|
| 1 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/ grills/ wire mesh etc., all as specified and as directed by the Engineer-in-Charge. |
| 2 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge. |
| 3 | Taking down shutters of any description exc. 1sqm but not exceeding 2sqm each including builders hardware as directed by the Engineer-in-Charge. |
| 4 | Taking down shutters of any description n.exc. 1sqm each including builders hardware as directed by the Engineer-in-Charge. |
| 5 | M&L for Second class Hard wood,plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted all as specified and as directed. |
| 6 | S & F small articles of steel such as hold fast, etc of Gde Fe 410-0 or Fe-290 Gde E-165 complete all as specified and as directed. |
| 7 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in hold fast etc completed all as specified.. |
| 8 | M & L for preparing and treating ends of posts, back of chowkats with coal tar black paint, area tarred exc. 0.10 sqm but not exc. 0.50 sqm all as specified or as directed. |
| 9 | M & L for preparing and treating small articles such as hold fasts with coal tar black paint, area tarred not exc. 0.10 sqm all as specified or as directed. |
| 10 | M&L for 35mm thick second class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed. |
| 11 | M&L for 30mm thick second class hard wood Glazed and skeleton window shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed. |
| 12 | M& L for 30 mm thick flush door shutter, solid core construction , with block board core and plywood face panels, commericial type on both side etc. complete all as specified and as directed. |
| 13 | S&F Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and as directed. |
| 14 | S&F in repair Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification and directed. |
| 15 | S&F in repair Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed. |
| 16 | S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc., complete all as specified and as directed. |
| 17 | S&F Aluminium handles cast type anodised 150 mm size complete all as specified and as directed. |
| 18 | S& F Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed. |
| 19 | S& F 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 20 | S&F Aluminium anodised barrel tower bolts, extruded section of size 200mm long all as specified. |
| 21 | S&F Butt hinges, 75mm size medium weight cold rolled mild steel Etc., complete all as specified and as directed. |
| 22 | S&F Aluminium anodised barrel tower bolts of extruded section 100mm long all as specified. |
| 23 | S&F Aluminium handles cast type anodised 100 mm size complete all as specified and as directed. |
| 24 | S&F 100mm Butt hinges, extruded aluminimum alloy with galavanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified & directed. |
| 25 | S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames as specified and as directed by the Engineer-in-Charge. |
| 26 | M&L for applying two coat of Synthetic enamel paint over a coat of pink primer for wooden surfaces including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed. |
| 27 | S&F in repair Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames fixed in repairs all as specified and as directed by the Engineer-in-Charge. |
| 28 | S&F Sheet glass 4.0mm thick, plain ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description ) from wooden/Aluminimum frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as spd |
| 29 | S&F Sheet glass 5.5mm thick, plain ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane fixing to aluminium frame work including hacking out old broken glass (any thickness, size, quality or description ) from Aluminium section fixed with beads/glazing clips all as spd |
| 30 | S&F figured glass 4.0mm thick,pin head type & glazing with oil putty in square n exc 0.5 sq.m in each pane from Aluminium section fixed with beads/glazing clips all as spd |
| 31 | S&F in repairs Butt hinges, 75mm size medium weight cold rolled mild steel Etc., |
| 32 | S&F in repairs Butt hinges, 100mm size medium weight cold rolled mild steel Etc., |
| 33 | S&F in repairs Aluminium anodised barrel tower bolts of extruded section 100mm long all as specified. |
| 34 | S&F in repairs Aluminium anodised barrel tower bolts, extruded section of size 200mm long all as specified. |
| 35 | S&F in repairs Aluminium handles cast type anodised 100 mm size complete all as specified and as directed. |
| 36 | S&F in repairs Aluminium handles cast type anodised 150 mm size complete all as specified and as directed. |
| 37 | S& F in repairs Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed. |
| 38 | S& F in repairs Mild steel sliding door bolts, 300mm longplate type, stove enamelled black, with bright bolt not lessthan 12mm dia with and including a minimum of 6 boltsand nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 39 | S & F in repairs mild steel 300 mm , ordinary rat rail rod pattern springs including rollar and rollar plate inc welding complete all as specified and directed. |
| 40 | S& F in repairs 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 41 | S&F aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for doors/ windows /ventilator/ partition, glassing clipswith one or more tracks including joining cleats fot fixing complete all as directed by Engr-in-Charge. |
| 42 | S&F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified. |
| 43 | S&F in repairs aluminium powder coated sliding window (for width 1.00 above and openable for below 1.50 M width) using alumimium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including aluminium anodised snap beads, screws and fixed alongwith same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wiremesh shutters) etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh hinges, bow handles, locking arrangements etc complete all as directed by Engr-in-Charge. |
| 44 | M & L for 12mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with scruwes to aluminium frame work shutter.etc all as specified and as directed by Engr-in-charge |
| 45 | S&F for 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and as directed |
| 46 | S & F in repairs 18/19 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in repair all as specified |
| 47 | S & F in repairs 12 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in repair all as specified |
| 48 | M & L for 6mm thick external teak wood lipping over 18/19mm thcik particle board/plywood fixed with nails |
| 49 | S&F continous (piano)hinges mild steel,bright finish or electro galvanised width of flaps (when open)in mm 30mm complete all as specified and directed. |
| 50 | Supply and Fix in repair Locks, drawer, cupboard shutters grade I, size 75 mm Brass 4 levers complete all as specified and directed. |
| 51 | S & F in repairs stainless steel Cabinet Hinges/self closing hinges (Bombay Hinges) complete all as specified and as directed |
| 52 | S & F in repairs Magnet closures to cabinet cupboards complete all as specified and as directed |
| 53 | S & F in repairs Cast Aluminium (Die cast ) body door closer bydraulically regulated, designation No.2 univrsal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed. |
| 54 | M& L in repairs Brass mortice lock vertical type size 100 mm 4 leavers with stain less steel handle set suitable for right or left, inside or out side opening doors complete all as specified and as directed. |
| 55 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete including two coats of synthetic enamel paint over one coat of red oxidc primer all as specified and directed. |
| 56 | M&L 2nd class hard wood Plain fillets.square,rectangular or triangular in section,exc 6sqm nexc 13 sqmm clean sawn, secured with nails or brads.complete all as specified and directed. |
| 57 | S&F in repair Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 58 | Supply and fix Fully Glazed door shutters made out of 12mm thick toughened glass suitable for opening not exc. 1.20m wide as approved by GE, drilling holes for fixing handles including provision of Stainless Steel matt finish handle 400mm-2Nos, suitable locking arrangements, centre lock, Stainless steel body floor spring, patch fitting consists of Bottom patch, top patch and top pivot with Stainless steel fixing plate etc., complete incl taking down old unserviceable glass door all as directed by the Engineer-in-Charge.Note : The unit rate quoted shall be deemed to include all necessary builders hardware except door closer complete all as specified and as directed. |
| 59 | S&F of Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including removing of old floor spring complete all as specified and as directed. |
| 60 | Supply and Fix in repairs Floor locking arrangements with brass lock and complete accessories suitable for 12mm thick toughened glass door with complete accessories shall match with existing make Dorma or Pag in quality and rate complete all as specified and as directed. |
| 61 | Supply and fix Door closers, heavy duty with pivot and connected accessories, Satin stainless steel finish, sustainable for long duration suitable for 12mm thick toughened glass shutters all as per BTS 80 series of Dorma or equivalent of PAG or any reputed make as approved by GE including taking down old unserviceable door closure complete all as specified and as directed. |
| 62 | Dismantling of wall and ceiling boards/Partition ( fibre pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and as directed. |
| 63 | M & L for galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing with stapples on snap grid by means of GI wires not less than 4mm dia hooks and raw plug etc centre of amke. GYPTECH/ARMSTRONG or equivalent all as directed by Engr-in-Charge |
| 64 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. |
| 65 | 15 mm thick rendering in patches CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 66 | 15 mm thick rendering in patches on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 incl water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY |
| 67 | Supply only Liquid water proofing compound shall match with existing make SIKA/FOSROC/CHOKSEY in quality and rate. |
| 68 | Preparation of new plasteres surfaces of wall and applying plaster of paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed. |
| 69 | Material and labour for applying two or more coats of 100% premium acrylic mulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed by the Engineer-in-Charge shall match with existing make APEX of Asian or equivalent of shalimar / Nerolac/ Berge in quality and rate. |
| 70 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 71 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 72 | M&L for providing and fixing Gypsum board 12mm thick in ceiling fixed with screw to existing frame work, applying plaster of paris putty of 2mm thickness and Distempering with 1st quality acrylic disptemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer of required shade and colour complete as per manufacturer's specification (Two Coat) complete all as specified and directed. |
| 73 | S&F Galvanised steel water tubing medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed to walls/ceilings or laid in floors etc., complete including taking up (or) down the existing GI pipe completely all as specified for following bore of pipes.(a) 15mm dia bore |
| 74 | S&F Galvanised steel water tubing medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed to walls/ceilings or laid in floors etc., complete including taking up (or) down the existing GI pipe completely all as specified for following bore of pipes. (b) 20mm dia bore |
| 75 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including takingup or down in the existing pipe line completely all as specified for following pipes :-(a) 20mm outer dia bore |
| 76 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including takingup or down in the existing pipe line completely all as specified for following pipes :-(b) 25mm outer dia bore |
| 77 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including takingup or down in the existing pipe line completely all as specified for following pipes :-(c) 32mm outer dia bore |
| 78 | S&F in repairs 15mm dia bib taps fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule as specified |
| 79 | S&F in repairs 15mm dia pillar taps fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes as specified |
| 80 | S&F in repairs 15mm PVC connection 450mm long of superior quality as specified. |
| 81 | S&F in repairs Ball valves 15mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed. (min. weight 15mm-142 gms) complete all as specified and as directed. |
| 82 | S&F in repairs Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed. (min. weight 20mm-210 gms) complete all as specified and as directed. |
| 83 | S&F in repairs Ball valves 25mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed. (min. weight 25mm-455 gms) complete all as specified and as directed. |
| 84 | S & F in repairs Vitreous china wash down water closet (pedestal pattern ) white (excluding fixing bolts flushing cistern and flush pipe ) as specified |
| 85 | S&F in repairs Vitreous china Wash Hand Basin, white, flat back of size 550x400mm excluding taps, waste, chain and plug and porcelain stopper out including brackets as specified |
| 86 | S&F in repairs Vitreous china squatting pan orissa pattern size 550x440mm white with integral foot rest (excl flushing cistern and flush pipe ) and making good to floor as specified |
| 87 | S&F in repairs Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe) as specified |
| 88 | S&F in repairs vitrous chain wash basin of oval type including waste coupling, waste pipe and brackets etc all as specified and directed by engr in charge |
| 89 | S&F in repairs vitrous china wash down water closet pan, dual flush system cascade dual flush selected colour with built in cistern floor mounted type with P or S trap and matching seat cover including all fittings all as specified and directed by Engr-in-Charge. |
| 90 | S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufactures instruction and as directed by the Engineer in charge including removal of existing cistern etc. |
| 91 | S & F in repairs 15mm Bib taps cast fancy type, chromium plated with crutch or butterfly handle, screwed for iron pipe or for brass ferrule for fancy type Chromimum plated shall match with existing make-jaquar in quality and rate. |
| 92 | S & F in repairs 15 mm dia bore pillar tap long neck with aerator fancy type cast copper alloy with crutch handle screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe or for brass ferrule etc complete and as directed by the engr in charge shall match with existing make-jaquar in quality and rate. |
| 93 | S&F in repairs 15mm bore PVC bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) all as specified |
| 94 | S&F in repairs 15mm bore pillar taps fancy type, standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms) all as specified |
| 95 | S&F in repairs 15mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-92gms) |
| 96 | S&F in repairs 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for uniori all as specified and fixed in repairs complete all as specified and as directed. |
| 97 | S&F in repairs Wall mixer 3-in-1 system with provision for both telephone shower and over head shower as directed by Engr-in- charge shall match with existing make-jaquar in quality and rate. |
| 98 | S&F in repairs bottle trap of CP having minimum water seal of 25mm 32mm bore dia of discharge pipe complete all as specified and as directed. |
| 99 | S&F in repairs angular stop cock 15 mm dia brass chromim plated fancy type with long shank, screwed down high pressure with crutch or butter fly handle screwed down both ends for iron pipe or for union of jaquar all as specified by the engr in charge |
| 100 | S&F in repairs toilet paper holder with flap recessed type matt chromium plated and all as specified and directed by engr in charge shall match with existing make-jaquar in quality and rate. |
| 101 | S&F in repairs soap dish, matt finished chromium plated (MCH/Colour CP) and all as specified and directed by engr in charge shall match with existing make-jaquar in quality and rate. |
| 102 | S&F in repairs health faucet (hand shower with 1 M flexible tubbe with wall hook, chromium plated all as specified and as directed by the Engineeer in charge shall match with existing make-jaquar in quality and rate. |
| 103 | S&F in repairs towel rail 600mm long with flanges, chromium plated all as specified and directed by engr in charge shall match with existing make-jaquar in quality and rate. |
| 104 | S&F in repairs for 15 mm bore sink cock with swinging spout wall mounted model with wall flange shall match with existing make-jaquar in quality and rate. |
| 105 | S&F in repairs tumbler holder chromium plated shall match with existing make-jaquar in quality and rate all as specified and directed by engr in charge. |
| 106 | S&F in repairs for two way bib tap 15 mm bore chromium plate with crtuch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union shall match with existing make-jaquar in quality and rate all as specified and directed. |
| 107 | S&F in repairs Sink made out of stainless steel 1mm thick with drainage board for kitchen and laboratory with plugs washers and wastes, including beading in cement mortar to dwarf of including fixing canti lever brackets and connecting union to pipe overll size 915mmx460mm bowl size for 410mmx330mmx160mm including 40mm size CP waste coupling and PVC waste pipe complete shall match with existing make nirali/jayna/diamond/parryware in quality and rate all as specified and as directed by the Engineer-in-Charge. . |
| 108 | S&F in repairs plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device of make fixed with CI brackets of shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. . |
| 109 | S&F in repairs health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 110 | S&F in repairs toilet paper holder with flap recessed type matt chromium plated as per cat No.BA-48 of shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 111 | S&F in repairs PVC waste pipe for wash hand basin (size 31/32mm x 800mm length) shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. . |
| 112 | S&F in repairs PVC waste pipe for Sink waste pipe (size 38/40mm x 1150mm length) shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 113 | S&F in repairs of Brass chromium plated 15mm wall mixer valve 2-in-1 for mixing hot and cold water incl provicion only for over head shower, fancy type of make Prayag all as specified and directed |
| 114 | S&F in repairs 15mm dia angle cock with flange, chromium plated of shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 115 | S&F in repair 15mm dia two way bib cock with flange, chromium plated shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 116 | S&F In repair 32mm brass full thread SS waste coupling for wash hand basin shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 117 | S&F In repair CP overhead shower ABS round with 225mm brass arm & flange shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 118 | S&F in repairs conceled stop cock regular body 15mm with flange plate, chromium plated of shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 119 | S&F in repairs soap dish ,matt finished chromium lated (MCH/Colour) of shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 120 | S&F in repairs corner glass shelf superior quality matt finished crromium plated (MCH/Colour CP ) with bracket and fittings of shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 121 | S&F in repairs glass shelf matt finished chromium plated (MCH/Colour CP) of size 600mm long with bracket and fittings of shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 122 | Supply and fix in repair CP towel ring of shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 123 | S&F in repair CP towel rail 20\\"(500mm long) shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 124 | S&F in repair Stainless steel plate rack of size 910mm x 780mm x 250mm (31'' x 36 \\" 10\\") with separators and 3 tier shelves, provisionsing of hook 9 Nos made out of stailness steel sheet of grade AI SI 304 of shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 125 | S&F in repair CP cockroach trap (127mmx127mm) with waste hole shall match with existing shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 126 | S&F in repair SS round grating for floor trap of male and female pattern 4\\" (101mm) of shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. . |
| 127 | S&F in repair CP sink cock regular spout with flange(wall mounted ) of shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 128 | S&F in reapir PVC cabinet mirror PTMTof size 400 x 500mm with sided shelves fancy type of superior quality shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 129 | S&F in repair 15mm dia CP bib cock nozzle with flange (washing machine tap) shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. . |
| 130 | S&F in repair CP centre hole basin mixer w/o pop up shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 131 | S&F in repair CP Pillar cock extended body shall match with existing make- prayag in quality and rate all as specified and as directed by the Engineer-in-Charge. |
| 132 | M & L in repair Gun metal globe or gate valve with iron wheel head screwd both ends for iron pipe and fixed for 25 mm dia bore pipes |
| 133 | M & L in repair Gun metal globe or gate valve with iron wheel head screwd both ends for iron pipe and fixed for 20 mm dia bore pipes |
| 134 | S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs including dismantling of existing tank of any description and S&F 20 mm ball PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe. |
| 135 | S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs including dismantling of existing tank of any description and S&F 20 mm ball PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe. |
| 136 | S&F in repairs covers for Rotational moulded polyethylene water tank of any capacity complete all as specified and as directed by the Engineer-in-Charge. |
| 137 | Cleaning & removing all scale & dirt, etc. from tanks & from mouths of circulating pipes, etc.exc 250 & n exc 500 litres |
| 138 | Cleaning & removing all scale & dirt, etc. from tanks & from mouths of circulating pipes, etc.exc 500 & n exc 1000 litres |
| 139 | Cutting holes into or through brick walls built in cement mortar and making good in PCC (1:2:4) type B-1 as required Superficial area not exc 150 Sq CM complete all as specified and as directed |
| 140 | PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints fixed to walls /floor as in spouts etc complete including dismantling existing pipes all as specified and directed. |
| 141 | PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls /floor complete as in spouts etc including dismantling existing pipesall as specified and directed. |
| 142 | PVC (SWR) bends with oval access door 110mm fixed in repairs complete all as specified and directed. |
| 143 | PVC (SWR) bends with oval access door75mm fixed in repairs complete all as specified and directed. |
| 144 | PVC (SWR) vent cowl 110mm fixed in repairs complete all as specified and directed. |
| 145 | PVC (SWR) juncton single (single T ) equal or un equal with access door75 mm fixed in repairs complete all as specified and directed. |
| 146 | PVC (SWR) juncton single (single T ) equal or un equal with access door110mm fixed in repairs complete all as specified and directed. Please Enable Macros to View BoQ information |
