|
| 1 | Desilting the supply well , Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as requared beyond the work site , stacking, spreading, including necessary guarding, etc. complete as directed by E/I. Intake Well- Dia of Intake Well- 9.45 M at River Barakar Depth of Intake Well from H.F.L.5.00 M + Height of Intake Well from HFL-8.65.00 M =13.65 M Quantity of silt in Intake Well-1st lift |
| 2 | 2nd lift |
| 3 | 3rd lift |
| 4 | 4th lift |
| 5 | 5th lift |
| 6 | Intake Well- Main Gate's Shutter Repairing- Supplying and fixing-rolling shuters of approved make, made of required size of M.S.Iaths interlocked together through their intire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arragements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 -part 1 and M.S.top cover of required thickness for rolling shutters. 80x1.25mmM.S. Laths with 1.25mm thick top cover. |
| 7 | Repair of Intake Well Window- Providing Galvanised wire mesh of average width of aperture 1.4 mm and romin31 dia. of wire 0.63 mm |
| 8 | Fitting Fixing of Galvanised wire mesh on the window's top tncluding iron nail, binding wire etc. all complete job. On Lump Sump Basis |
| 9 | Providing and laying Reinforced cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc, up to floor five level, excluding the cost of centering, shuttering and finishing :1:11/2:3 (1 Cement : 11/2 Coarse sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) Gate Plate for weir's in Barakar river Repair of Intake Well hole - |
| 10 | Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffol -ding,taxes and royalty all complete as per building specification and direction of E/I. |
| 14 | Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning, sand papering the wall, scaffolding, curing and taxes all complete as per building specification & direction of E/I. |
| 15 | Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 16 | Hire Charge of crane in cluding fuel and operator for collecting and pick up the heavy scrape materials etc. all Complete. |
| 17 | Providing labours for loading unloading materials |
| 18 | Providing, erecting triple spur gear type Chain Pulley Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark. 5 Tonne Capacity sl. No. LF 1-4.Section 5 LF MJP-MechCSR 2023-24, page 19. |
| 19 | Providing, lowering, laying and placing in position, shrouding material for porous pipegallery / slotted pipe gallery / trench gallery with all leads and lifts involved includingtransportation of materials to site of works, screening and washing of materials andplacing in position with given section,etc. complete as directed by Engineer-in-charge. For 40 mm gauge pebbles- |
| 20 | For 12 mm to 20 mm gauge pebbles- |
| 21 | For Coarse sand (from river sand at site)- |
| 22 | Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I. a) Cement Lead 25 Km (avg.) |
| 23 | b) Rainforcement Lead 25 Km (avg.) |
| 24 | c) Sand Lead 36 Km (avg.) |
| 25 | d) Stone Chips Lead 11 Km (avg.) |
| 26 | Supplying all labours tools & Taking out existing Sluice valve & Pipe with the help of chain pulley , tripod & carrige to the Deptl. Store etc.all complete job as per direction of E/I |
| 27 | Supplying all materials, labours ,tools and equipments , for disjointing the flange joints including cutting the damaged nuts and bolts with gas cutter set if required, removing the old rubber insertion, scraping and cleaning both faces of flange all complete as per specification and direction of E/I. 150 MM S.V. - |
| 28 | 200 MM S.V. - |
| 29 | 250 MM S.V. - |
| 30 | Providing double flange sluice valve confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete. 150 MM S.V. - |
| 31 | 200 MM S.V. - |
| 32 | 250 MM S.V. - |
| 33 | Providing double flange sluice valve confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete. Providing and supplying ISI standard D.I. Specials & Fitting with sealing rubber gasket of S.B.R., complete with cast iron follower gland and M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including ED,CST, all taxes, etc. complete as per IS-9523 but including freight. JOSR P-21,108 A(a) |
| 34 | Supplying all labours, tools and equipments, movable Crain, tripod, chain pulley block at work site and laying and setting new and taking out D.I. pipe and fittings, with lubricants and others etc. all complete job as per specification and direction of E/I. |
| 35 | Dewatering the pipe line trenches by using pumps and other devices including disposing off water to safe distance as directed by Engineer in Charge ( including cost of machineries, labour, fuel) etc all complete . |
| 36 | Supplying , labours and tools for fixing C.I. Sluice Valve in trenchese with a pair of Tail Piece ,including making lead cauked joints and flanged joint as per I.S.S. specification,including supplying all joints materials (pig lead confirming to I.S.S. 782-1978,yarn, confirming to I.S.S. 6587-1972 and nut & bolts confirming to I.S.S. 1364-1983),including drilling holes in flanges if required as per specification & direction of E/I.(S.V. and Pieces to be supplied departmently free of cost). 150 MM S.V. - |
| 37 | 200 MM S.V. - |
| 38 | 250 MM S.V. - |
| 39 | Reconstruction of B.M. sluice valve chamber with replacement of 100 MM & 150 MM dia sluice valve with new one includind allied work etc. all complete job under Pandra Rural Water Supply Scheme. 2.40 x 1.20 x 1.05 M size S.V. Chamber - |
| 40 | 2.45 x 2.0 x 1.05 M size S.V. Chamber - |
| 41 | Cutting and taken out existing dirty slow sand filter media with clay including 30 m lead and 1.5 lift in the safe place from structure etc. all complte as per direction of E/I. |
| 42 | Providing labours & tools for seprating and grading course medium & fine size of gravel by screening properly and cleaning & washing the gravel and sandet as per specification and direction of E/I. (As Per Analysis No- 5) |
| 43 | Supplying all labours, tools and equipments for reused old filter media after cleaning , washing etc. all complete as per specification and direction of E/I. (As Per Analysis No- 4) |
| 44 | Dewatering of stagnate water from Intake Well for cleaning of surface, wall etc. all complete as per direction of E/I. |
| 45 | Supplying labours tools & tackles for cleaning filled silt & mud etc in all lift and disposal of spoils upto a lead of 50 mtr. All complete as per specification and direction of E/I. |
| 46 | Supplying all labours tools and equipment and cleaning the bed and wall of sump , Intake Well , Floculator, Ariator,Filter Bed, Drains etc. with wire brush, Nariyal brushes and broom etc including providing necessary scaffolding and taking out deposited silt & mud and final cleaning will be done with bleaching powder solution with accidental charge etc all complete as per direction of E/I. |
| 47 | Earth work in excavation in foundation isolated footing trenches in hard soil (Class B) and disposal of excavated earth as obtained to a distance of 50 mtr. Including all lift, leveling. Ramming the foundation trenches. Removing roots of trees, shrubs all complete as per specification of E/I |
| 48 | Providing coarse clean sand in filling in foundation trenches and in plinth including ramming and watering in layers not exceed 150mm thick with all lead and lift including cost of materials labours royalty and taxes all complete as per building specification and direction |
| 49 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 50 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 Cement : 1.5 Coarse sand (zone - III) : 3 graded stone aggregate 20 mm nominal size). |
| 51 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string course, fillets, columns, pillars, abutment, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement.1:1.5:3 (1 Cement : 1.5 Coarse sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) |
| 52 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). |
| 53 | Providing designation 75A brick work in C.M (1:6) in super structure with approved quality of clean coarse sand of F.M (2 to 2.5) including providing 10mm TK mortar joint cost of screening scaffolding racking out joint to 15mm depth. Curing taxes of royalty all complete as per building specification and direction of E/I |
| 54 | Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffol -ding,taxes and royalty all complete as per building specification and direction of E/I. |
| 55 | Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 56 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. BCD 5.10.1. |
| 57 | Jungle clearance including weeding out shrubs and small trees up to 150 mm dia (girth) and their removal as per building specification and direction of E/I. |
| 58 | Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning, sand papering the wall, scaffolding, curing and taxes all complete as per building specification & direction of E/I. |
| 59 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface throughly,scaffolding and taxes all papering including cost of scaffol ding and taxes all complete as per building specification & direction of E/I. |
| 60 | Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt, scales, smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I. |
| 61 | Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 62 | Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I. a) Cement Lead 25 Km (avg.) |
| 63 | b) Rainforcement Lead 25 Km (avg.) |
| 64 | c) Sand Lead 36 Km (avg.) |
| 65 | d) Stone Chips Lead 11 Km (avg.) |
| 66 | Earth work in excavation in foundation isolated footing trenches in hard soil (Class B) and disposal of excavated earth as obtained to a distance of 50 mtr. Including all lift, leveling. Ramming the foundation trenches. Removing roots of trees, shrubs all complete as per specification of E/I 300 MM dia DI k9 pipe- |
| 67 | Labour charge for one cutting of cast iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I. |
| 68 | Providing and supplying ISI standard D.I. Specials & Fitting with sealing rubber gasket of S.B.R., complete with cast iron follower gland and M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I. pipes including ED,CST, all taxes , etc. complete as per IS-9523 but excluding freight.300 MM dia DI k12 M.J. Coller-Weight |
| 69 | Supplyof C. I.Mechanical CompressionFlanged / Socket Tailpiece (Popularly known as ITM Flanged /Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes (asper-IS-1536/2001) and D. I. Pipes (as per IS:8329 / 2000). TheTailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands andM.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993.The rates are inclusive of cost of material, freight charges,loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc.completeas directed. |
| 70 | 300 MM dia DI k12 M.J. Coller |
| 71 | Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. |
| 72 | Providing and supplying Air Valve sasper IS-14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, includinginsurance, third party inspection charges, loading, unloading, transportation up to departmental stores, excludingGST levied by GOI & GOM in all respect etc. complete. 80 mm dia Air Valve Double Ball Flanged Type- PN 1.6 |
| 73 | Supplying labour & tools for fixing C.I. double acting Air valve in trenches as per specification and direction of E/I. (C.I. double acting Air valve to be supplied departmentally free of cost). 80 mm dia Air Valve Double Ball Flanged Type- PN 1.6 |
| 74 | 18% GST |
| 75 | Labour cess Please Enable Macros to View BoQ information |
