|
| 1 | Chair Three Seater Steel (TP as per sample held in GE office) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 2 | Supply and fixing of new set of Chair three seater as per drawing and as directed by Engr-in- charge. |
| 3 | Supply and fixing of new arms of Chair three seater as per drawing and as directed by Engr-in- charge. |
| 4 | Supply and fixing of new legs of Chair three seater as per drawing and as directed by Engr-in- charge. |
| 5 | CHAIR REVOLVING EXECUTIVE/LONG BACK (TP as per sample held in GE office) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 6 | Replacement worn-out cushion and tapestry cloth, for the seat shall be of 75mm thick foam of 40 density of make sleep well/kurlon covered with good quality tapestry cloth of approved shade (cost of cloth not less than Rs. 250/- per meter) as approved by GE/Engr-in-Charge. complete all as shown on drawing and as directed. Make: Sleepwell/ Kurlon / Featherlite |
| 7 | Supply & fixing new twin wheel castors (01 set of wheel assembly i.e. 05 twin wheels) complete all as shown in drawing and as directed. |
| 8 | Replacement of broken/unsv tilting mechanism with new tilting mechanism, complete all as shown in drawing and as directed. |
| 9 | Replacement of unsv/broken gas lifting mechanism complete all as shown in drawing and as directed. |
| 10 | Replacement of broken handle make up of black integral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant. |
| 11 | Supply & fixing new PVC base (5 leg) of chair complete all as shown in drawing and as directed. |
| 12 | Chair Computer all type :- (TP as per sample held in GE office) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 13 | Supply & fixing new twin wheel castors (01 set of wheel assembly i.e. 05 twin wheels) complete all as shown in drawing and as directed. |
| 14 | Replacement of broken/unsv pedestal assembly with complete set complete all as shown in drawing and as directed. |
| 15 | Replacement of broken/unsv tilting mechanism with new tilting mechanism, complete all as shown in drawing and as directed. |
| 16 | Replacement of unsv/broken gas lifting mechanism complete all as shown in drawing and as directed. |
| 17 | Replacement of broken handle make up of black integral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant. |
| 18 | Replacement of unsv/worn-out foam on top of 12mm thick hot pressed plywood upholstered polyurethane foam. The back foam shall be designed with contour lumber support for extra comfort with PVC lapping all foam shall be of 40 density and 50mm thickness. |
| 19 | Replacement of worn-out fabric and PVC lapping with new fabric as the colour of fabric approved by GE/Engr-in-Charge the fabric material shall be of acrylic, polyester, poly-viscose, polypropylene; the PVC lapping all around the foam and fabric. |
| 20 | Supply & fixing new PVC base (5 leg) of chair complete all as shown in drawing and as directed. |
| 21 | Chair writing all type :- (TP as per sample held in GE office) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 22 | Replacement of worn-out fabric/cloth from the existing chair writing and replacing it with new fabric/cloth the colour, texture and shed of fabric shall be got approved from GE/Engr-in-Charge as per the dimension, shape and size shall be as per drawing. |
| 23 | Taking out unserviceable seat and back of Chair writing Steel and S&F new seat and back hotpressed plywood upholsterd with fabric (cloth of approved colour and shade.) and moulded polyurathane foam with PVC lipping alround. Foam shell be 50mm thick 50D. |
| 24 | Supply & fixing new armrest made of black integral skin the armrest as per drawing, the armrest made of polyurethane with 75-85 shore ‘A’ hardness and reinforced with MS-Inert i.e. shall be scratch and weather renitent both hand rest section to have stage towards front. |
| 25 | Welding of all broken joint of mild steel tubular surface with gas welding, all joint fixing shall be done in accordance with standard workmanship and specification. |
| 26 | Spray painting of mild steel tubular frame with two coats of synthetic enamel black paint. |
| 27 | Replacement of worn-out rubber stopper with the new rubber stopper. |
| 28 | Chair ornate supreme :- (TP as per sample held in GE office) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 29 | Removing the old torn /dammaged seat cushion of the chair ornate and providing the same with new seat cushion as per trade pattern /existing chair ornate. Colour and shade of mesh/ Cloth /rexin as approved by GE/BSO. |
| 30 | Removing the old torn /dammaged back cushion of the chair ornate and providing the same with new back cushion as per trade pattern /existing chair ornate. Colour and shade of mesh/ Cloth /rexin as approved by GE/BSO. |
| 31 | Renewal of chair plastic ornate as per trade pattern al as directed by Engr-in-Charge.(Make: Supreme/Neelkamal/Easy) |
| 32 | Chair Cushion With Arm :- (TP as per sample held in GE office) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 33 | Supply & fixing new seat made of 12mm thick BWR grade plywoood over which 50mm thick 32 density foam cushion shall be fixed with PVC lipping all round. The foam and plywood shall also be covered with best quality fabric as approved by GE/BSO. |
| 34 | Supply & fixing new back made of 12mm thick BWR grade plywoood over which 50mm thick 32 density foam cushion shall be fixed with PVC lipping all round. The foam and plywood shall also be covered with best quality fabric as approved by GE/BSO. |
| 35 | Replacement of new arm with polyurethane reinforced with MS insert arms as per tarde pattern/existing in chair all as directed by Engr-in-Charge. |
| 36 | Table computer all type: TP as per sample held in GE office) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 37 | Supply & fixing new top of table computer made to shape out of 18/19mm thick prelaminated partical board exterior grade one side teak faced and other side white face with 4 mm thick 19 mm half round teakwood edging all around all as per drawings. Painting of table frame with two coats of synthetic enamel olive green/black/white/grey paint over a coat of red oxide zinc chrome primer after reapair the joints with gas welding/nut-bolts/screw and washer, duly scrapping cleaning of surfaces with abrasive emery paper for smooth painting, complete all as shown in drg and as directed. |
| 38 | Legs board (right/left) all as per directed by Engr- in- Charge. |
| 39 | Keyboard tray with channel as per directed by Engr- in- Charge. |
| 40 | Self (Top, Verticle,Buttom) as per directed by Engr- in- Charge. |
| 41 | Drawer with channel as per directed by Engr- in- Charge. |
| 42 | Nylon buffers as per directed by Engr- in- Charge. |
| 43 | Painting/polishing of table computer as per note all as directed by Engr-in-Charge. |
| 44 | MIRROR DRESSING GENTS :- (Drg No FD/E6/MAP/16) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 45 | Supply & fixing new Mirror 1150mm H x450mm W x 5.5mm Thick electro copper plated mirror totally free from distortion, frame in teakwood size made of 25X38mm alround and 12mm thick BWR Grade phenol bonded plywood type in the back all as shown on drawings. Make: Modigaurd/ Saint gobin/ AIS |
| 46 | Supply & fixing new movable shelf made of 5.5mm Thick glass ofsuperior quality complete all as shown on drawing and as directed. |
| 47 | Replacement anyone of sides of Mirror dressing gents map made of pre-laminated particle board exterior grade with one side teak faced and other white face of size 18/19mm thick. complete all as shown on drawing and as directed. Make:Century ply/ Archid Ply/ Action Tesa |
| 48 | Replacement hinges of mirror dressing gents made of 3mm this MS sheet. complete all as shown on drawing and as directed. |
| 49 | Supply & fixing new steel bow handle of 100 mm long superior quality. complete all as shown in drawing and as directed |
| 50 | Table Office Officer :- (TP as per sample held in GE office) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 51 | Supply and fixing of new top as per trade pattern. |
| 52 | Legs as per trade pattern all as directed by Engr-in-Charge. |
| 53 | Lock as per existing pattern and shape all as directed by Engr-in-Charge. |
| 54 | Painting/polishing of table office officer as directed by Engr-in-Charge. |
| 55 | TABLE BED SIDE STEEL(Drg No FD/E6/MAP/15 (R)) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 56 | Replacement of unserviceable/broken MS square pipe (18 gauge) with new 18mm MS square pipe black powder coated. |
| 57 | Supply & fixing new top of table bed side18mm thick pre laminated particle board with PVC edging alround. |
| 58 | Supply & fixing new telescopic channel on both the drawer (02 set telescopic channels). |
| 59 | Supply & fixing new MS-4’’ handle on both the drawers complete all as shown in drawing and as directed. |
| 60 | Replacement of unserviceable/broken ply wood thickness of 6mm commercial ply for both the drawers and 12mm commercial ply shall be for the back side of the drawer. |
| 61 | Painting of table bed side steel frame with two coats of synthetic enamel olive green/black/white/grey paint over a coat of red oxide zinc chrome primer after scrapping cleaning of surfaces with abrasive emery paper for smooth painting, complete all as shown in drg and as directed. |
| 62 | Bar Stool Steel Wilth Cushion :- (TP as per sample held in GE office) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 63 | Material and labour for cleaning the surface of stool steel by scraping with emery paper filling holes with putty wherever reqd and shall be spray painted internally and externally with two coats of synthetic enamel paint of approved shade ones where required all as specified and directed on site. |
| 64 | Material and labour for removing old unserviceable castro wheels and old fabric form seat from the stool revolving all type and supply and fix new castro wheel and fabric form seat all as specified and directed on site. |
| 65 | BED HARD STEEL :- (Drg No FD/E6/MAP/15 (R)) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 66 | Supply & fixing new plywood 12 mm thick 7 ply commercial BWR grade ISI Marked complete all as shown in drg and as directed . |
| 67 | (b) Painting of bed steel on all side with two coats of synthetic enamel olive green/black/white/grey paint over a coat of red oxide zinc chrome primer after after reapair the joints with gas welding/nut-bolts/screw and washer, duly, scrapping cleaning of surfaces with abrasive emery paper for smooth painting, complete all as shown in drg and as directed . |
| 68 | Sofa set 3+1+1 seater Make-Godrej Model : Premium lounge:- (TP as per sample held in GE office) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 69 | Taking down old unservicable cushion of sofa five seater upholsted/covered with high quality rexine cloths (cost of cloth not less than Rs 500 per RM) for seat and back as per required size and as per existing design and specification complete all as specified and directed by Engr- in- Charge. Make (Cushion) : Sleepwell/Dunlop/Cool foam. |
| 70 | Chair School with Hand board :- (Drg No. FD/E6/MAP/05) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 71 | Taking down the unservicable components of PVC seat of chair school with hand board and providing new components PVC seat of chair school with hand board of size and shape shown in Drg including Polishing/Painting of all exposed parts of chair school with hand board all as per drg & directed on site. |
| 72 | PUTEX Electric Mechanical (Motorized) ICU Bed (TP as per sample held in GE office) :-The work includes complete rapair, servicing, replacement of defective parts, testing and commissioning of Putex electric mechanical motorized ICU beds installed in the hospital, work shall be completed as per drawing, specifications and instructions of Engineer-in-Charge. |
| 73 | General repair and servicing :- Complete inspection of ICU bed including electrical and mechanical systems. Rectification of all faults, tightening, alignment, lubrication, backrest adjustment 00 to 700 and knee rest adjustment 00 to 400 and cleaning of all components for smooth functioning, in ICU bed complete all as shown in drg and as directed. |
| 74 | Replacement of electrical wiring, control box and motor system :- Supply and fixing of defective control box, wiring, power cable and handset/remote shall be complete all as shown in drg and as directed. Replacement of faulty electric motors/linear actuators (minimum 4 actuators) shall be complete all as shown in drg and as directed. Proper connection, insulation, and testing of complete system should operate on 220-240V AC supply. |
| 75 | Repair/replacement of mechanical components :- Repair or replacement of powder coated frame base and side railling, linkages, joints, adjustment screw rod parts and alignment issues shall be complete all as directed. |
| 76 | Hydraulic/Tilt mechanism :- Supply and fixing of defective hydraulic system/ tilt mechanism and complete installation shall be complete all as directed. |
| 77 | Gas spring/lifting mechanism :- Supply and fixing of unserviceable gas springs/lifting systems for Smooth functioning of backrest and knee rest movement shall be complete all as directed. |
| 78 | Wheel castors replacement:- Supply and installation of new twins heavy-duty castor wheels (01 set of castor wheels assembly i.e. 06 twins wheels) with locking system for ensuring smooth mobility and effective braking shall be complete all as directed. |
| 79 | Mattress cover :- Supply and fixing approved quality mattress cover fabric/rexine (cost not exceeding Rs. 450 per meter) and shall be as per sample kept in BSO’s office of shade as approved by GE / Engineer in charge. Make: Sleepwell/ Kurlon / Featherlite |
| 80 | Chair Verandah Offr (PVC Seat and Back):- (Drg No FD/MAP-II/06) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 81 | Material & Labour for removing old unserviceable PVC seat and back from chair verandah, cleaning tubular surface provided one coat of white paint and fixing new PVC seat and back as per approved matt pattern and fix rubber shoes for all the four legs etc complete all as drg and all as specified and directed. |
| 82 | Repair to TABLE CENTER GLASS TOP :- (TP as per sample held in GE office) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 83 | Supply & Fixing new glass top made of size 1200x600x10mm thick glass dark shaded superior quality and round shaped corner of (R-15). complete all as directed. Make: Modigaurd/ Saint gobin/ AIS |
| 84 | Repair to TABLE PEG GLASS TOP :- (TP as per sample held in GE office) :- Taking out old following unsv components and replacement with new components as per shape and size of original, complete all as specified and directed by Engr-in-charge. |
| 85 | Supply & Fixing new glass top made of size 450x300x10mm thick glass dark shaded superior quality and round shaped corner of (R-15). complete all as directed. Make: Modigaurd/ Saint gobin/ AIS Please Enable Macros to View BoQ information |
