|
| 1 | Construction for 115/125mm dia drilled tube well for drilling in all kings of soil rock for installation of hand pump with D.T.H Rig machine all complete including rigs, all compressor and equipments as well as fuel lubricant for making 125/115mm dia boring etcand cost of trasporting rig machoine and other cehicle up to site work as per specification and direction of Engieer-in-charge. |
| 2 | (a) Up to 30mtr. Depth bellow G.L in Rural Areas |
| 3 | (b) Beyond 30mtr in Rural Areas |
| 4 | Providing all equipments and labour for lowering 125mm dia bule UPVC casing pipe as casing for protecting the side form falling during the process of driling all complete job including carriage of meterial to work site. |
| 5 | Supplying labour cements and calucuim chloride or bentonite solution and equipments for grouting to casing pipe all complete job including carriage of material to work site as per specification & direction of E/I. |
| 6 | Supplying all tools. Equipments and labour and doing wasting. Flushing and development of drilled tube well to give clean and clear water all complete as per direction of E/I. |
| 7 | Supplying all materials labours and equipment including 125mm dia GI/CI cap 125mm dia T/W properly all complete and taking it out as per sepcification & direction of E/I. (the cap will be property of department) |
| 8 | Supplying all tools. Equipments labours and lowering 32mm dia G.I (Medium) pipe in DT in 3mtr. Length all complete job as per direction of E/I. including carriage of materials. |
| 9 | Supplying all tools. Labour for fitting and fixing deep well cylinder wthe necessary connention rod all complete job s per specification & direction of E/I. |
| 10 | Supplying all materials, labour for fitting and fixing of india mark 11 Hnad pump with all accerssorles all job complete as per direction of E/I. including carriage of maerials. |
| 11 | Supplying all materials, labour and equipment for construcing PCC (1.2.4) circular platform arind each drilled tube well including 12mm thick cment plaster (1:4) with neat cement puning over exposed suface as per UNICFF design etc. all complete including carriage of materials. |
| 12 | Supplying all materials, labour and equipment for construcing PCC (1.2.4) drain as per UNICFF design etc. all complete including carriage of materials. |
| 13 | Cost of standard I S I mark Deep well hand pump for india mark ll, I S I 15500 (Part)2/2004 with fatest revisio including 12mmx3 meter long 8 no connecting rods made of bright bar electro galvanzed fitted with couper & normal stand assembly recommended for use with cylndor asembly suitable for bore well casing pipe |
| 14 | Cost of 32mm dia GT Pipe (Medium)3mtrs long screwed as both ends with seamless socket as per 15:1239(part 1990) |
| 15 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp |
| 16 | Supplying submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages1.5 HP |
| 17 | Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes ,royalty etc all complete job as per direction of E/I. |
| 18 | Supplying fitting and fixing 3 core 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I. |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 20 | 25mm nominal dia pipes |
| 21 | 32 mm nominal outer dia Pipes |
| 22 | Polythene water storage tank of mark with cover and suitable locking system in double layer conforming to IS:12701-1996 with latest revision . |
| 23 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. |
| 24 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 25 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). |
| 26 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
| 27 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 28 | Providing designation 75B work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and specification and direction of E/I. |
| 29 | Providing R.C.C M-200 with nominal mix of (1:1.5:3) slab of desired size with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse send of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes & royalty all complete as per building specification & direction of E/I. |
| 30 | Providing 12mm coment plastar (1-6) with cleen coarse sand of F M 1.5 including scrooning curing with all leads and lifts of water, scaffoliding taxes and roylity all complete as per building specification and dueection of E/I |
| 31 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.With \\"A\\" grade white 15X15cm Tiles. |
| 32 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 33 | Providing Tor steel reinforcement of all R.C.C Work as per approved design and drawing including carriage of M.S. rods (straight or in coils) to work site, cuting, bending and binding with annealed wire the cost of wire removal of rust placing in position, vibrating,striking, curing,(but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. 8mm dia |
| 34 | Providing two coats of snowcem of approved make & shade over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding , curing and taxes etc. all complete as per building specification direction of E/I. |
| 35 | Providing 250mm thick brick jali work in C.M. (1:8) in superstructure with designation 75A brick and approved quality of clean coarse sand of F.M. 2 to 2.5, finished with deep ruled pointing in C.M. (1:3) with sand of F.M. 1.5 on entire surface including the cost of finished the holes, screening carriage of materials, scaffolding, raking out joints to 15 mm depth, curing taxes and royalty all complete, as per approveddesign, building specification and direction of E/I. |
| 36 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 37 | Carriage of materials |
| 38 | stone chips |
| 39 | bricks |
| 40 | Providing and Supplying Iron and steel material |
| 41 | (b) Angle size in mm (i) 50 x 50 x 6/8/10 |
| 42 | (a) plate size in mm(ii) 6 & 7 x 1500 |
| 43 | Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding ( machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I. |
| 44 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.m20 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 45 | Bangla Bhattas Brick of Size (248mmx121mmx70mm) inclusive of royalty but Exclusive of GST.Jhama Bricks. |
| 46 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 47 | 15 mm dia nominal bore CPVC Pipe |
| 48 | 20 mm dia nominal bore CPVC Pipe |
| 49 | Providing and fixing male-ended 15 mm dia Brass Bibcock of approved quality (wt. Not less than 350 gm.) With extra socket all complete as per specification and direction of E/1. |
| 50 | Providing and fixing 15 mm dia male-ended C.I. Stop cock (wt. Not less than 400 gms. ) of approved quality with extra socket all complete as per specification and direction of E/1. |
| 51 | Providing and fixing Gun metal full way valve of approved quality all complete, as per specification and direction of E/I.a) 25 mm dia and weight not less than 500grms- |
| 52 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.a. 75 mm dia. |
| 53 | Provision of GST @18% |
| 54 | Add 1% Labour Cess Please Enable Macros to View BoQ information |
