|
| 1 | Attending complaints related to plumbing/water supply and obtaining completion from user including minor repair such as replacement of washers, tightening of taps, tightening of check nuts/unions/sockets/PVC connection etc and making water supply functional in case of blockage, refixing of GI pipe joints, application of white cement where required, complete all as specified and directed. Note : (I ) Only experienced 01 Nos plumber shall be used to attend day to day complaints for above mentioned complaint shall be issued under respective item. (II) Contractor or his representative shall collect the complaints at 0900 hrs from complaint cell of AGE B/R-I and the complaints shall be attended / make good/rectified within 24hrs on receipt of the complaints and info the status of the complaint at 1700hrs every day to complaint cell. On failure of the same a penalty of Rs 200/- per day per complaints shall be charged. |
| 2 | Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors/windows/ventilators of wooden/aluminium/steel, re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, complete all as specified and directed. Note :- (I) Only experienced 01 Nos carpenter shall be used to attend day to day complaints for above mentioned complaint shall be issued under respective item. (II) Contractor or his representative shall collect the complaints at 0900 hrs from complaint cell of AGE B/R-I and the complaints shall be attended / make good/rectified within 24hrs on receipt of the complaints and info the status of the complaint at 1700hrs every day to complaint cell. On failure of the same a penalty of Rs 200/- per day per complaints shall be charged. |
| 3 | M&L for welding in repairs of loose joints of sliding doors, hinges, siliding door bolts, garrage doors, windows, doors, northlight framing, monkey prrofing framing etc inc at any height & inc necessary cutting and grinding all as specified and directed. |
| 4 | S&F in repairs angle/stop valves, cast copper alloy, fancy type chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore dia of pipe complete all as specified and directed. |
| 5 | S&F in repairs angle/ stop valves, cast copper alloy, fancy type chromium plated with long shank & cup (concealed) , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore dia of pipe complete all as specified and directed. |
| 6 | S & F in repairs vitreous china wash basin, white flat back size 550X400 mm, (flat back or angle back type) including brackets and including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed. |
| 7 | S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 8 | S&F in repairs 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement complete all as specified and directed. |
| 9 | S & F in repairs bib taps, cast copper alloy, 15 mm dia, Chromium Plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed. |
| 10 | S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests, including connection to trap, and to flushing pipe, anti-syphonage pipe, complete all as specified and directed. |
| 11 | S&F in repairs vitreous china wash down water closet pan (padestal pattern) with seat cover (excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and directed. |
| 12 | S&F in repairs Cast iron Traps 100 mm P or S with long arm complete all as specified and directed. |
| 13 | S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed. |
| 14 | S&F in repairs Single Piece WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 360x640x685 mm including replacement of S Trap- 110 mm complete all as specified and directed. |
| 15 | S&F in repairs 600mmx450mm bevelled edge looking mirror and fixed to wooden plug with CP brass screws and cup washers complete all as specified and directed. |
| 16 | S&F in repairs 75mm dia Cast iron floor trap/Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and directed. |
| 17 | S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 18 | S&F in repairs chromium plated Soap dish fixed to plug with chormium plated brass screws complete all as specified and directed. |
| 19 | S&F in repairs Chromium plated shower rose 125 mm swivel type, with rod complete all as specified & directed. |
| 20 | S&F in repairs PVC connections 15mm dia , 450mm long, , with PTMT nuts & washers at both ends complete all as specified & directed. |
| 21 | S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 22 | S&F in repairs CP kitchen sink waste coupling of size 100mm complete all as specified and directed |
| 23 | S&F in repairs 15 mm dia brass chromium plated Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450mm Long Braided Hoses fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed complete all as specified & directed. |
| 24 | S&F in repairs Corner glass shelf (with CP bracket) complete all as specified & directed. |
| 25 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed. |
| 26 | S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 27 | S&F vitreous china urinals, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; with grating and union for discharge pipe, complete all as specified and directed. |
| 28 | S&F in repairs 15 mm dia brass CP wall Mixer with fancy type for mixing hot and cold water with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed complete all as specified & directed. |
| 29 | Dismatling PVC Water tank Exc 250 & n exc 500 ltr and removing from site complete all as specified and directed. |
| 30 | S & F Rotational moulded PVC water storage tanks 500 Ltrs capcity three layer (cylindrical vertical with closed top) hoissted and fixed in position all as specified |
| 31 | Dismatling PVC Water tank Exc 500 & n exc 1000 ltr and removing from site complete all as specified and directed. |
| 32 | S & F Rotational moulded PVC water storage tanks 1000 Ltrs capcity three layer (cylindrical vertical with closed top) hoissted and fixed in position complete all as specified and directed. |
| 33 | S & F in repairs PTMT ball/float valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 34 | S & F in repairs tank lid cover for 500/1000 ltr tank, properly fixed in position with screws/nuts to prevent opening by monkey complete all as specified and directed. |
| 35 | Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed |
| 36 | All as described ser item np 35.00 here-in-before but 20mm bore complete all as specified & directed. |
| 37 | S&F 15 mm bore galvanized steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and directed. |
| 38 | S&F 20 mm bore galvanized steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and directed. |
| 39 | Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 40 | S&F in repairs 20 mm CP Brass spandrel suitable for wall mixer, sink/wash basin mixer, angle/stop valve, pillar tap, bib tap etc half or full turn of any description, as per site requirement complete all as specified and directed. |
| 41 | S&F in repairs 15 mm CP Brass spandrel suitable for wall mixer, sink/wash basin mixer, angle/stop valve, pillar tap, bib tap etc half or full turn of any description complete all as specified and directed. |
| 42 | S&F in repairs GI nipple 15 mm bore dia for HDPE water tank(Min weight-38 gms) complete all as specified & directed. |
| 43 | S&F in repairs GI nipple 20 mm bore dia for HDPE water tank(Min weight-45 gms) complete all as specified & directed. |
| 44 | S&F in repairs GI sockets 15 mm bore dia for GI pipeline connection complete all as specified & directed. |
| 45 | S&F in repairs GI sockets 20 mm bore dia for GI pipeline connection complete all as specified & directed. |
| 46 | S&F in repairs GI reducer 15/20 mm bore dia for GI pipeline connection complete all as specified & directed. |
| 47 | S&F in repairs Union brass of 15mm bore dia to connect iron to polyethylene complete all as specified & directed. |
| 48 | S&F in repairs Union brass of 20mm bore dia to connect iron to polyethylene complete all as specified & directed. |
| 49 | S&F in repairs Elbow/Tee of 15 mm bore dia brass all ends screwed and fixed complete all as specified & directed. |
| 50 | S&F in repairs Elbow/Tee of 20 mm bore dia brass all ends screwed and fixed complete all as specified & directed. |
| 51 | S & F in repairs 15 mm bore Fancy type Telephonic Shower (Healthfaucet), Cast Copper alloy, with chromium plated, screwed down high pressure with or without lettered Hot or Cold 1.25 mtr long screwed shanks and fly nuts, screwed for iron pipe/stop value and fixed complete all as specified & directed. |
| 52 | S&F in repairs Seat cover for pedestal pan complete all as specified and directed. |
| 53 | S&F in repairs 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Min weight 15mm - 90gms) |
| 54 | S&F in repairs internal syphon kit of flushing cistern/one piece EWC cistern portion, complete all as specified and directed. |
| 55 | S&F in repairs stainless steel towel rack with rail and hooks(For MAP Qtrs) as per sample approved by GE complete all as specified and directed. |
| 56 | S&F in repairs PVC Bath cabinet with mirror 18\\"x22\\"x4.25\\". Make: commander or equivalent complete all as specified and directed. |
| 57 | S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed. |
| 58 | S&F in repairs for plate rack of stainless steel 1 mm thick for kitchen or labotary over all size 720 x 600 x 230 mm fixed with plugs and washers on wall complete all as specified and directed. |
| 59 | S&F in repairs CP jet spray complete all as specified and directed. |
| 60 | S&F in repairs 16/18/20 inches long SS sliding channel for drawer complete all as specified and directed |
| 61 | S&F in repairs PVC waste pipe 32/40 mm dia suitable for wash basin/sink complete all as specified and directed |
| 62 | S&F in repairs Wall mixer 3-in-1 way telephpnic/Non telephonic long sank 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 63 | S&F in repairs sink mixer with swan neck 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed for iron pipe and fixed complete all as specified and directed. |
| 64 | S&F in repairs sink cock swan neck 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed for iron pipe and fixed complete all as specified and directed. |
| 65 | S&F in repairs MS door springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate and fixing in MS frame or wooden frame complete all as specified and directed. |
| 66 | S&F in repairs pair of brass adjustable legs for wall mixer including washers and packing as per site requriment (15/20mm) complete all as specified and directed. |
| 67 | Cleaning of water tanks of capacity not exceeding 1000 ltr by removing all scale and dirt, etc from tanks and from mouth of circulating pipes etc complete all as specified and directed. |
| 68 | S&F in repairs 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 69 | S&F in repairs 75mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed. |
| 70 | S&F in repairs 110mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed. |
| 71 | S&F in repairs 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 72 | S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 73 | S&F in repairs 75mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed. |
| 74 | S&F in repair 110mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed. |
| 75 | S&F in repair 20mm Dia Aluminium alloy anodised curtain rod decorative fancy type with brackets complete all as specified & directed. |
| 76 | Dismantaling asbestos cement sheets(corrugated, semicorrugatd) in roof coverings complete all as specified and directed. |
| 77 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed. |
| 78 | S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed. |
| 79 | Dismantling mild steel or wrought iron work in roof trusses,gratings etc and similar work complete all as directed |
| 80 | M&L for Dismatling timber scantling 40 sqcm and above in any position ,unframed work complete all as specified and directed |
| 81 | M&L for mild steel work in roof trusses,purlins,rafters,wind ties,crane gantries,posts,rails and fastenings and heavy bracket framing (Beam,Tee,Angle,Channel or Flat sections) including distance pieces,cleats etc complete all as specified and directed. |
| 82 | M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified. |
| 83 | M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed. |
| 84 | S&F in repairs 140mm overall length of cover, floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed. |
| 85 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads as directed. |
| 86 | S&F sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in each panel 3 mm thick complete all as per specified and directed. |
| 87 | S & F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete as specified and directed. |
| 88 | S&F sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in each panel 5.5 mm thick complete all as per specified and directed. |
| 89 | S & F in repairs Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed. |
| 90 | S&F in repairs butt hinges, medium weight, cold rolled mild steel, 75mm size complete all as specified and as directed |
| 91 | S&F in repair butt hinges, medium weight, cold rolled mild steel, 100mm size complete all as specified and as directed |
| 92 | S&F in repair door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed. |
| 93 | S&F in repair SS central door lock with key arrangement, 150mm long, suitable for door shutters in MAP Qtr fixed complete all as specified & directed. |
| 94 | Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc complete all as specified & directed. |
| 95 | M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) complete all as specified & directed. |
| 96 | M&L old size brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks Complete all as specified and directed. |
| 97 | Taking down cement plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m Complete all as specified and directed. |
| 98 | M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth (without using extra cement) complete all as specified & directed.Note:- Water proofing compound shall be measured and paid seperately. |
| 99 | Supply only integral water proofing compound complete all as specified & directed. |
| 100 | M&L for applying Two coats of 100% Premium acrylic emulsion paint over 2mm thickness putty, having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified & directed. |
| 101 | M & L for 15 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, surface finished even & smooth with using extra cement complete all as specified and directed. |
| 102 | M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed |
| 103 | M&L for 1 mm thick applying a layer of JK/ Birla putty on wall surfaces including cornics etc for proper levelling of plaster complete all as specified and directed. |
| 104 | M&L for preparation of Complete removal of existing treatment plastered old surface of of wall by applying 2mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified and directed. |
| 105 | M&L for removal of existing treatment , plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper white or tinted over a coat of primer complete all as specified and directed. |
| 106 | M&L for preparation of old decorated surfaces and applying one coat of white wash complete all as specified and directed. |
| 107 | M&L for preparation of old decorated surfaces of plastered or un-plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 108 | M&L for Providing cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in copings,platform,kerbs etc including weathering, slightly rounded or chamfered angles and throating complete all as specified & directed. |
| 109 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed. |
| 110 | S&F Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed. |
| 111 | S&F Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 112 | S&F Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed. |
| 113 | S&F Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 114 | M & L for non skid ceramic coloured /printed tiles 7 to 8 mm thick (square / Rectangular)area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles, laid over screed bed or bedding layer 15mm thick in cement mortar(1:6) for laying floor finishes Complete all as specified and directed. |
| 115 | M & L for glazed ceramic coloured / printed tiles 450mm x 300mmX7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles,over rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting & vertical Tiles complete all as specified and as directed. |
| 116 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in mortar complete all as specified & directed. |
| 117 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 10mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed. |
| 118 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. |
| 119 | S & F for Aluminium anodised snap grid frame work for false ceiling comprising of following section for making partitions of 605 X 605 mm size fixed to walls with rawl plugs and screws and hang to roof with s 6 mm dia. G.I. (upto1200mm length) adjusting levelfixed to roof slabs by means ofceilling cleats made out of G.I.flat 40 x 3 mm size 60mm longand expansion hold fasteners12.5mm dia. 40mm long complete all as specified size of main tee shall be :-(i)36.5mmx25mmx1.4mm thick, Weighing 0.24Kg/Rm(ii)Cross Tee 23.5mmx36.4mmx1.4mm thick Weighing 0.191 Kg/Rm and (iii)Wall angle 40mmx25mmx2mm thick. Weighing 0.36 Kg/Rm |
| 120 | S & F 4 mm thick non asbestos fiber designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 600 X 600 mm size fixed in ceiling with and including dusting of surface complete all as specified and directed |
| 121 | S&F in repairs 5mm thick hollow PVC Sheet wall Panelling (sand wiched between the longitudinal grid in PVC Sheet) any pattern fixing at site with PVC beading/fillet complete all as specified & directed. |
| 122 | Taking down wooden chowkhat or frame area not exc 1.5 sqm each with shutter (without taking off shutter from frame) as directed. |
| 123 | Taking down wooden chowkhat or frame area exc 1.5 sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) as directed. |
| 124 | Taking down shutters ( per leaf ) of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed. |
| 125 | S & F 30 mm thick Second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze without sash bars, edges of framing plain fitted with cut and mitred beads for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(a) fitted to chowkats, complete all as specified & directed. |
| 126 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed. |
| 127 | Factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wwod powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 128 | Factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified & directed. (Note:- stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 129 | M & L for Anodised aluminium Powder Coated (of Approved colour ,Thickness or powder coating not less than 50 micron) door Shutter , side hung type without sash bars, aluminium sections weighing 0.55 kg/m including frame of chowkhats, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium Complete fittings and 5mm glass as required complete all as specified and directed. |
| 130 | M & L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) sliding window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium and Sliding Arrangement, including aluminium grills as approved and 4mm glass Complete fittings as required complete all as specified. |
| 131 | S & F butt hinges, medium weight, Mild steel and fixed, size of hinges 100mm complete all as specified and directed. |
| 132 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed. |
| 133 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 134 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified & directed. |
| 135 | M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified & directed. Please Enable Macros to View BoQ information |
