|
| 1 | SECURITY COMPOUND WALL |
| 2 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precastconcrete articles portions ordered to be dismantled complete all as specified and as directed. |
| 3 | Dismantling Fencing wire mesh any type complete all as specified and as directed. |
| 4 | Dismantling posts or struts (wood, steel or RCC) any description, including taking out embedded portion and making good disturbed posts embedded in concrete, brick work, masonry etc., complete all as specified and as directed. |
| 5 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 6 | Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed. |
| 7 | Excavating in trenches, not exc 1.5 m wide and not exc 1.5 in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc., not exc 10 sq m on plan and not exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed. |
| 8 | Returning, filling in including spreading, leveling, watering and well ramming in layers nt exceeding 25 cm thick using approved excavated soil complete all as specified and as directed. |
| 9 | Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and as directed. |
| 10 | Material and labour for Plain Cement Concrete, 1:4:8, type D2 as in foundations, filling and mass concrete complete all as specifed and as directed |
| 11 | Material and labour for Plain Cement Concrete, type B2, 1:2:4 using 40mm graded stone aggregate as in surface channels and drains including necessary form work complete all as specified and as directed. |
| 12 | Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted in retaining walls, abutments and similar work built in CM 1: 6 complete all as specified and as directed. |
| 13 | Material and labour for walling of random rubble except stone [using serviceable stones retrived from demolition] uncoursed, well bonded, bedded and solidly hearted in retaining walls, abutments and similar work built in CM 1: 6 complete all as specified and as directed except stone Note :Stones obtained from demoltion shall be used against this item. |
| 14 | Material and labour for High Strength Corrosion Resistant Deformed Steel Bars produced by Thermo Mechanical Treatment process [TMT] steel bars of grade Fe-500D in reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed. |
| 15 | Material and labour for High Strength Corrosion Resistant Deformed Steel Bars produced by Thermo Mechanical Treatment process [TMT] steel bars of grade Fe-500D in reinforcement, 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed. |
| 16 | Material and labour for RCC M 30 (Design mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.Note: Design mix approved by GE for any ongoing work at Tuticorin area shall be followed for this work. |
| 17 | Material and labour for RCC M 30 (Design mix) using 20mm graded stone aggregate as in columns, piers, posts and struts etc., complete all as specified and directed.Note: Design mix approved by GE for any ongoing work at Tuticorin area shall be followed for this work. |
| 18 | Material and labour for RCC M 30 (Design mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.Note : Design mix approved by GE for any ongoing work at Tuticorin area shall be followed for this work. |
| 19 | Material and labour for RCC M 30 (Design mix) using 20 mm graded stone aggregate as in lintels over 1.5m span complete all as specified and as directed.Note : Design mix approved by GE for any ongoing work at Tuticorina area shall be followed for this work. |
| 20 | Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed. |
| 21 | Material and labourfor formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide etc., complete all as specified and as directed. Note : Where RCC/PCC band in walls, spanning and opening, the formwork soffit only shall be measured separately |
| 22 | Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also beams, etc.plays between floors and beams etc., complete all as specifed and as directed. |
| 23 | Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finshed surfaces of concrete complete all as specified and as directed. |
| 24 | Supply and Fix Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging gate fittings congorming to Fe-410W, Gde - E-250, quality - 'A' and fixing complete all as specified and as directed. |
| 25 | Supply and fix mild steel flat, angle, channel etc of suitable size as in pickets brackets,post and struts in fencing including cutting top as shape as directed, drilling holes, notching forwire etc flat iron fillets (for securing chain link fencing) with and including MS screw bolt not exceeding 5cm longmand neck dia 11-15 mm, machine made wih hexagonal or square head a one end and screwed the other or screwed the both ends, fitted with washers and hexagonal nuts and drilling etc., of section confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 26 | Supply and fix in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., as directed complete all as specified and as directed.Note : Each line wire to be measured. |
| 27 | Supply and fix 600mm dia punched tape concertina coil as per IS 4454 with galvanised coating and punched tape material as per IS: 513 deep drawn quality with galvanising coating having medium barbs (bars length 24+ 1mm, pitch between two barbs 35+1mm) fixed in position and secured to both sides of shaped angle iron post, stretched to a length of 6m to achieve 610mm dia, weighing 9kg(+5% without handles and spikes) as in fencing to steel post and to another coil / MS ribs including fixing with special galvanised fasterners such as J clips, 'C' Clips, U Clips all as specified and directed. Note: After stretching the coil, the length of the compound wall on which it has been stretched shall be considered for measurement |
| 28 | Material and labour for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long Diameter of neck 11 to 15mm in repairs complete all as specified and directed. |
| 29 | Material and labour for Brick work with subclass 'B' bricks, straight οr curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified. |
| 30 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed. |
| 31 | Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work and finished the surface fair and even complete all as specified and as directed. |
| 32 | Material and labour for flush pointing to random rubble masonry, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and as directed. |
| 33 | Material and labour for rendering 15mm thick on fair face of brick work or concrete surfaces in CM 1:4 including mixing with water proofing compound as per manufacturer's instruction etc., complete all as specified and as directed.Note : WPC will be measured & paid seperately. |
| 34 | Supply only high-performance integral liquid waterproofing admixture with corrosion inhibitors ShaliPlast® IW CI of STP Ltd or equivalent of other specified makes for external plastering in coastal area complete all as specified and as directed |
| 35 | Material and labour for 40 mm thick Plain Cement Concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in flooring including finishing even and smooth without using extra cement complete all as specified and as directed. |
| 36 | Material and labour for moorum/ Red Bajri filling in floor or paving, laid in layers not exceeding 15cm thick, spread levelles and rammed including watering complete all as specified and as directed. |
| 37 | Material and labour for hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface of broken bricks complete all as specified and as directed. |
| 38 | Material and labour for 100mm thick Plain cement concrete 1:3:6, type C2 using 40mm graded stone aggregate as in pavings/ flooring etc., complete all as specified and as directed. |
| 39 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 40 | Material and labour for factory made rubber moulded precast concrete coloured interlocking paver block with glazed finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with using grey cement and pigment as in pavings/foot path etc., complete all as specified and as directed. |
| 41 | M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in landing, cover slab (for man holes etc) shelves and similar articles with plain face and set in CM (1:4) including use & waste of formwork etc., complete all as specified and as directed.Note:- Reinforcement will be measured and paid seperate. |
| 42 | Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 43 | Material and labour for complete removal of existing treatment on walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified. |
| 44 | Material and labour for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of zinc primer complete all as specified and as directed |
| 45 | Material and labour for preparation of old steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel complete all as specified and as directed. |
| 46 | Material and labour for preparation of newly plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified and as directed. |
| 47 | Material and labour for preparation of old decorated wall surfaces and applying one coat of white washing complete all as specified and as directed. |
| 48 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge. |
| 49 | Material and labour for 50 mm thick Plain Cement Concrete 1:3:6, type C-2 using 40 mm graded stone aggregat as in sub base/ flooring etc., complete all as specified and as directed. |
| 50 | Material and labour for coloured Vitrified Ceramic tiles dark shade of grade B-I (a),9-10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. |
| 51 | Material and labour for coloured Vitrified ceramic tiles dark shade of grade B-I(a), 9-10mm thick of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over a backing coat in Cement Mortar 1:4, 10mm thick on fair faces of brick or concrete surfaces all as specified and as directed. |
| 52 | Supply and Fix in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 53 | Supply and Fix in repairs Aluminium Door closer hydraulically regulated(extruded section), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 54 | Supply and Fix in repairs powder coated aluminium sections for frame of doors, windows, partitions etc., having thickness of powder coating not less than 50 micron and colour as approved by GE/ Engineer - in Charge with one or more rebates including necessary joining cleats etc., complete all as specified and directed. |
| 55 | Supply and fix 4mm thick plain sheet glass, ordinary quality and glazing with oil putty in square of any size in each pane complete all as specified and as directed. |
| 56 | Material and labour for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with lipping fixed with screws to timber frame work in repairs complete all as specified and directed. |
| 57 | Material and labour for preparation of old treated surfaces of walls and applying one coat of oil emulsion distemper (OBD) on walls complete all as specified and as directed. |
| 58 | Supply and fix telescopic channels/drawer slides 500mm long of Zinc coated mild steel for modular kitchen baskets with load carrying capacity of 45Kg complete all as specified and as directed.Make : SLEEK-Model No. HICH1034 or Equivelent in HETTICH / KAFF /EBCO |
| 59 | Supply and fix Stainless steel auto closing/soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for suitable for Modular kitchen/cup board shutters complete all as specified and as directed.Make : SLEEK / HETTICH / KAFF /EBCO |
| 60 | Supply and fix Mortice lock brass, 4 levers, vertical type, size 100 mm for aluminium/ wooden doors complete all as specifed and as directed |
| 61 | Material and labour for 19 mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work including 0.9 mm thick Decorative laminate both side type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions etc., complete all as specified and as directed. |
| 62 | Supply and fix WPC louvers wall panelling with 12mm thick 100% Water Proof, 100% Termite & Borer Proof, Flame Retardant and maintenance free, high quality, heavy-duty Wood Polymer Composite (WPC) board, specifically designed to withstand UV exposure, rain & humidity and suitable for exterior applications having density not less than 600 Kg/Cum with Matt or Semi-matt Finish, Plain / Grooved / Wood-grain embossing Surface Texture as approved by the Engineer-in-Charge in form Hollow or solid rectangular slats suitable for louver / cladding use complete all as specified and as directed. Please Enable Macros to View BoQ information |
