|
| 1 | Providing and fixing of 0.50 mm thick Colour coated High Rib Iron profile sheets of approved as approved by Engineer-In-Charge in roofing incld carriage of same upto site of work complete.The sheet should have a protective guard film of 25 mm mircon minimum to avoid scratches while transportation and should be supplied in single lenghth upto 12 mtr or as directed by Engineer -In-Charge.The Sheet shall be fixed using self drilling /Self tapping screws of size (5.5 x 55 mm) with epdm seal of same colour matching the shade of the sheets. |
| 2 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages. |
| 3 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete. On steel work incld all carriages complete. |
| 4 | Providing and fixing of PVC Wall Panelling /Ceiling Panelling made of finish PVC Sheets of approved make and shade including necessary framework,acessories ,edge trims and fixing with screws and adhesive and scafolding upto required height complete Job incld all carriages complete. |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages. |
| 6 | Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages. |
| 8 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete.50 mm thick with 20mm nominal size stone aggregate with carriage. |
| 9 | Providing and Applying Polyurethane (PU) seamless finish with Anticid performance Flooring System including Primer,Shock-absorbing base layer 8-10 mm thick,Self Levelling PU Base coats, PU wear Top coats,court line marking in approved colours as per technical specification and manufacuturer's instructions, over plastered leveled concrete /RCC floor surface incld all carriages complete. |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) including all carriages. |
| 11 | Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages. |
| 12 | Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class Kail wood including all carriages |
| 13 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately)., all complete as per direction of Engineer-in-charge. First class kail wood including all carriages 35 mm thick. |
| 14 | Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge First class kail wood including all carriages. |
| 15 | Providing and fixing glass Panes with Putty and glazing Clips in doors,Windows ,Clrestory Windows all complete with 4 mm thick glass Panes incld all carriage complete. |
| 16 | Providing and fixing ISI marked flush door shutters 35 mm thick conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of requiredsize with necessary screws incld all carriage complete. |
| 17 | Providing and fixing of Hardware items of ISI Marked of standard Quality and Make incld carriage.T.Bolts 100 mm. |
| 18 | T.Bolts 150 mm. |
| 19 | Handles 125 mm. |
| 20 | Handles 150 mm. |
| 21 | L-Drop (link) 200 mm. |
| 22 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc including all fitttings with carriage complete. |
| 23 | Hinges. |
| 24 | Almunium Window Hooks. |
| 25 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages. |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including all carriages. |
| 27 | 12mm Cement plaster of mix in 1 : 6 ( 1 cement : 6 coarse sand) including all carriages. |
| 28 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick incld carriages complete. |
| 29 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete.On concrete work including all carriages. |
| 30 | Finishing walls with textured exterior paint of required shade on Old work (two or more coats on existing cement paint surface applied @ 3.28 ltr/10sqm) incld all carriages. |
| 31 | Supply and Installation of premium Quality 3D White /graphic acrylic LED letters of 450 mm Height for nomencalture \\"INDOOR STADIUN SOPORE\\" fitted with all necessary fixtures viz LED concealed lights /frame work With Aluminium composite Panel bacground of size 5.5 m x0.45 m to be fixed seperately over structural steel frame work complete Job.The design to be approved by the intending Department as per the Directions of the site Engineer with all carriage complete. |
| 32 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete incld all carriage complete. |
| 33 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorptionless than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based highpolymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of tile 600x600 mm incld all carriage complete. |
| 34 | Marble work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining (veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1 cement: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).Raj Nagar plain white marble/Udaipur green marble/zebra black marble. (Area of slab upto 0.5 sqm) 16 mm thick including all carriage complete. |
| 35 | Sanitary:Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests incld carriage. |
| 36 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps incld carriage. |
| 37 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings incld carriage. |
| 38 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm incld carriage. |
| 39 | Providing and fixing toilet paper holder C.P. brass incld carriage. |
| 40 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms incld carriage. |
| 41 | Providing and fixing of Health Faucet with Hose Pipe for European water closet in all respects of approved Quality (Hindware) incld fitings and fixtures with carriage Complete. |
| 42 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms incld carriage. |
| 43 | Providing and fixing 15 mm nominal bore C.P. brass Long Nose bib cock of approved quality conforming to IS : 8931 incld carriage. |
| 44 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 incld carriage. |
| 45 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 25 mm nominal bore incld carriage. |
| 46 | Providing and fixing of CP Brass of 15 mm nominal Bore wall Mixer /Basin Mixer of approved Brand and manufacture incld all fittings and fixtures complete Job with carriage. |
| 47 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms incld carriage. |
| 48 | Providing and fixing of 100 mm dia PVC Pipes (Type B) of approved Brand incld allied acessoried like collars,Door Junction,Sockets,Bends etc and other fittings complete job with carriage. |
| 49 | Providing and fixing of 75 mm dia PVC Pipes (Type B) of approved Brand incld allied acessoried like collars,Door Junction,Sockets,Bends etc and other fittings complete job with carriage. |
| 50 | Providing and fixing of 40 mm dia PVC Pipes (Type B) of approved Brand incld allied acessoried like collars,Door Junction,Sockets,Bends etc and other fittings complete job with carriage. |
| 51 | Providing and fixing of 75 mm dia Floor Trap of approved Brand ,all fixtures complete with carriage. |
| 52 | Providing and fixing of 100 mm dia Sand Cast Iron grating for gully trap of approved Brand ,all fixtures complete with carriage. |
| 53 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe , 20mm OD(SDR-7.4) incld carriage. |
| 54 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe , 16mm OD(SDR-7.4) incld carriage. |
| 55 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank incld carriage. |
| 56 | Poviding and fixing of approved quality water heater (Geyzer) (Venus / Racold) brand, including standard quality fixtures and fittings etc; cost and carriage complete 50 ltr Capacity. |
| 57 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone.With common burnt clay (non modular) bricks of class designation 7.5 incld carriage. |
| 58 | Construction of Septic Tank and Sokage Pit:Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil . |
| 59 | Providing and laying of stone soling 75 mm thick incld ramming , dressing and watering all complete incld carriage complete |
| 60 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incld all carriages. |
| 61 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incld carriage. |
| 62 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve.Thermo-Mechanically Treated bars of grade Fe-500D or more incld carriage. |
| 63 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns incld carriages. |
| 64 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Cement mortar 1:6 ( 1 cement : 6 coarse sand) insuperstructure above plinth level upto floor five level incld all carriages complete. |
| 65 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) incld carriage. |
| 66 | Dry random rubble masonry with hard stone in foundation and plinth With bond stone.Quarry incld carriage. |
| 67 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete.50 mm thick with 20mm nominal size stone aggregate with carriage. |
| 68 | Providing and fixing in position 560 mm internal polycrete septic tank cover heavy duty (200 kg weight) with polycrete base provided with M.S sheet as per IS 12592 incld all carriages. Please Enable Macros to View BoQ information |
