|
| 1 | SITE CLEARANCE: |
| 2 | Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil . |
| 3 | EARTH WORK: |
| 4 | Earth work in excavation by mechanical means (Hydraulic wxcavator) manual ,eans in foundation trenches ordrains including dressing of sides and ramming ofbottoms, lift uoto 1.5m including getting out the exavated soil anddisposal of surplus excavated soil as directed within a lead of 50m. |
| 5 | ANTITERMITE TREATMENT: |
| 6 | Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/Lindane emulsifiable concentrate of 20%. |
| 7 | BACK FILLING OF EARTH: |
| 8 | Filling available excavated earth in trenches plinth sides of foundation etc.in layer not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 9 | Filling with available fly ash and earth in trenches bor embankment in layer with intermediate layer of compacted earth after every four layers of compacted depth of fly ash sides & top layer of filling shall be dine with earth having total minimum compacted thickness 30 cm or as decided by Engineer –in- charge including compacting each layer by rolling ramming and watering all complete as per drawing and direction of Enginner-in-charge. |
| 10 | Supply & Filling in plinth with sand under floors including watering Ramming consolidating and dressing complete. |
| 11 | PLAIN CEMENT CONCRETE |
| 12 | Providing and laying in position cement concrete 1:4:8 aggregated excluding the cost of centering and shuttering-all work upto plinth level. |
| 13 | R.C.C WORK |
| 14 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring shuttering finishing and reinforced-All work upto plinth level 1:1.5:3 all works upto plinth level. . |
| 15 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring shuttering finishing and reinforced-All work upto plinth level 1:1.5:3 All works above plinth level upto floor V level. |
| 16 | PLINTH PROTECTION |
| 17 | Making plinth protection 50mm thick of cement concrete 1:3:6 over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth. |
| 18 | SHUTTERING & CENTERING |
| 19 | Centering shuttering including strutting propping etc. and removal of from work foundations ,footing ,bases of column etc. for mass concrete. |
| 20 | Centering shuttering including strutting propping etc. and removal of from work Columns ,Pillars,Piers, Abutments, Posts and Struts. |
| 21 | Centering shuttering including strutting propping etc. and removal of from work Suspended floors ,roofs,landings, balconies and access platform. |
| 22 | Centering shuttering including strutting propping etc. and removal of from work Lintels, beams ,plinth beams,girders, bressumers and cantilevers. |
| 23 | REINFORCEMENT OF STEEL |
| 24 | Reinforcement for R.C.C work including straighting cutting,bending,placing in position and bending all complete Themro-Mechanically Treated bars. |
| 25 | BRICK WORK |
| 26 | 230th Brick work with comman burnt clay F.P.S (non modular) brick of class designation 75 in foundation & plinth in cement mortar 1:6 |
| 27 | Brick work with F.P.S bricks of class 75 in super structure above plinth level up to floor five level in all shapes and sizes in cement mortar 1:6 |
| 28 | Half brick masonry with F.P.S bricks of class designation 75 in super structure above plinth level up to floor five level in cement mortar 1:4 |
| 29 | DOOR, WINDOW, VENTILATOR |
| 30 | Providing and fixing Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (65 mm & above) x (40 mm & above) & glazed sash (25 mm & above) x (50 mm & above) & fly screen sash (18 mm & above)x (40 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). |
| 31 | Providing and fixing Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with SS 304 body. Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (7 4 mm & above). (Height upto 2.5 metre). |
| 32 | Providing and fixing Fixed window I ventilator with mullion I transom. Using R1 series with frame (33 mm & above ) x (35 mm & above) & mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre) |
| 33 | Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length |
| 34 | RAILING WORK |
| 35 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 36 | Providing and fixing hand rail of approved size by welding etc. to stee ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube |
| 37 | SPIRAL STAIRCASE (M.S) |
| 38 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 39 | Providing and fixing hand rail of approved size by welding etc. to stee ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube |
| 40 | PLASTER & FINISHING WORK |
| 41 | 12mm thick plaster on the plain in side of mix 1:6 mortar. |
| 42 | 15mm cement plaster on the rough side of single or half brick wall of mix. |
| 43 | 6mm thick cement plaster of ceiling of mix 1:6 mortar. (DSR 2023 -13.16.1) |
| 44 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work over and including water thinnable priming coat with cement prime. |
| 45 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall surface to prepare the surface even and smooth complete. |
| 46 | Finishing walls with Acrylic smooth exterior paint of required shade new work |
| 47 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: two or nore coats on new work over an under coat of suitable shade with oridinary paint of approved brand and manufacture. |
| 48 | FLOORING WORK |
| 49 | Providing and laying verified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 ,jointing with grey cement slurry @3.3kg/sq.m including groutibg the joints with white cement and matching pigments etc. complete size of tile 600 x 600 mm. |
| 50 | Providing and fixing 1st qaulity ceramic glazes floor tiles conforming to IS:15622 of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer-in-charge in skirting,risers of steps and dados over 12mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 51 | Providing and fixing 1st qaulity ceramic glazes wall tiles conforming to IS:15622 of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer-in-charge in skirting,risers of steps and dados over 12mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 52 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling I grouting and finishing complete as per direction of Engineer-in-charge. . |
| 53 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 54 | FALSE CEILING |
| 55 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side nclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 Ox0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre. |
| 56 | WATER & DAMP PROOFING |
| 57 | Providing and Laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying. ( |
| 58 | DRAINAGE & WATER SUPPLY WORKS |
| 59 | Providing , laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 including testing of joints etc. 150 mm diameter |
| 60 | Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I grating Brick Masonry chamber with wter tight C.I cover with frame of 300x300mm size the weight of cover to be not less than 4.50kg and frame to be not less than 2.70kg. as per standard design. |
| 61 | Providing and laying cement concrete 1:5:10 all round S.W pips including bed concrete as per standard design. 15mm dia S.W PIPE. |
| 62 | Constructing brick masonry chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4. 455x610 mm iternal dimensions total weight of cover with frame to be not less than 38kg R.C.C top slab with 1:1.5:3 mix |
| 63 | Providing and fixing G.I pipes complete with G.I fittings and clsmps including cutting and making good the walss etc. internal work exposed on wall. |
| 64 | 15mm dia nominal bore |
| 65 | 25mm dia. nominal bore |
| 66 | 50mm dia. nominal bore |
| 67 | Providing and fixing ball valve of approved quality complete high or low pressure with plastic floats 25mm dia. Nominal bore |
| 68 | Providing and fixing gun metal non-return valve of approved quality :25mm nominal bore. |
| 69 | Providing and fixing gun metal non-return valve of approved quality :50mm nominal bore. |
| 70 | Providing and fixing uplasticised PVC connection pipe with brass unions 15mm nominal bore. |
| 71 | Providing and placing on terrace polyethylene water storage tank ISI:12701 marked with cover and suitble locking arrangement and amking necessary holkes for intel outlet and overflow pipes but without fittings and the base vsupport for tank. |
| 72 | Providing and fixing soil,waste and vent pipes:sand cast iron S&S pipe as per IS:1729 100mm |
| 73 | Providing and fixing soil,waste and vent pipes:sand cast iron S&S pipe as per IS:1729 75mm |
| 74 | Providing and fixing plain bend of required degree.100mm sand cast iron S &S as per IS:1729 |
| 75 | Providing and fixing single equalplain invert branch of required degree.100x100x100mm sand cast iron S &S as per IS:1729 |
| 76 | Providing and fixing single equalplain invert branch of required degree.75x75x75mm sand cast iron S &S as per IS:1729 |
| 77 | Providing and fixing mirror of superior glass and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing :Rectangular shape 453x357mm. |
| 78 | Providing and fixing terminal guard: sand cast iron S&S pipe as perIS-1729 |
| 79 | Providing and fixing M.S stays and clamps for sand iron/centrifugally cast iron pipes of diameter:10mm dia. |
| 80 | Providing and fixing C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore. |
| 81 | Providing and fixing C.P brass stop cock of standard design and of approved make conforming to IS:8931. 15mm nominal bore. |
| 82 | Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore. |
| 83 | Providing and fixing 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 84 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 85 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 86 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
| 87 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm height of 75mm with concealed fitting arrangments weighing not less than 106 gms. |
| 88 | SANITARY WORKS |
| 89 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required :Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern |
| 90 | Providing and fixing white vitrepous china flat back or wall corner type lipped from urinal basin of 430x260xx350mm and 340x410x265mm size respectively with automatic flushing cistern with standard flush pipe abd C.P brass spreaders with brass unions and G.I clamps complete,including painting of fitting and brackets cutting and making good the walls and floors wherver required :one urinal basin with 5 ltr. white P.V.C automatic flushing cistern |
| 91 | Providing and fixing soil ,waste and vent pipes sand cast iron S&S pipe as per IS:1729 |
| 92 | 100mm dia. |
| 93 | 75mm dia. |
| 94 | Providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete,including cost of cutting and making good the walls and floors: sand cast iron S&S as per IS-17 |
| 95 | Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps,32mm C.P brass waste of standard pattern,including painting of fitting and brackets,cutting and making good White viterous china wash basin size 630x450mm with single 15mm C.P brass pillar tap |
| 96 | Providing and fixing C.P. brass shower rose with 15 or 20 mminlet: 100mm diameter. |
| 97 | ELECTRICAL WORK |
| 98 | Wiring for light Point/fan point ,exhaust fan point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface steel conduit with modular switch,modular plate suitable G.I box for earhting the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable ISI marked 1100 volts grade as required for group C point including ceiling rose and lamps holder as required |
| 99 | Supplying and fixing 5/6 amps.modular type switch on the existing modular plate & switch box including cconnections but excluding modular plate,AC etc. as required. |
| 100 | S/F 1 or 2 module GI box of size 75x75 mm along with modular base and cover plate for modular switches in recess etc as required. |
| 101 | S/F 3 module GI box of size 100x75 mm along with modular base and cover plate for modular switches in recess etc as required. |
| 102 | S/F 6 module GI box of size 200x75 mm along with modular base and cover plate for modular switches in recess etc as required. |
| 103 | S/F 8 module GI box of size 125x125 mm along with modular base and cover plate for modular switches in recess etc as required. |
| 104 | S/F 12 module GI box of size 200x150 mm along with modular base and cover plate for modular switches in recess etc as required. |
| 105 | Supplying and fixing Following Piano type 3pin 5/6A socket outlet. |
| 106 | Supplying and fixing 3 Pin 5 amps ceiling rose on the existing junction box/wooden block including connections etc as required. |
| 107 | Supplying and fixing suitable size G.I box with modular plate and cover in front on surface including P/F 3 pin 5\6 amps modular socket outlet and 5/6 amps modular switch connections etc. as required. |
| 108 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 109 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required. |
| 110 | Supplying and fixing suitable size G.I box with modular plate and cover in front on surface including P/F 6 pin 15/16 amps and 5/6 amps modular socket outlet and 15/16 amps modular switch connections etc as required. |
| 111 | Supplying and fixing 6 way double door surface mounting vertical type 240 volts TPN MCB distribution board of sheet steel dust protected duly powder painted,including of 63 amps tinned copper bus bars,common neutral link,earth bar,din bar for mounting MCBs of HAVELLS make model LOAD LINE or its equivalent of legrand/ABB/L&T/scienmense make inclduing painting earhting etc. as required. |
| 112 | Supplying and fixing Single pole 5amps-32 amps rating 240/415 Volts C series miniature circuit Breaker suitable for including loand of following pole in the existing MCB DB complete with connections,testing and commisioning etc as required. |
| 113 | Supplying and fixing of 200mm sweep double ball bearing type exhaust fan of make USHA/CROMPTON/PHLLIPS/or its equivalent in all respect as required and directed by Enginner-in-charge. |
| 114 | LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) Supplying, installation, Testing & Commissioning of LED Recessed/ surface down light. |
| 115 | 30 watt |
| 116 | 12 -15 watt |
| 117 | LED Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 |
| 118 | 18- 22 watt |
| 119 | Providing and fixing 32 amps single pole MCB in existing cubical panel board including drilling holes in cubical panel making connection etc. includingtesting and commissioning etc as required. |
| 120 | Wiring for circuit/sub-main wiring along with earthwire the following size of FRLS PVC insulated copper conductor single core cable I.S.I marked 1100 Volts grade in Surface/recessed steel conduitas required. |
| 121 | 2 x1.5 sqmm+1x1.5 sqmm earth wire |
| 122 | 2 x2.5 sqmm+1x2.5 sqmm earth wire |
| 123 | 2 x 4 sqmm+1x4 sqmm earth wire |
| 124 | 2 x 6 sqmm+1x6sqmm earth wire |
| 125 | Supply , installation,testing and commissiong of 1200 mm sweep, BEE 5 star rated,ceiling fan. |
| 126 | WATER COOLER |
| 127 | CEILING FAN |
| 128 | WALL HANGING FAN |
| 129 | INTERIOR WORK |
| 130 | FURNITURE WORK |
| 131 | MID BACK MESH REVOLVING CHAIR BLACK |
| 132 | HIGH BACK REVOLVING CHAIRBLACK/BLUE |
| 133 | WORKSTATION 8 SEATER(8 SEATER TABLE) SIZE: 96\\"X36\\"X30\\" |
| 134 | BOOKCASE STEEL (4 SHELF GLASS) SIZE: 72\\"X30\\"X18\\" |
| 135 | WORKSTATION 8 SEATER(8 SEATER TABLE) SIZE: 12'X2'X2' |
| 136 | DIRECTIOR TABLE SIZE: 72\\"X36\\"X30\\" |
| 137 | 5 SEATER SOFA WITH TABLE |
| 138 | AIR CONDITIONER |
| 139 | 2 TON 5 STAR VOLTAS |
| 140 | 1 TON 5 STAR |
| 141 | A/C INSTALLING CHARGE |
| 142 | WALL STAND |
| 143 | COMPUTER |
| 144 | HP A/O DESKTOP 27-CR0902IN I3-13T 8GB/512GB/WIN/MSO |
| 145 | HP A/O DESKTOP 24-CR0902IN I3-13T 8GB/512GB/WIN/MS |
| 146 | HP PRINTER SMART TANK580AIO P/S/C/W |
| 147 | CCTV CAMERA |
| 148 | DVR CP PLUS 8CH |
| 149 | SMPS 10A |
| 150 | BULLET CAMERA 2.4MP(GUARD+MIC) |
| 151 | DOME CAMERA 2.4MP(GUARD+MIC) |
| 152 | HDD 2TB |
| 153 | PVC BOX |
| 154 | BNC CONNECTOR SET |
| 155 | RACK 2U |
| 156 | INSTALLATION CHARGE |
| 157 | 3+1 CABLE |
| 158 | 1.5 MTR. HDMI CABLE |
| 159 | 32 INCH LED SMART TV Please Enable Macros to View BoQ information |
