|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified. |
| 3 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed. |
| 4 | Returning filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm in any type of soil complete all as specified and directed. |
| 5 | Removal of excavated soil to a distance n. exc 50 and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified |
| 6 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation complete all as specified and as directed. |
| 7 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in foundation and mass concrete complete all as spd and as directed. |
| 8 | S&F steel work in tubular pipes (medium weight) including special shaped washer etc complete using ERW or induction butt welded tubes complete all as spd and as directed. |
| 9 | S&F plates Fe 410 (Gde E-250) (plain or chequered) square cut or notched forming holes, without any attachment complete all as spd and as directed by Engnr-in-charge. |
| 10 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. |
| 11 | M&L for preparation of newly or previously untreated surfaces of steel or iron work over 10 cms width or girth and applying two coats of synthetic enamal paint over a coat of red oxide zink chrome primer complete all as spd and as directed. |
| 12 | M & L for pre-cast cement concrete block ( Type C-1, 1:3:6 , 20 mm graded aggregate) masonry with solid blocks exc. 10 cm in width and setting in mortar 1:6 , complete all as specified and directed. |
| 13 | M&L for rendering 15mm thick cement plaster on fair faces of brick/PCC block work or concrete surfaces in cm (1:4) rendering to be finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for preparation of newly plastered surface and applying two coats of cement paint over a coat of chalk whiting on walls all as specified and as directed. |
| 15 | M&L hardcore broken stone boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface, complete all as specified and directed. |
| 16 | M & L for 100mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed. |
| 17 | M & L for 75mm thick Plain Cement Concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in floors. |
| 18 | M & L for Glass dividing strips, 3mm thick and width of strip 38mm complete all as specified and directed. |
| 19 | Supply and laying sand as in cushioning for under groung cables laid in trenches with layer of sand 8 cm thick before laying of cable and 15 cem after laying of cable incl spreading, levelling and hand punning complete all as specified and directed .Note: Only punned thickness 18cm shall be measured and paid |
| 20 | Supplying and laying un-reinforced precast concrete cable cover, class LV, Type-1, flat, size 250mm x 150mm x 40mm complete all as specified and directed |
| 21 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 70 sq mm 3.5 core complete all as specified and directed. |
| 22 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 50 sq mm 3.5 core complete all as specified and directed. |
| 23 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 35 sq mm 3.5 core complete all as specified and directed. |
| 24 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 25 sq mm 4 core complete all as specified and directed. |
| 25 | Supply and fixing G I tubing 40 mm dia light grade galvanised with all fittting and fixed fix on wall ceiling or laid in floors complete all as specified and direceted at site .( for cable protection ) |
| 26 | Supply and fix 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA for fixing in existing LT panel complete all as specified and directed. |
| 27 | Supply and installation testing and commissioning of Automatic Organic waste processsor machine fully automatic composting machine with VFD drive able to reduce the food waste volume upto 80% in 24 hours, devoloped on the principle of providing complete composting system in a single machine comprising of shredding equipement to convert organic waste product to compost by using thermophilic micro-organisms. The machine shall also be equiped with temperature maintaning system to avoid unwanted moisture and can work upto minus 35 degree celsius . The temperature can automatically be maintained by using thermal sensors. The converted compost will be rotated using mixing blade for getting fullly aerobic digesion and to maximise the microbe activation to get high quality mannure for gardens, farm feeds complete all as specified and directed. Capacity of Automated organic waste proessor 200-300 Kgs with electrical capacity 15 KVA incl PLC display panel for operation with the following salient features (a) Fully Stainless steel , fully automatic , low noise & Nil labour/process handling reliable and economical.(b) Very low opex, low floor spacing/compact in nature, no pathogens, safe for human handling.(c) No foul smell, aesthetic , stainless steel tank of life more than 20 years.(d) Ultra durable SS blade & water and shock proof SS heaters & automatic compost extraction(e) Maintenance free spur gear and insulated jacketing of oil chambers to prevent heat loss.(f) Garden & food waste can be added for processing. (g) Shaft breakage and motor breakdown protection.Note : Civil works shall be measured and paid separately. |
| 28 | Supply installation testing and commissioning of Automatic Baling Machine for dry waste of capacity 30 MT with the following specifications : (a) Pressure (kg/cm2) - 200(b) COMPRESSING CB.SIZE -1000 X 750 X 1800 mm (c) FEED OPENING - 1000 X 750 mm(d) Dimensions - 36” (l) x 36”(b) All dimensions are In inch(e) Bore Stroke -1200 mm(f) Bale Size-30 TO 40 KG (g) Cylinder & Rod -1 No ( Size : 140mm bore X 80mm rod X 1000mm Stroke) (h) Hydraulic System-GEAR CUM PLUNJER pump Systems (i) Hydraulic Oil-200 Ltrs Enklo 68 (j) Pump Capacity-LPM (200+20)(k) Operation System-Panel operated(l) Motors-7.5 Hp , 1440rpm.(m) Structure - From HEAVY Channel Supported and 10 & 12 thick plates(n) Safety -Over Load protection , Auto Pressure cut-off , limit Switchs Pusher Inter locking system. Please Enable Macros to View BoQ information |
