|
| 1 | Excavation for StructuresEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material |
| 2 | Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203Nominal mix 1:3.6 (Hand mixing) |
| 3 | Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.M-25 |
| 4 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 120 |
| 5 | Supplying, fitting and placing HYSD barre in reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 |
| 6 | Reflective Kerb PaintingKerb stone /vertical surface painting with water based acrylic paint,preferably mechnical application for one coat priming coat and 1 uniform Retro reflective finish coat in required colour. Yellow Retroreflecive coat shall be Bright Yellow during night with minimum Rl(dry) > 375 mcd / m2 / lux and Rl (wet) > 200 mcd / m2 /lux andWhite Retroreflective Coat shall be Bright White during night with minium Rl(dry) > 450 mcd / m2 / lux and Rl(wet) > 250 mcd / m2 / lux .Cleaning of the surface thoroughly by removing flakes,dust deposits, vegetation growth,pasted paper etc., using coir / coil brush, so as to enable the application of respective primer etc. |
| 7 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer on stuctral steel MS tube. |
| 8 | Providing steel R.S.Js/built-up steel sections including cutting, welding/rivetting, hoisting, fixing in position for composite girders with shear connectors complete with painting as per drawing and technical specifications Clause 1205. For structral steel. |
| 9 | Painting on Concrete/Steel Surfaces with EpoxyPainting two coats including primecoat with poxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 170 |
| 10 | Design, manufacturing, supply and installation of retro reflective sign boards of cautionary, mandatory and informatory types using micro prismatic Type XI reflective sheeting conforming to ASTM D4956, duly pasted on Aluminium Composite Panel (ACP/ACM) of minimum 4 mm thickness.The sign face shall be developed using digitally printed graphics, incorporating city-specific themes, logos, wayfinding information, and public utility/social awareness messages, ensuring uniformity and enhanced visual appeal. The entire printed surface shall be protected with a UV-resistant, transparent overlaminate film, ensuring long-term colour retention, resistance to fading, abrasion, dust, moisture, and harsh climatic conditions. The complete signage facia shall conform to the provisions of IRC 67:2022 and shall carry a minimum 10-year warranty (must follow clause 6.7.4.3, 6.7.5, 6.8 & 6.9 of IRC 67 -2022) |
| 11 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 12 | Providing Crane 10 tonne capacity |
| 13 | Providing Crane 15 tonne capacity |
| 14 | Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of using micro prismatic Type XI reflective sheeting conforming to ASTM D4956, duly pasted on Aluminium Composite Panel (ACP/ACM) of minimum 4 mm thickness.The sign face shall be developed using digitally printed graphics, incorporating city-specific themes, logos, wayfinding information, and public utility/social awareness messages, ensuring uniformity and enhanced visual appeal. The entire printed surface shall be protected with a UV-resistant, transparent overlaminate film, ensuring long-term colour retention, resistance to fading, abrasion, dust, moisture, and harsh climatic conditions. The complete signage facia shall conform to the provisions of IRC 67:2022 and shall carry a minimum 10-year warranty (must follow clause 6.7.4.3, 6.7.5, 6.8 & 6.9 of IRC 67 -2022)with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB, 3.2 mm thickness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. |
| 15 | Dismantling of existing broken down structure and poles of existing cautionary / mandatory / informatory / overhead sign board using complete Tools and Machinery and dismantling of sign plate of existing unserviceable material using proper machines, tools etc, in such a manner that new sign board can be installed.\\"The scrap value of old materials shall be credited in the contractor’s bill at the prevailing current rates.” Please Enable Macros to View BoQ information |
