complete all as specified and directed. |
| 28 | S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specificed and directed. |
| 29 | S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 30 | S&F 125mm long aluminium handles cast type anodised ISI Marked |
| 31 | S&F 100mm long aluminium handles cast type anodised ISI Marked |
| 32 | S&F 75mm overall length of aluminium alloy body Floor door stopper and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 33 | S&F 200mm, mild steel ordinary rat tail rod pattern springs includng roller and roller plate complete incl necessary welding if required complete all as specified and directed. |
| 34 | S&F 250mm long MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 35 | S&F 500 ltrs capacity rotational molded polyethylene water storage tanks ISI Marked, (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 36 | S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia complete all as specified and directed. |
| 37 | S&F 20mm GI tank nipple suitable for HDPE water tank complete all as specified and directed. |
| 38 | S&F 20mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified. |
| 39 | S&F 15 mm dia brass chromium plated Bib tap fancy type chromium plated complete all as specificed and directed. |
| 40 | S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specificed and directed. |
| 41 | S&F 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specificed and directed. |
| 42 | S&F countersunk oval shape vitreous china wash hand basin of size 550X460mm/550X430mm and including 32mm dia CP waste coupling and PVC waste pipe complete all as specified and directred. |
| 43 | S&F 15mm bore dia Pillar tap, cast copper alloy, fancy type with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly-nuts screwed for iron pipes and fixed all as directed. |
| 44 | S&F 600x450x6mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner complete all as specificed and directed. |
| 45 | S&F White Vitreous China urinal Half stall type including PVC waste pipe complete all as specificed and directed. |
| 46 | S&F Chromium plated brass Urinal spreader heavy duty suitable for urinals and fixing in position for 15 mm dia pipe. |
| 47 | S&F White Vitreous China urinal partition of size 310x700mm fixed complete all as specificed and directed. |
| 48 | S&F Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including CI 'P' Trap & 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed. |
| 49 | S&F Vitreous china wash down water closet pan (pedestal pattern) including connection in drain and in flushing pipe with plastic water closet seat black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specificed and directed. |
| 50 | S&F 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever including connecting to WC and fixing on walls with rawl plug, screws and including PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 51 | S&F 15mm bore brass CP angular stop cock 2 way complete all as specified and directed. |
| 52 | S&F health faucet of ABS body with wall hook and one meter stainless tube complete all as specified and directed. |
| 53 | S&F 15mm bore dia stop valves cast copper alloys, fancy type, screwed down high pressure chromium plated (Angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 54 | S&F 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Concealed type) with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 55 | S&F brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union fixed ccomplete all as specified and directed. |
| 56 | S&F vitreous china soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 57 | S&F 5.5mm thick sheet glass corner shelf 300 mm size in bath including stainless steel railing and CP bracket complete all as specified and directed. |
| 58 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed . |
| 59 | S&F PVC connection 15 mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed. |
| 60 | S& F 20mm dia CP brass tublar towel rail 20 mm dia D type, 600mm long between flanges and fixed complete all as specified and directed. |
| 61 | S&F CP mild steel peg set of six fixed in position complete all as specified and directed. |
| 62 | S&F 100mm bore cast iron sand soil waste or vent pipes in any length with or without ears with cement joints laid in trenches, floor or fixed to wall all as directed |
| 63 | Description all as per item No 62.00 above, but fixed to walls 75mm bore of pipe. |
| 64 | S&F 75 mm dia bore cast iron bends (any radius) with duck's foot or heel rest complete all as specified and directed. |
| 65 | S&F CI floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) dia of outlet 75 mm complete all as specified and directed. |
| 66 | S&F Salt glazed stone ware gully traps, square or round mouthed type 'P' size of gully trap 150x150mm complete all as specified and directed. |
| 67 | S&F Cast iron cowls 75mm bore of pipe complete all as specified and directed. |
| 68 | M&L for 150mm nominal size (DWCPE) Double wall corrugated polyethylene pipe (SN8) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and directed. |
| 69 | S&F SFRC manhole covers and frame medium duty of overall size 900mmX450mmX80mm thick factory made and test load 10 tonnes (MD-10), strength including necessary reinforcement as per IS : 1726-1991 complete in all respect as specified and directed. |
| 70 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping/bed block including weathering slightly rounded or chamfered angles and throating as directed and including necessary form work required complete all as specified and directed. |
| 71 | M&L cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) in bed of drain pipe 150mm bore pipe including forming cradles complete all as specified and directed. |
| 72 | Dismantling of floor ,health or wall tiling incl cement mortar bedding (but not bracking ) removing rubbish of the premises complete as all specified and directed by engr-in-chrge |
| 73 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified |
| 74 | Taking down shutters of any description exc 1 sqm not exc 2 Sqm each complete. |
| 75 | S&F in repair for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 76 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2004 complete all as specified & directed. |
| 77 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles) with particle board core, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified & directed. |
| 78 | S&F SS butt hinges 125 mm long medium weight cold rolled mild steel etc |
| 79 | S&F Extruded aluminum alloy handle, fabricated type, anodized 125mm size. |
| 80 | S&F Extruded aluminum alloy handle, fabricated type, anodized 150mm size. |
| 81 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete. |
| 82 | S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete. |
| 83 | S&F in repair Rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with steel machine screws with washer, complete all as specified and as directed. |
| 84 | Taking down cement or lime plaster any description on brick or stone walls etc including recking out joints hacking for key scrubbing down with waters etc., complete all as specified and as directed. |
| 85 | M&L for rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces complete all specified and directed. |
| 86 | M&L for Rendering 5mm thick with water proofing compound in cement mortar 1:3 on fare faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement in ceiling/ Chajjas complete all as specified. |
| 87 | Supply only liquid water proofing compound and to mixed as per manufacturer instruction complete all as specified. Please Enable Macros to View BoQ information |
| 88 | Supply only liquid water proofing compound and to mixed as per manufacturer instruction complete all as specified. Please Enable Macros to View BoQ information |
