|
| 1 | HYDT:Cost of drilling 200 mm X 165 mm X 175 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials,tools,drilling rig,Air Compressor and equipments,as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site. (a) 0.00 m Up to 50.00 m depth below G.L. In Rural Areas |
| 2 | (b) Above 50.00 m depth. In Rural Areas |
| 3 | Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6 mm wall thickness including welding charges, cost of pipe etc. all complete job. |
| 4 | Supplying all materials, labour, tools & equipments for fitting & fixing 200 mm dia MS cap over casing pipe complete job. (DWSD Item 117 B) |
| 5 | Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I |
| 6 | Providing clean coarse sand in filling in foundation trenches and/ or in plinth including ramming and watering in layers not exceeding 150 mm. thick with all leads & lifts including cost of all materials labours, royalty and taxes all complete as per building specification and direction of E/I. |
| 7 | Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I. |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, 1:4:8 (1 Cement : 4 Coarse sand (zone - III) : 8 graded stone aggregate 40 mm nominal size) |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 Cement : 1.5 Coarse sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string course, fillets, columns, pillars, abutment, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement.1:1.5:3 (1 Cement : 1.5 Coarse sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing including carriage of M.S. bars to work site,cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for Tata (Tiscon), SAIL, JSPL Electrosteel steels Ltd. Bokaro and Vizag {RINL}). |
| 12 | Carriage of materials. i) Bricks (lead 40 km ) |
| 13 | ii) Cement (lead 40 km ) |
| 14 | iii) steel (lead 40 km ) |
| 15 | iv) Sand (lead 15 km ) |
| 16 | Providing structural steel galvanised tubular hollow section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position, making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete. |
| 17 | Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 5000.00 litres Capacity Water storage Tank. |
| 18 | Transportation Charge. |
| 19 | Lifting of 5000 Litrs Capacity Tank up to 6.0 m height with lifting tools with rope and labour. |
| 20 | Making hole in Tank. |
| 21 | Making long screw in 32 MM G.I. pipe including supplying and fitting jam nuts and extra socket etc. |
| 22 | Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories. i) 1 HP (DC Pump) with 900 wp minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE) |
| 23 | Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I |
| 24 | Rising Main Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler), 65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main |
| 25 | 50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe |
| 26 | Distribution Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10 63 mm HDPE Pipe- |
| 27 | 50 mm HDPE Pipe- |
| 28 | 32 mm HDPE Pipe- |
| 29 | 20 mm HDPE Pipe- |
| 30 | Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end). 50 mm dia . |
| 31 | 65mm dia |
| 32 | Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10 |
| 33 | Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. For Rising 50 mm HDPE Pipe- |
| 34 | 65 mm HDPE Pipe- |
| 35 | Distribution 65 mm HDPE Pipe- |
| 36 | 50 mm HDPE Pipe- |
| 37 | 32 mm HDPE Pipe- |
| 38 | 20 mm HDPE Pipe- |
| 39 | 15 MM dia G.I. Pipe |
| 40 | Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge. |
| 41 | Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. (1) Elbow (a) 15 mm dia. |
| 42 | (2) Reducer Socket - (a) 20 x 15 mm dia. |
| 43 | (3) Nipple - (a) 15 mm dia. |
| 44 | (4) Plain Socket - (a) 15 mm dia. |
| 45 | Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram. |
| 46 | Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I. 50 mm dia and weight not less than 1.5 Kg. |
| 47 | 65 mm dia Full way valve |
| 48 | Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I 15 dia and weight not less than 400 Gm |
| 49 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. |
| 50 | Supplying materials , labours and equipment's for construction of 0.90 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I. |
| 51 | Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job |
| 52 | Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge. |
| 53 | Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. |
| 54 | Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I. Cement Lead 10 Km (avg.) |
| 55 | Sand Lead 36 Km (avg.) |
| 56 | Stone Chips Lead 11 Km (avg.) |
| 57 | 18% GST |
| 58 | Labour cess Please Enable Macros to View BoQ information |
