|
| 1 | M&L for repair to pot holes any depth n. exc 4.00 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, cutting around edges to at least 25mm in depth, putting in ready mix cold road patching premix as specified for thin premixed carpet (30mm thick) filled up to the top level of existing road , well rammed (including supply of materials) and compacted with hand roller , depth of pot holes not exc 40 mm (averaging 30mm thick). Note:- Pot holes shall be marked by Engineer-in-Charge before commencement of work and the same shall be entered in MB after making good and before laying of cold road patch carpet. |
| 2 | M & L preparing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with broomny bags to remove all loose dirt etc and applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate o application of 0.3-0.35 kg/sqm on bituminous surface pavement as specified in Table 500-5 of MoRTH specification for road and bridge works 2013,using mechanical sprayer complete all as specified and directed. |
| 3 | Material & Labour for premix bituminous macadam using 4 % binder (paving bitumen VG 30 Grade) by weight of total mix laid manually or with mechanical pavers (consolidated thickness 75mm or less), rolled and compacted to gradient and camber required with 8 to 10 tonne power road roller all as specified and directed by Eingneer-in-Charge. (Tack coat as applicable shall be measured and paid under Serial item 4 here-in-before including preparation and cleaning of surfaces.) |
| 4 | M&L for Bituminous premixed semi-dense asphaltic concrete 30 mm consolidated thckness with 5.5% binder content (paving bitumen VG 30 Grade) by weight of total mix, mixed in central computrized hot mix plant and laid using mechanical self propelled paver and rolled with 8 to 12 tonne vibromax power roller to required camber and gradient all as specified and directed by the Engineer-in-Charge. |
| 5 | M & L for preparing bituminous surfaces of road and marking 2.00 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 6 | Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 7 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 8 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 9 | Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing rubbish from site upto 100 m distance complete all as specifeid and directed |
| 10 | M & L, hard core of for broken stone boulder of gage n.exc 63mm deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces. |
| 11 | M & L, for 75 mm Cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) complete all as specified and as directed. |
| 12 | M and L providing and laying 80mm thick (ISI Marked) factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 13 | M and L providing and laying 60mm thick (ISI Marked) factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 14 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 15 | M/L for two coat of synthetic enamel paint over a coat of primer on new concrete surface including preparation of surface complete all as specified and directed by Engr -in-charge |
| 16 | M/L for two coat of synthetic enamel paint on old concrete surface including preparation of surface complete all as specified and directed by Engr -in-charge |
| 17 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in mortar including removing of demolished material complete all as specified and as directed. |
| 18 | M&L for chequered cement concrete coloured tiles 250mm x 250mm/ 300mm x 300mm 20 to 22mm thick of approved colour, set jointed and pointed in cement slurry in floors with grey cement and pigments laid over and including 20mm thick screed bed or bedding layer in CM 1:4 complete all as directed. Please Enable Macros to View BoQ information |
