|
| 1 | Development work of Belur Chandmari trenching ground with new installation of 3 Nos of 150 X 100 mm Dia Tube well for fire fighting with supplying of requisite materials , Belur , under Bally Municipality. |
| 2 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. [Ref. S&P SOR-1.11.2017, Pg-49,Itm- 1 d ](d) For Depth upto 150 metre for 50mm dia. tube wellwith top enlargement of 100 mm dia.i) 100 mm dia. boring etc. |
| 3 | ii) 150 mm dia. boring etc. top enlargement |
| 4 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conformingto ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239(Part - I).[Ref. S&P SOR-1.11.2017, Pg-13,Itm- 19(III)(A) ]100 mm |
| 5 | 150 mm |
| 6 | Supplying high density polythene strainer of approved make withadapter conforming to I.S. specifications. [Ref. S&P SOR-1.11.2017, Pg-52,Itm- 5 ( iv) ]i) 100 mm dia |
| 7 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conformingto ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239(Part - I).[Ref. S&P SOR-1.11.2017, Pg-13,Itm- 19(III)(A)] 65 mm Dia |
| 8 | Supply of G.I. pipes of TATA make of different dia including necessary socketsi) 150 mm dia (Heavy quality)[PWD P & S, Page-2, item no.1 (A)(k)(ii) ] |
| 9 | Supply of P.V.C. nipple 300 mm. long & 150 mm. dia [PWD P & S, Page-18, item no.19(III)(F)(v)] (i) 80 mm dia. |
| 10 | Supply of G.I. reducing socket with I.S.I. mark150 X 100, dia [P.W.D. P & S, Page-18, Item no.19(III)(L) ] |
| 11 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.[Ref. S&P SOR-1.11.2017, Pg-53,Itm- 9(iii) ](i) 80 mm dia. |
| 12 | Supplying,fitting and fixing G.I.cap at top. 150 mm dia [P.W.D. P & S, Page-54, Item no.18(ii) ](ii) 150 mm dia. |
| 13 | Supplying, fitting and fixing heavy type bell mouth reducing socket[Ref. S&P SOR-1.11.2017, Pg-54,Itm- 17 ]100 X 150 mm dia |
| 14 | Supplying, fitting and fixing check valve (Horigontal) G.M. tested to 21 kg per sq. cm.[Ref. S&P SOR-1.11.2017, Pg-53,Itm- 9 ](v) 50 mm dia. |
| 15 | Supplying, fitting and fixing centre guide [Ref. S&P SOR-1.11.2017, Pg-56,Itm- 28 i ] |
| 16 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessaryarrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffoldingas required.[Ref. S&P SOR-1.11.2017, Pg-55,Itm- 20 ] |
| 17 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved qualityhaving size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.cu. m. 2029.00 Note: Initial 6 m. of Annular space between the housing pipe and the bore should not be shrouded with Pea size gravel to avoid contamination with surface water. [Ref. S&P SOR-1.11.2017, Pg-55,Itm- 24 ] |
| 18 | Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer -in-charge with cost of all materials and labour complete.[Ref. S&P SOR-1.11.2017, Pg-56,Itm- 25 ] |
| 19 | Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete.[Ref. S&P SOR-1.11.2017, Pg-55,Itm- 22 ] |
| 20 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). [Ref. S&P SOR-1.11.2017, Pg-5, Itm- 5 (i) ]100 mm Dia |
| 21 | Supplying,fitting,fixing of 5 HP submerssible pump with 3 phase panel 415 Volt all complete.65mm |
| 22 | Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc. including cost of all materials, jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials withbituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment forpainting will be made seperately)- 100 mm dia [Ref. S&P SOR-1.11.2017, Pg-3, Itm- 2 (ix) ] |
| 23 | Add GST @18% |
| 24 | Add CESS @ 1% Please Enable Macros to View BoQ information |
