|
| 1 | Item Wise BoQ BoQ_Ver3.0 Item Wise Normal INR Only INR Select, Excess (+), Less (-) Tender Inviting Authority: Superintending Engineer, Electricity Construction & Work Circle-2, P.V.V.N.L., Meerut Bought Out Name of Work: Construction of 33KV Link Line from 33/11 KV Substation Khadoli to 33/11 KV Substation Khadoli Rohta Road Dist. Meerut. Direct Tender Reference No : 05/ECWC-2/MRT/2026-27 Quote for Supply Portion only Bidder Name : Quote for Erection Portion only PRICE BID1. This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns after validating the sheet, else the bidder is liable to be rejected for this tender.2. Bidders are allowed to enter the Bidder Name and Unit Ex-Works Price and GST in %age only.3. All the material and erection practices shall be as per tender specification.5. Above Schedule Structure and quantities is provisional and may vary as per site requirement with due approval.6. Indicative scope of works and quantity of Items/Materials required for above work shall be as per the Price Bid. Any other material if required to complete the job and not mentioned above, shall have to be provided by the bidder without additional cost.7. Financial evaluation and selection of 'L1 Bidder' shall be done on the basis of total amount. The rates received in the tender will be final after the approval of the Competent Authority/Committee and the competent Authority/committee will have the right to negotiate in tender rate/amount.8. Tenderer must be fill-up the enclosed terms & conditions sheet and attached with 1st Part of Tender as well as scanned copy of same will be uploaded on NIC Website alongwith other documents.9. Bidders must be filled up the GST in %age, Otherwise it is assumed G.S.T. rates are included in the given ex-works price (Rs./Unit). NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Works Item Code Tender Qty. Unit Estimated Rate Bought-out/Direct Specify Bought-out/Direct Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Unit Ex-Works Price(Rs./unit) Excise Duty(Rs/Unit) CST/VAT(Rs/Unit) Other Taxes & Duties(Rs/Unit) Freight & Insurance Charges(in Rs./Unit) Unit FOR Dest. Supply Price incl. all Taxes and Duties(in Rs./Unit)(F+G+H+I+J) Total Value for Supply or Erection (In Rs.)(C x F) GST (in Rs.) in %age Total Value for GST (in Rs.) (F*M/100) Total Unit Price incl. GST (in Rs.) Total Amount excl. GST (in Rs.) (4×13) Total Amount incl. GST (in Rs.) (4×26) TOTAL AMOUNT In Words |
| 2 | Supply by Contractor :- (Items provided as per GTP/Respo Drawing) Stone Pad |
| 3 | Bracket Clamp for Top Channel TPMO & Fuse Set etc. with Bolts & Nuts |
| 4 | Al. P.G. Clamp Dog to Dog |
| 5 | E-Bracket for 33 KV Line |
| 6 | Al. Binding Wire 6 SWG |
| 7 | Barbed Wire GI |
| 8 | Danger Board with Clamp |
| 9 | Number Plate with Clamp |
| 10 | Galvanised Channel 100x50mm, 2400mm long |
| 11 | Galvanised Channel 125x65mm, 3200mm long |
| 12 | MS Nut & Bolts |
| 13 | G.I Pipe 150 mm Dia, 3 mtr long |
| 14 | Holding Clamp for GI Pipe |
| 15 | HDPE Pipe PE-100, PN-6, DN-160mm dia |
| 16 | Earthing Rod (2540×20mm) |
| 17 | 11 Mtr. PCC Pole |
| 18 | 33KV 3x300 mm2 XLPE Al. Cable |
| 19 | 33KV Disc Fitting 70KN |
| 20 | 33KV Disc insulator 70KN |
| 21 | 33KV Pin insulator 70KN (Polymeric) |
| 22 | ACSR Dog Conductor |
| 23 | Earthing Rod (2540×20mm) |
| 24 | G.I. Wire 6/8/10 SWG |
| 25 | Stay Set 20x1800mm with stay wire complete |
| 26 | Line Isolator 800 A, 33 KV |
| 27 | Various Type of Jointing Kit (indoor/outdoor) |
| 28 | Supply & fixing of copper clamps such as Isolator, LA, Transformer end clamp, fuse set, post insulator, PG clamp etc. complete with nut, bolt & washer for Dog / Panther Conductor |
| 29 | 33KV LineThe excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I Nut bolt & washer, V-type X-arm, Pin Insulator, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required.Single Pole(b) 11M Long PCC Pole |
| 30 | Riser Double PoleThe excavation of foundation pit in mix soil/normal soil/soft soil & hard rock and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all clamps size (65x8mm), Nut bolt & Washer, Stone Pad, Lugs, Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports & hardware material from sectional store to pit site as well as an fabrication work if required. Fixing of 04 Nos.G.I Channel 100x50x2.4Mtr (With arrangement of 06 Nos. 33KV Pin insulator with Pin). The work also includes cutting of channel/angles, making holes on G.I Channel / G.I Angle, spring washer of proper size for channel/angle. Contractor also provide G.I Channel clamps and E- clamps at his own cost as per Respo Norms.(a) Riser Double Pole on 11M PCC Pole |
| 31 | Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per drawing. Work includes back filling and proper ramming.(i) Single Pole(a) 11M PCC Pole |
| 32 | (e) Riser Double Pole 11M Long PCC Pole |
| 33 | Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 33KV and Stay Clamps. |
| 34 | Earthing of supports with M.S. earth Rod of (20x2500)mm long including excavation of pit and driving M.S.Rod 3.0M apart from suppor and 0.5M below the ground level and connecting belowl the earth electrodes with the help of M.S.wire No.8SWG, M.S.Nut bolt & washer and earthing lugs. |
| 35 | Laying, spreading, lifting and final sagging of 3 phases ACSR Dog conductor in accordance with Line chart includidng binding and fixing of all accessories in 03Nos. Conductor in parallel. |
| 36 | Making Jumpers on Sectional Pole, by providing & fixing of P.G.Clamps of proper sizes, suitable for Dog Conductor/ 33KV, 3x300Sq.mm XLPE cable. (b) Riser Double Pole |
| 37 | Providing & fixing of SMC Danger board at each location as per specification of the drawing. Size 200mmx250mm & 3mm thickness with M.S.Clamp & nut & bolt for 33KV |
| 38 | Providing & fixing of SMC Number Plate at each location as per specification of the drawing. Size 200mmx250mm & 3mm thickness with M.S.Clamp & nut & bolt for 33KV Line. |
| 39 | Making H.T.Connection of the proposed line from 33KV Line. The work consists of fixing & fabrication of Dropper Channels, & fixing of Disc Insulators, Pin Insulators, jumpering with P.G.Clamps, clamping and binding etc,as per site conditions. |
| 40 | Providing & Wrapping of barbed wire (2.0Kg per Pole) on 33KV ST Poles SP-55/SP-72 as anti-climbing device for a length of 0.9Mtr. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75Mtr. from the ground, complete with providing and fixing of lower end & upper end clamps made of M.S.Flat 40x5mm complete with nuts & bolts. |
| 41 | Painting of following supports/structures of 33KVLine, with two coats of synthetic enamel aluminium paint after one coat of ready mix primer, including cost of all material, as well as rubbing/cleaning of surface as required for proper completion of work:-(a) 11 Mtr. STP Pole (including all channels/x-arms/clamps etc.:) |
| 42 | UG Cable (HDD Method) 33 KV (Railway Crossing /Road Crossing including NHAI)Digging of Pit by excavation of earth of 1600x1600mm size for 33KV line |
| 43 | Laying of HDPE Pipe PE-100, PN-6, DN-160mm dia by HDD trenchless method, as per site requirement. |
| 44 | Laying of 33KV, 3x300Sq.mm XLPE cable in HDPE Pipe PE-100, PN-6, DN-160mm dia by HDD trenchless method, as per site requirement. |
| 45 | Back filling of excavated earth in the pit upto the ground level and ramming properly. |
| 46 | Safe laying of 33KV, 3x300Sq.mm. XLPE Cable in Cable Trench to respective Double Pole. |
| 47 | Providing & Laying of Ist Class Bricks, along the length on both side of 33KV XLPE Cable in Cable trench and Stone Slab of size 450x600x40mm on top of the Cable, Providing 75mm thickness River sand for cushion beneath and 75mm above the cable as per specification. |
| 48 | Laying of 33KV, 3x300Sq.mm XLPE Cable in the air on cable Riser Double Pole, existing trench cable trench, nala x-ing & M.S.Pipe and making connection with 33KV over head line at both ends. |
| 49 | Providing and fixing 150mm dia (Minimum 2mm thick) 2mm thick 3M long G.I.Pipe over 33KV, 3x300Sq.mm XLPE Cable before mounting the 2No. Cable on double pole. Work includes providing & fixing of Clamp, sealing of top and bottom end of the G.I.Pipe. One end of G.I.Pipe is to be buried under earth about 500mm. |
| 50 | Making of 33KV Outdoor type cable end termination by heat shrinkable XLPE Cable Jointing Kits and crimping with proper size aluminium lugs. Work includes providing Aluminum lugs, insulating tapes etc as per specifications. |
| 51 | Supply & fixing of cable route marker along the route of 33KV cable with proper grouted with proper painting & marking PVVNL, 33KV HT Cable. |
| 52 | UG Cable (Open Trench Method) 33KVDigging of Trench by excavation of earth of 1050x750mm size for 33KV line |
| 53 | Laying of 33KV 3×300mm2 Cable & back filling of earth including Supply & Laying of Ist Class bricks work for making chulla and sand work for cushin.and stone slav over the chulla |
| 54 | Safely laying of 33KV 3×300mm² XLPE cable along with spare cable into trench including loop |
| 55 | Safe laying of 33KV XLPE cable in Air on Double on D/P/Riser |
| 56 | Road restoration charges for 1Mtr wide Kuccha Road-Pucca Road (Inter locking Tiles, Bricks Road (Cemented, Concrete & Black road only) & Developed green belt only) or Deposite charges to take the permission/approval/NOC from any Development Authority/Govt. Body/Forest Deptt./and other concerned Deptt. for construction of 33KV line(a) Kuccha Road |
| 57 | (b) Puckka Road |
| 58 | Cartage of empty cable drum from site to PVVNL store including loading & unloading at both ends respectively. |
| 59 | Survey charges |
| 60 | Sundries |
| 61 | Lug for ACSR Dog Conductor |
| 62 | Extra cable stand for 33 kv line |
| 63 | 10 inch exhaust fan complete Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select % 0.0 0.0 Zero Only Quoted Rate in Words Zero Only Please Enable Macros to View BoQ information |
