|
| 1 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. [D-6/7] |
| 2 | a) 40Amp,4 pole [Make: Legrand/Siemens/L&T/ABB (E)] [D-6/7] |
| 3 | Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment [D-9/11] |
| 4 | a) 4 way [D-9/11] |
| 5 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. |
| 6 | a) 2+12 way Enclosure [Make: Legrand/Siemens/L&T/ABB] [D-9/13] |
| 7 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. [D-5/6] |
| 8 | a) 40 Amp DP Isolator [Make: Legrand/Siemens/L&T/ABB (E)] |
| 9 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [D-6/7] |
| 10 | (a) 6-32 Amps SP MCB [Make: Legrand/Siemens/L&T/ABB (E)] |
| 11 | Supplying & Fixing Industrial Plug & Socket board with 240 V, 32A, SPN & Earth Metal Industrial Plug socket & 32A Industrial top incl. S&F 32 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and ncecessary conection.[ Make L& K, ABB (E)/Legrand/Siemens ] |
| 12 | SITC of 10 KVA Servo Voltage Stabilizer at Sisir Mancha. Model No - SVC10000,Make -Studiomaster/ Ahuja/ Power Gate with minimum technical specification: (i)Input Voltage- 160-250 VAC,(ii) Output Voltage 230 VAC, High voltage protection value: 290 ± 5 V (iii) supply frequency: 50-60 Hz,(iv) Buzzer/Neon to indicate over-voltage & under-voltage limit of input voltage, (v) over-load protechtion.(vi) Low voltage protection value: 120V ± 10V (vii) Accuracy of voltage stabilization ± 4% V, (ix) waveform distortion : No additional wave form distortion, (x) Load pf=0.8 (xi) Efficiency ≤90%, (xii) Adjustable time :< 1s (when input voltage has a change of 10%) (xiii) Delay time: Longtime delay: 5± 2s, (xiv) Electrical strength: No flashover or breakdown when it withstands 1500 V/min, (xv) Insulation resistance: < 2M ohm. |
| 13 | Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Make:- Anchor) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-7/26] |
| 14 | Supply & Fixing 240 V 6 A Piano key type switch (Make:- Anchor) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-5/14a] |
| 15 | Supply & Fixing 240 V 16/20 A Piano key type switch (Make:- Anchor) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-5/14b] |
| 16 | Supply & Fixing 240 V, 6A plug socket (Make:- Anchor), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.[E-5/15a] |
| 17 | Supply & Fixing 240 V, 20 A plug socket (Make:- Anchor), without plug top and switch, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.[E-5/15b] |
| 18 | Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: Polycab/Gloster/Finolex/RR Kabel) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] |
| 19 | a) On Board [E-12/6(a)] |
| 20 | b) Avg. Run-7.5mtr [E-12/6(f)] |
| 21 | Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works |
| 22 | a) 415 mm x 240 mm x 65 mm [E-3/10] |
| 23 | Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: Polycab/Gloster/Finolex/KEI/Havells/RR Kabel) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required [E-14/1(a)] |
| 24 | a) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14,a(ii)] |
| 25 | b) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) as ECC [E-14,a(iv)] |
| 26 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make: Polycab/Gloster/Finolex/RR Kabel) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required |
| 27 | a) 2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC [E-9/1(b1)] |
| 28 | Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works |
| 29 | a) 25mm size [E-16/7(a)] |
| 30 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F-5/9] |
| 31 | a) 2.5sqmm [F-5/9(i)] |
| 32 | b) 4 sqmm [F-5/9(ii)] |
| 33 | c) 6 sqmm [F-5/9(iii)] |
| 34 | d)10 sqmm [F-5/9(iv)] |
| 35 | Supply of 4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make: Polycab/Gloster/Finolex/RR Kabel] |
| 36 | a) 4 Core 25 Sqmm |
| 37 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [F-1/2(b)] |
| 38 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :[F-4/7] |
| 39 | a) 4 Core 25 Sq. mm [F-4/7(c)] |
| 40 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials [F-5/8(b)] |
| 41 | a) 4 Core 25 Sq. mm [F-5/8(b)(xv)] |
| 42 | Disconnection & dismantling existing old Electrical installation, Switch-board, wiring, Electrical fitting/fixtures etc. with owns tools & takles incl. mending good damages as per GS at ground floor and clearing/removing from the site as per direction of EIC |
| 43 | Add. G.S.T.@ 18% on total of item |
| 44 | Add. LWC.@ 1% on total of item Please Enable Macros to View BoQ information |
