|
| 1 | Geophysical survey charges |
| 2 | Upto 60m.Depth ending below Ground Level |
| 3 | From 60m and upto 90m depth ending from G.L. |
| 4 | From 90m and upto 120m depth ending from G.L. |
| 5 | From 120m and upto 150m depth ending fromG.L. |
| 6 | From 150m and upto 180m depth ending fromG.L. |
| 7 | From 180m and upto 197m depth ending fromG.L. Reaming 150mm dia pilot bore to 300mm. Diabore as directed by the Departmental Officers. |
| 8 | Upto 60m.Depth ending below Ground Level |
| 9 | From 60m and upto 90m depth ending from G.L. |
| 10 | From 90m and upto 120m depth ending from G.L. |
| 11 | From 120m and upto 150m depth ending fromG.L. |
| 12 | From 150m and upto 180m depth ending fromG.L. |
| 13 | From 150m and upto 180m depth ending fromG.L. |
| 14 | Electrical logging charges |
| 15 | Reaming 300mm dia pilot bore to 400mm. Diabore as directed by the TWAD Board Officers. Upto 60m.Depth ending below Ground Level |
| 16 | From 60m and upto 90m depth ending from G.L. |
| 17 | From 90m and upto 120m depth ending from G.L. |
| 18 | From 120m and upto 150m depth ending fromG.L. |
| 19 | From 150m and upto 180m depth ending fromG.L. |
| 20 | From 180m and upto 197m depth ending fromG.L. |
| 21 | Supply and delivery of 200 mm dia pvc casingpipes(plain and screen pipes)and specials 200 mm dia OD PVC plain casing pipe CM |
| 22 | 200 mm dia pvc ribbed screen casing pipes |
| 23 | 200 mm borewell Top cover |
| 24 | 200 mm bottom dummy |
| 25 | Labourcharges for inserting 200mm PVC Casingpipe including packing the annular space withbibbles of approved size and quality as approved bythe Deparmental officers. |
| 26 | Charges for developing the bore wells with aircompressor of 600 cfm capacity (minimum 8hours) including transportation labour and fuelcharges for compressor as direct by dept officers |
| 27 | 200 mm bore Top cap using M.S sheet |
| 28 | Earthwork excavation in all classes of soils and depositing on bank with an initial lead and lift |
| 29 | Filling with good river sand into foundation and basement including cost and conveyance of all |
| 30 | CC 1:4:8 mix using 40mm ISSHBG metal including cost and conveyance of all materials to |
| 31 | Reinforced Cement concrete 1:1.5:3 mix using 20mm ISSHBG metal from approved sources |
| 32 | Brickwork in CM 1:5 mix using country bricks of standard size including cost and conveyance |
| 33 | Brickwork in CM 1:5 mix using country bricks of standard size including cost and conveyance |
| 34 | Special ceiling plastering in CM 1:3 –10mm thick including cost and conveyance of all materials |
| 35 | Plastering in CM 1:5 ,12mm thick including cost and conveyance of all materials to work site |
| 36 | Flooring with Granolithic flooring to 25mm thick using CC 1:2:4 mix using 20mm ISSHBG metal |
| 37 | Painting the newly plastered wall surface with two coats of Plastic Emulsion Paint outside the |
| 38 | Painting two coats with ready mix paint of approved colour and trade for doors & windows |
| 39 | Supplying and erriecting, centring for plane surfaces structures such as RCC slab, beam etc., |
| 40 | Supplying and erriecting, centring for plane surfaces structures such as RCC slab, beam etc., |
| 41 | Supply and fabrication of steel including cost and conveyance of steels to worksite including |
| 42 | Supplying Steel Door and windows as per standard specification Door of size0.90mx2.10m |
| 43 | Towards Labour charges for Fixing of Steel Doors |
| 44 | Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor |
| 45 | Supply and fixing of 15w CFL Lamp (spiral lamp) for existing holder on wall etc complete. CFL Lamp |
| 46 | Supply and fixing of 16amps DP Switch with metal clod of 500v with tube connection 32Amps Board main switch |
| 47 | Supply and run of 2 of 6s.qm 84/100 pvc SC Unstrenthed on condition of 1100v grade in |
| 48 | Supply and run of 2 of 6s.qm 84/103 pvc SC Unstrenthed on condition of 1100v on 7/70 GI Service wire |
| 49 | Towards cost and supply of RCC Jolly of size 0.60*0.60m |
| 50 | 3 Phase submersible pump set with duty Of100lpm X 200 m head |
| 51 | 10.00 H.P. Panel Board Starter |
| 52 | 63 mm HDPE Pipe |
| 53 | 63mm SS Nipple |
| 54 | 4Sqmm Cable |
| 55 | 65mm MS Clamp |
| 56 | 65mm GI Elbow |
| 57 | 65mm GI Flange |
| 58 | Charges For Erection Of Submersible Pump Set InBore Well UP IO 10.0HP |
| 59 | 7/16 copper wire |
| 60 | 7/20 GI wire |
| 61 | Wooden board 2 nos |
| 62 | 100 Ams Fuse Carrier |
| 63 | Photo Chare |
| 64 | Name Board Please Enable Macros to View BoQ information |
