|
| 1 | Servicing of DEA sets of following capacity by replacing the old oil filters, lub oil, flushing testing and commissioning on load by doing following works etc. complete as reqd. |
| 2 | 15 KVA |
| 3 | 20 KVA |
| 4 | 30 KVA |
| 5 | 40 KVA |
| 6 | 50 KVA |
| 7 | 62.5 KVA |
| 8 | 82.5 KVA |
| 9 | 100/110 KVA |
| 10 | Replacement of choked/damaged Air Filter Element set (Inner & Outer) of the following capacity DG sets i/c testing, commissioning etc. complete as reqd. |
| 11 | 15/20/30 KVA DG sets |
| 12 | 40/50/62.5/82.5KVA DG Set |
| 13 | Replacement of existing faulty batteries for the Diesel Engine Alternator sets i/c disconnection of faulty battery and Supply and fixing of following capacity batteries along with battery terminals and leads to the sites directed by the Engineer in charge i/c testing commissioning etc. complete as reqd. - Batteries with Minimum 24 Months Warranty) Note: - The old DG battery shall be retained by the agency and rates may be quoted accordingly. |
| 14 | 12V, 100AH (Make: Exide Drive) |
| 15 | 12V, 130AH (Make: Exide Drive) |
| 16 | Supply and fixing of following capacity batteries for the Diesel Engine Alternator sets along with battery terminals and leads to the sites directed by the Engineer in charge i/c testing commissioning etc. complete as reqd. - Batteries with Minimum 24 Months Warranty) [Theft Cases] |
| 17 | 100AH (Make: Exide Drive) |
| 18 | Repairing of DG sets by carrying the suitable spare parts i/c the dismantling the faulty part & installation of new/repaired parts, commissioning, testing complete as reqd. (15/30KVA DGs). |
| 19 | PVC Wire Braided Fuel pipe (Main) |
| 20 | PVC Wire Braided Fuel pipe (Return) |
| 21 | V-Belt |
| 22 | Repairing & servicing of DG Self-starter Motor |
| 23 | Replacement of Static/ SMPS Battery Charger (12 Volt / 10 Amp) [Mahamaya/ SS make] |
| 24 | Repairing & servicing of Radiator |
| 25 | Alternator’s AVR |
| 26 | Hours Meter-230V AC |
| 27 | Diode [Set of 06 Nos] |
| 28 | Rectifier |
| 29 | Door hinges of canopy |
| 30 | Repairing & Calibration of fuel injector from the authorized work shop i/c replacement of minor components, getting the job done, re installation testing commissioning etc. complete as required. |
| 31 | Replacement of following defective/ burnt/ unrepairable/ obsolete items of AMF Control Panel of DEA set i/c dismantling the defective ones, refixing the new items, making connections testing/commissioning etc. as required at site. |
| 32 | Contactor 63Amp 4Pole AC-1 (L&T/TC/SS Make) |
| 33 | MCB 63Amp 4Pole (L&T/Siemens/Schneider/SS make) |
| 34 | Contactor Coil 40Amp -(Schnieder/TC/L&T /SS make) |
| 35 | Contactor Coil 63Amp (Schnieder/TC/L&T /SS make) |
| 36 | GCU (Make-Deepsea/Deif/Procom) |
| 37 | 3Way 4Pole 63Amp Changeover Selector Switch (vaishno/Kay Cee/ SS make) |
| 38 | Start/Stop Relay Card compatible with GCU at site) |
| 39 | DC Relay 40Amp-5Pin (OVN/SS make) |
| 40 | Start/Stop Push Button - (vaisno/Salzer make) |
| 41 | 12Volt Stop Solenoid Switch- (autolek/SS make) |
| 42 | DC Wiring 1.5mm i/c Ferrules/Lugs etc. supplying/making connections as reqd. |
| 43 | DC Wiring 2.5mm i/c Ferrules/Lugs etc. Supplying/making connections as reqd. |
| 44 | AC Power Wiring 10mm Ferrules/ Lugs etc. supplying/ making connections as reqd. |
| 45 | Battery leads (Copper) |
| 46 | Dismantling of 15/30/40/62.5 KVA make DEA set in silent canopy installed at BSNL BTS / Exchange by opening the DEA set mains cable, charging cable, earth connection, silencer etc. and keeping the set aside ready for transportation etc. as required. |
| 47 | Lifting of disentailed 15/30/50 KVA DEA set with due care with the help of Hydra/crane and placing on the truck/tempo, hired for transportation. |
| 48 | Charges for Transporting the DEA set from one BSNL site to other BSNL site as directed by the engineer in charge with the help of Truck/Tempo with due care etc. complete as req. |
| 49 | 05 to 25 km |
| 50 | 26 km to 50 Km |
| 51 | 51 Km to 100 Km |
| 52 | Unloading of transported 15/30/50 KVA DEA set on the foundation at BSNL BTS/Exchange with due care from tempo by means of crane/Hydra and placing at the suitable place as directed by the engineer in charge. |
| 53 | ITC of shifted 15/30/50 KVA DEA set by making power connections, control connection, earth connections, testing the set on load etc. complete as required. |
| 54 | Dismantling the existing faulty burnt 15/30 KVA alternator from DG set i/c to and & fro transportation charges from BTS site/TE Exchange to workshop and bringing back at sites etc. complete with chain/pulley /labour charges etc. as required |
| 55 | Rewinding of rotor winding for 15 KVA alternator I/c dismantling the burnt wires, rewinding with super enameled copper wires of suitable gauge, varnishing i/c testing etc.as required |
| 56 | Rewinding of stator winding for 15/30 KVA alternator I/c dismantling the burnt wires, rewinding with super enameled copper wire of Suitable gauge, varnishing i/c testing etc. as required |
| 57 | ITC of 15/ 30 KVA alternator after repairing i/c coupling of engine and alternator making connections etc. testing the DEA set on load at respective sites as required |
| 58 | Checking, tracing out and removing the DG’s faults in TE/BTS as per following distances from district Main Exchange i/c tracing the fault in Engine/alternator/panel/wiring etc. and restoring the Electrical mains/DG Supply as per site requirements. |
| 59 | within (0- 10 KM) |
| 60 | within 25 KM |
| 61 | Between 25KM to 50 KM |
| 62 | Less for dismantled material Please Enable Macros to View BoQ information |
