|
| 1 | CIVIL WORK |
| 2 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity. |
| 3 | Side shuttering including propping etc. complete (to achieve finish F 2 for :Block joints of foundation stilling basins buckets, aprons etc. (non -suspended horizontally laid mass concrete) |
| 4 | Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm |
| 5 | Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . - 1200 mm Sweep BEE 1 Star rated (service value >=4.0 to < 4.5 ) |
| 6 | Supply & Fixing of Water + AFFF 6% Mechanical Foam type Fire Extinguisher (Stored Pressure type) conforming to IS:15683:2018 , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Squeeze grip Forged brass release valve with Inbuilt safety release device, Diaphragm Type, 0 to 25 bar range pressure gauge, 450 mm long EPDM discharge tube, QR code for Product Traceability including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .- Capacity - 6 Ltrs. |
| 7 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 2 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR - 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. |
| 8 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 2 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR - 2 x 6.0 sq.mm |
| 9 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & its ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR - Short point (up to 3 mtr.) |
| 10 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & its ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR - Medium point (up to 6 mtr.) |
| 11 | Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb in existing holder or fixture as required with system lumen efficacy ≥100 lm/Watt output ,pf 0.95 , CRI >70, minimum life time of minimum 25000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer Annexure \\"A\\" attacheded with this BSR. - 18/20 Watt |
| 12 | Providing and Laying in position of Cement concrete Nominal mix (1:2:4) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm |
| 13 | Drilling holes of 35 mm diameter for anchor rods.Upto 1.50 m. depth |
| 14 | Supply of Tor steel anchor bars of required diameter, length and shape at site of work complete. |
| 15 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil |
| 16 | Supplying and fixing of thermal insulation on exposed roof (underdeck) with 25 mm thick Cross Linked Closed Cell Polyethylene FR-XPE insulation of density 33 Kg/m³ with adhesive etc. as required & finally fixed with the help of rawl plug, dash fasteners & adhesive in ceiling of pieces in size of 900x900 mm or 1200x1200 mm. etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 17 | Labour charges for Fixing of anchor bars in neat cement grout including cost of cement and curing etc. complete |
| 18 | Section: Oil Processing Unit at Chikarda(173155) |
| 19 | Digital weighing Scale, Capacity 200 Kg. with 2 x 2 feet stainless steel platform and digital display . |
| 20 | Digital weighing Scale, Capacity 5 Kg. with 1 x 1 feet max , stainless steel platform and digital display . , waterproof loadcell, Along with one each of 1kg, 500 gm and 50 gms , 20 gms and 10 gm standard weight stones |
| 21 | SS Storage Tanks SS 304 , 200 Lts. Capacity 3 mm thickness |
| 22 | Hand Pallet Truck 1. 5 Mt Capacity with nylon tyres |
| 23 | Filter press 12” x 12” - 12 plates complete with filter brass cokes, 2 sets of filter clothes, tomi bar, 2 spanners, oil collection channel (made of SS 304), bottom dish & strong table made of MS for height of filter press 1.5 Hp single phase dimensions ( 3.4 X 1.9 X 3.0 )feet filtration 50 - 80 litres per hour |
| 24 | Bottle Capping Machine : Bottle capping machine hand held 0-50 mm dia hand-held 0-50 mm dia, Weight (Approx.) : 1.2 kg ,Material : Stainless Steel, Power Supply : 110V AC , Frequency: 60 Hz, Power consumption: 80 Watt, Automation: Manual, Cable length: 2.0 m, Operation forms: Handheld, Capping diameter : 0-50 mm, Production capacity: 30-90 bottles/minute (depending on proficiency), Clutch Adjustable |
| 25 | Plastic pallets: Flat Top (1000 X 800 X 125 mm), injection moulded, static weight 1000 kg unified load , Dynamic 500 g min . Material HDPE / PP |
| 26 | VHF Oil pump for lifting oil from filter to storage 1 hp single phase pump with motor and 5 mts flexible pipe |
| 27 | Oil Expeller Machinel: 6 Bolt Single Gear with Heavy Duty Oil bath and Bearing of Chamber size not less than 24''x 4.1/2'', with V - Belt Pulley and other necessary accessories. Capacity - 60kg. Per hour . 7.5 Hp 3-phase Motor. dimensions ( 2 X 5 X 6 )feet with motor and installation |
| 28 | Groundnut decortication machine 100 kg / hr Groundnut decortication machine with grader:capacity 100 kg To 400 Kg / hr : Material of Construction: MS, Loss peanut, Loss peanut : Negligible, Motor Crompton or equivalent :3HP, Single Phase , Operation Mode: Manual, Power 4.5 KW, Weight 100 Kg . |
| 29 | Others: Transportation, Transit Insurance, 3-years warranty after 1 year from installation, 3 years Annual Maintenance Contract after 1 year from installation, training 2 days , spares , tool box etc. , All connecting piping between tanks of SS 304, Control panel with wiring from each machine up to supply power point ( 30 meters ) and main switch |
| 30 | Bottle filling machine single nozzle Bottle filling machine, Single nozzel with compressor 1/2 hp single phase motor , foot operated switch , starter as required. |
| 31 | Lab Equipment Refractometer Range 1.32 to 1.53 Refractive Index / 0 – 100 Brix for viscosity |
| 32 | Lab Equipment moisture meter Three Scales: Brix 58.0-92.0%, Water 13-27%, Baume 38-43°, Accuracy: Brix: ±0.5% / Water: ±1% / Baume: ±0.5°, Resolution: Brix: 0.5% / Water: approximately 1% / Baume: 0.5°, Max. Sample Temp.: 90° C Length: 148 mm |
| 33 | Bag stitching machine, with spare needles (12nos) and thread box |
| 34 | Section: Pulses / Dal / Besan Processing Unit at Chikarda(173174) |
| 35 | Digital weighing Scale, Capacity 200 Kg. with 2 x 2 feet stainless steel platform and digital display . |
| 36 | Digital weighing Scale, Capacity 5 Kg. with 1 x 1 feet max , stainless steel platform and digital display . , waterproof loadcell, Along with one each of 1kg, 500 gm and 50 gms , 20 gms and 10 gm standard weight stones |
| 37 | Dal Polisher : (Daal Polisher machine) 100 Kg Per Hour |
| 38 | Pouch filling machine Pouch filling machine 15-500 gms SS LD 1000 ( Poweder Capacity 15GM TO 500)Automatic Weighing And Pouch Packing Machine (Maximum Open Roll Can Use MM , Capacity Depends on Materialr |
| 39 | Vibro Sifter30\\" Vibro Sifter MS Body & SS sifter part 30\\" 80-100 kg per hour with extra mesh for besan and atta sifting . Mesh size 40 mesh extra mesh 1 No |
| 40 | SS Storage Tanks: 3 Nos 100 Lts Capacity 3 mm thickness |
| 41 | Bag stitching machine, with spare needles (12nos) and thread box |
| 42 | SS Table SS 304 Top and Mounted on MS Frame of. Top 2.5 Feet (w) X 4 Feet (L) X 2.5 Feet (H) |
| 43 | Label Printing machine hand held 5 line, Handy Batch Coder Machine For MRP, Expiry ,Date Print |
| 44 | Mini Dall Mill with all motors and starters 50-60 Kg / Hr, MS Motor, 3 Hp Single Phase (4X 4.3X 5) feet |
| 45 | Hand Pallet Truck 1. 5 Mt Capacity with nylon tyres |
| 46 | Others: Transportation, Transit Insurance, 3-years warranty after 1 year from installation, 3 years Annual Maintenance Contract after 1 year from installation, training 2 days, spares , tool box etc. , All connecting piping between tanks of SS 304, Control panel with wiring from each machine up to supply power point ( 30 meters ) and main switch |
| 47 | Plastic pallets: Flat Top (1000 X 800 X 125 mm), Neelkamal or equivalent. injection moulded, static weight 1000 kg unified load , Dynamic 500 g min . Material HDPE / PP |
| 48 | Destoner cum Grader with Aspirator 3 HP | 500 Kg/Hr | Multi-Grain Cleaner Build: Heavy-duty MS body with top-mounted grading rack and dual sieves |
| 49 | Pulveriser : Double Chamber Air Lock Pulveriser 60kg/Hr, 5 Hp 3 Phase (5X4X6) feet SS Beater, Aluminium Cast chamber , Please Enable Macros to View BoQ information |
