|
| 1 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(A) For Exposed Work(a) (i) 15 mm dia. light quality |
| 2 | (c) (i) 25 mm dia. light quality |
| 3 | (e)(ii) 40 mm dia. medium quality |
| 4 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).(vii) 25 mm dia |
| 5 | (v) 40 mm dia |
| 6 | Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 7 | (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 8 | Supplying, fitting and fixing shower of approved brand and make.(f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). |
| 9 | Supplying, fitting and fixing pillar cock of approved make.c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent). |
| 10 | (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm |
| 11 | d) Polythene Piller Cock (EMCO / ATLAS or equivalent)(i) 15 mm |
| 12 | Supplying, fitting and fixing 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510, 510(A) and Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand). |
| 13 | Labour for dismantling G.I. pipe with fittings.(i) 15 mm |
| 14 | (iii) 25 mm |
| 15 | (v) 40 mm |
| 16 | Refixing G.I. pipe with fittings after cleaning where necessary.(i) 15 mm |
| 17 | (iii) 25 mm |
| 18 | (v) 40 mm |
| 19 | Removing chokage in G.I. pipe including cleaning pipe.(i) 15 mm |
| 20 | (iii) 25 mm |
| 21 | (v) 40 mm |
| 22 | Rewashering stop cock/ bib cock/ push cock/ pillar cock including gland(i) 15 mm |
| 23 | Renewing brass spindle and valve of stop cock/bib cock/push cock/pillar(i) 15 mm |
| 24 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 25 | Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayer(b) 1000 litre capacity |
| 26 | Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.(a) Upto 1st story from G.L. |
| 27 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 28 | Cleaning and disinfecting upto 2000 litre Water Tank including masonry reservoir.For three times |
| 29 | Cleaning and disinfecting above 2000 litre Water Tank including masonry reservoir.For three times |
| 30 | Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.(ii) 550 mm X 400 mm size |
| 31 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(ii) 450 mm long |
| 32 | (iii) 600 mm long |
| 33 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(i) 600 mm long |
| 34 | (ii) 750 mm long |
| 35 | Supplying, fitting & fixing Aluminium domical grating.(i) 150 mm |
| 36 | Dismantling H.C.I. pipe with fittings including melting lead caulked joints.(iii) 100 mm |
| 37 | Refixing H.C.I. pipe with fittings including lead caulked joints (with the old molten lead).(iii) 100 mm |
| 38 | Renewing cast iron inspection door with bolts and nuts complete for fittings of 50 mm dia. to 150 mm dia. H.C.I. pipe. |
| 39 | Removing chokage of H.C.I. or S.W. pipe with split bamboo.(a) Underground |
| 40 | (b) Over ground |
| 41 | Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/ 2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately).(a) With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth.(ii) 100 mm dia. (internal) |
| 42 | Supplying, fitting & fixing H.C.I. bend with door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).(a) With valamoid joints including sealing the top with cement mortar (4:1)(ii) 100 mm dia. |
| 43 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.(a) Sink only(i) 530 mm X 430 mm x 180 mm |
| 44 | (b) Sink with drain board 1050 mm X 450 mm X 180 mm |
| 45 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(ii) 470 mm X 280 mm X 340 mm |
| 46 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(ii) 600 mm X 450 mm |
| 47 | Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing).(i) 580 mm long |
| 48 | Cleaning I.P.W.C. with acid. |
| 49 | Cleaning E.P. or Anglo-Indian W.C. with acid. |
| 50 | Cleaning urinal with channel with acid. |
| 51 | Dismantling & Refixing pit cover |
| 52 | Cleaning silt of inspection pit. |
| 53 | Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc.etc.from road side masonary drain/ hume pipe drain/ culvert etc. by mathor labour after removing concrete.Slab/manhole cover etc.without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc.etc.by using iron pans,buckets including all labour, tools & plants including removing the spoils in dry condition and disposing the same by truck beyond the road side in conformity with municipal/corporation rules for such disposal including loading into truck and cleaning the road side in all respects as per direction of the Engineer- in-Charge. |
| 54 | Supply of G.I. nipple standard 50 mm long.(iii) 25 mm |
| 55 | Supply of long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut.(iii) 25 mm |
| 56 | Labour for fitting and fixing G.I. specials including cost of jointing materials.(b) Socket, Reducing socket, Bend, Plain equal elbow, Reducing elbow, Nipple, Short piece(i) Upto 25 mm dia. |
| 57 | (d) Cross, Union, Long screw.(i) Upto 25 mm dia. |
| 58 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed WorkPVC Pipes(Dia)15 mm |
| 59 | 25 mm |
| 60 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Length(a) 75 mm |
| 61 | (B) Fittings(iii) Door Tee(a) 75 mm |
| 62 | x) Bend 87.5º(a) 75 mm |
| 63 | (A) (i) Single Socketed 3 Meter Length(b) 110 mm |
| 64 | (B) Fittings(iii) Door Tee(b) 110 mm |
| 65 | x) Bend 87.5º(b) 110 mm |
| 66 | xv) Vent Cowl(b) 110 mm |
| 67 | Renewing high pressure polythene ball cock of approved quality with polythene ball and aluminium lever complete for pipe of dia.:(iv) 15 mm |
| 68 | (ii) 25 mm |
| 69 | Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) (a) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 70 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).(i) 450 mm X 350 mm |
| 71 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C.(ii) Plastic (hallow type) white |
| 72 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).(iv) 50 mm dia |
| 73 | (v) 40 mm dia |
| 74 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. |
| 75 | CESS Please Enable Macros to View BoQ information |
