|
| 1 | Item Wise BoQ BoQ_Ver3.0 Item Wise Normal INR Only INR Select, Excess (+), Less (-) Tender Inviting Authority: Superintending Engineer, Electricity Construction & Work Circle-I, P.V.V.N.L., Meerut Bought Out Name of Work: (1) Construction of 33KV line for feeding 33/11KV Substation Gulauthi No.2, BSR from 132KV S/s Gulauthi BSR (2) Construction of 33KV line for feeding 33/11KV Substation Daulatpur from 220/132KV Substation Rukhi, Syana for Additional Source. Direct Tender Reference No : 11/ECWC-I/MRT/2026-27 Quote for Supply Portion only Bidder Name : Quote for Erection Portion only PRICE BID1. This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns after validating the sheet, else the bidder is liable to be rejected for this tender.2. Bidders are allowed to enter the Bidder Name and Unit Ex-Works Price and GST in %age only.3. All the material and erection practices shall be as per tender specification.5. Above Schedule Structure and quantities is provisional and may vary as per site requirement with due approval.6. Indicative scope of works and quantity of Items/Materials required for above work shall be as per the Price Bid. Any other material if required to complete the job and not mentioned above, shall have to be provided by the bidder without additional cost.7. Financial evaluation and selection of 'L1 Bidder' shall be done on the basis of total amount. The rates received in the tender will be final after the approval of the Competent Authority/Committee and the competent Authority/committee will have the right to negotiate in tender rate/amount.8. Tenderer must be fill-up the enclosed terms & conditions sheet and attached with 1st Part of Tender as well as scanned copy of same will be uploaded on NIC Website alongwith other documents.9. Bidders must be filled up the GST in %age, Otherwise it is assumed G.S.T. rates are included in the given ex-works price (Rs./Unit). NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Works Item Code Tender Qty. Unit Estimated Rate Bought-out/Direct Specify Bought-out/Direct Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Unit Ex-Works Price(Rs./unit) Excise Duty(Rs/Unit) CST/VAT(Rs/Unit) Other Taxes & Duties(Rs/Unit) Freight & Insurance Charges(in Rs./Unit) Unit FOR Dest. Supply Price incl. all Taxes and Duties(in Rs./Unit)(F+G+H+I+J) Total Value for Supply or Erection (In Rs.)(C x F) GST (in Rs.) in %age Total Value for GST (in Rs.) (F*M/100) Total Unit Price incl. GST (in Rs.) Total Amount excl. GST (in Rs.) (4×13) Total Amount incl. GST (in Rs.) (4×26) TOTAL AMOUNT In Words |
| 2 | Supply of following Material M.S.Top Channel 125x65x6mm, 3200 mm long (13.10kg/mt) with M.S.Clamp of 75x10mm size, bolts, nuts and washers for 33KV line double pole/ Four Pole |
| 3 | M.S.Channel 100x50x6 mm, 2400 mm long (9.56kg/mt) with M.S.Clamp of 65x8mm for dropper channel of 33KV line double pole/four pole |
| 4 | M.S.Angle Iron 65x65x6mm, (5.80kg/mt) 4300 mm long bracing with 4 Nos. M.S.Clamps of 65x6mm, bolts, nuts and washers for 33KV line |
| 5 | M.S Guarding angle 65x65x6 mmx2200mm, |
| 6 | Structure for 33 KV Isolator with Plinth & Foundation as per specification i) M.S.Channel (125x65x6)mm 3.5Mtr long for Vertical Structure. |
| 7 | ii) M.S.Angle (75x75x6)mm 2.6Mtr long for Horizental Structure. |
| 8 | iii) M.S.Angle (50x50x6)mm 0.81Mtr long for Bracing. |
| 9 | Supply for cable support Structure (01 Nos.)i) M.S.Channel (100x50x6)mm |
| 10 | ii) M.S.Angle (65x65x6)mm |
| 11 | Carriage of following material from PVVNL store Safe carriage of 9.0 Meter PCC Pole from any stores centres under PVVNL, depending upon the availability of material at Stores Centres, with loading & unloading at both ends respectively. |
| 12 | Safe carriage of 11 meter PCC Pole from any stores centres under PVVNL, depending upon the availability of material at Stores Centres, with loading & unloading at both ends respectively. |
| 13 | Safe carriage of SP-72, 13 meter S.T.Pole from any stores centres under PVVNL, depending upon the availability of material at Stores Centres, with loading & unloading at both ends respectively. |
| 14 | Loading, Safe carriage & unloading of 33KV, 3x300Sq.mm. XLPE Alumn.Cable, from any stores centres under PVVNL, depending upon the availability of material at Stores Centres, with loading & unloading at both ends respectively. |
| 15 | 33KV line isolator |
| 16 | 33KV cross-arm 100x50mm V-type |
| 17 | 33KV Pin insulator Polymeric type |
| 18 | 33KV Disc Fitting 70KN |
| 19 | 33KV Disc Insulator B&S Polymeric Type |
| 20 | A.C.S.R. Dog Conductor |
| 21 | Cable Box O/D 33KV 3x300 XLPE |
| 22 | Complete Stay GI Stay Rod 20x1800 mm, |
| 23 | Stay wire 7/8 SWG, 10 KG, Stay Clamp, Bolt, nut and washer with concrete grouting) |
| 24 | Earthing of Pole by M.S.Earthing Rod 2540x20mm |
| 25 | G.I.Wire 6 No. SWG for Guarding & Earthing Complete |
| 26 | G.I.Wire 8 No. SWG for Guarding |
| 27 | G.I.Wire 16 SWG |
| 28 | Loading, Safe carriage & unloading of heavy stock material (other than pole) from any stores centres under PVVNL, depending upon the availability of material at Stores Centres, with loading & unloading at both ends respectively. |
| 29 | Erection of Following Material & Miscellaneous Electrical Works.The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all M.S.Clamps size of 75x10mm, 'F' bracket 75x10mm, M.S.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required.Single Pole Structures. (a) 11M Long PCC Pole |
| 30 | (c) 13M Long STP-SP-72 Round Pole for single D/Ckt |
| 31 | The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all M.S.Clamps size of 75x10mm, 65x8mm, M.S.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from M.S.Angle 65x65x6mm. The work includes cutting holes and providing M.S.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule.(i) Double Pole Structures(a) 11M Long PCC Pole for Single Ckt. |
| 32 | (b) 13M Long STP-SP-72 Pole for Single Ckt. |
| 33 | (c) 13M Long STP-SP-72 Pole for double Ckt. |
| 34 | End Double Pole Structures(a) 13M Long STP-SP-72 Pole for Double Ckt. |
| 35 | (b) 9.0M Long PCC Pole |
| 36 | Tri Pole Structures(a) 13M Long STP-SP-72 Pole for Double Ckt. |
| 37 | Four Pole Structures(a) 13M Long STP-SP-72 Pole for Double Ckt. |
| 38 | Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per drawing. Work includes back filling and proper ramming. Single Pole Structures. (a) 11M Long PCC Pole |
| 39 | (b) 13M Long STP-SP-72 Round Pole for single D/Ckt |
| 40 | (i) Double Pole Structures(a) 11M Long PCC Pole for Single Ckt. |
| 41 | (b) 13M Long STP-SP-72 Pole for Single Ckt. |
| 42 | (c) 13M Long STP-SP-72 Pole for double Ckt. |
| 43 | End Double Pole Structures(a) 13M Long STP-SP-72 Pole for Single Ckt. |
| 44 | (b) 9.0M Long PCC Pole |
| 45 | Tri Pole Structures(a) 13M Long STP-SP-72 Pole for Double Ckt. |
| 46 | Four Pole Structures(a) 13M Long STP-SP-72 Pole for Double Ckt. |
| 47 | Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc. |
| 48 | Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing, including & fixing of Stay Insulators provided by the contractor for 33KV Line. |
| 49 | Earthing of supports with M.S. Earth Rod of (20x2540)mm long including excavation of pit and driving M.S.Rod 0.3M apart from support and 0.5M below the ground level and connecting belowl the earth electrodes with the help of G.I.wire No.6SWG, G.I.Nut bolt & washer and earthing lugs. |
| 50 | Laying, spreading, lifting and final sagging of 3 phases ACSR Dog conductor in accordance with Line chart includidng binding and fixing of all accessories in 03Nos. Conductor in parallel. |
| 51 | Making Jumpers on Sectional Pole, by providing & fixing of P.G.Clamps of proper sizes, suitable for Dog Conductor/ 33KV, 3x300Sq.mm XLPE cable.(a) Sectional Double Pole |
| 52 | (b) End Double Pole |
| 53 | (d) Tri Pole |
| 54 | (e) Four Pole |
| 55 | Guarding between two poles like single poles, double poles, four poles, etc. to guard L.T., 11KV Line telephone line and river crossing, road crossing etc. with G.I.Wire No.6SWG, G.I.Wire No.8SWG and G.I.Wire No.16SWG including cutting with fabrication and fixing of M.S.Guarding angle 75x75x6mm with Providing & fixing M.S.clamps size 75x10mm, M.S.Turn buckle, M.S.Eye bolt, nut bolts & washer etc, as per drawing. |
| 56 | Providing & fixing of SMC Danger board at each location as per specification of the drawing. Size 200mmx250mm & 3mm thickness with M.S.Clamp & nut & bolt for 33KV |
| 57 | Providing & fixing of SMC Number Plate at each location as per specification of the drawing. Size 200mmx250mm & 3mm thickness with M.S.Clamp & nut & bolt. |
| 58 | Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place. |
| 59 | Making H.T.Connection of the proposed line from 33KV Line. The work consists of fixing & fabrication of Dropper Channels, & fixing of Disc Insulators, Pin Insulators, jumpering with P.G.Clamps, clamping and binding etc,as per site conditions. |
| 60 | Providing & Wrapping of barbed wire (2.0Kg per Pole) on 33KV PCC/ST Poles SP-55/SP-72 as anti-climbing device for a length of 0.9Mtr. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75Mtr. from the ground, complete with providing and fixing of lower end & upper end clamps made of M.S.Flat 40x5mm complete with nuts & bolts. |
| 61 | Painting of following supports/structures of 33KVLine, with two coats of synthetic enamel aluminium paint after one coat of ready mix primer, including cost of all material, as well as rubbing/cleaning of surface as required for proper completion of work:-(a) 13Mtr SP-72 Poles including all channels/x-arms/clamps etc.:(i) Single Supports. |
| 62 | Erection of Following Material & Miscellaneous Electrical Works.33KV Cable support structure. (i) Fabrication and erection of cable support made of two pieces of Channel (100x50x6)mm, 3.0 meter long, joined to each other by means of 5 Nos. Angle (50x6) mm pieces of size 750 mm long each by welding at equal intervals and grouting in a block of size (300x300x700)mm with stone pad. C.C. 1:3:6 (cement, coarse sand and stone ballast) complete and painted of welding joint with one coat of Ready Mixed primer and Two coat of enamel Aluminium paint. Work includes providing of three Nos. G.I. clamps made of (50x6)mm G.I. Flat for holding the cable including nuts and bolts. |
| 63 | (ii) Excavation of earth (0.60Mx0.30Mx1.0M)x1 |
| 64 | (iii) Erection of 33KV cable support structure in proper alignment with stone Pad (Provided by Contractor). |
| 65 | (iv) Grouting of size (0.60Mx0.30Mx1.0M) with C.C. in ratio 1:3:6 (cement, sand, 20mm Stone grift)x1 |
| 66 | LINE/BUS ISOLATOR STRUCTURE: (1Nos.) i) Fabrication of Structure, including cutting, straightening & drilling of holes in Channel/Angle and Erection of Line/Bus Isolator structure in proper alighment. |
| 67 | ii) Excavation of earth-2x(1.10x0.60x1.0)x1 and Grouting of structure in C.C. ratio 1:3:6 in size 2x(1.10x0.60x1.00)x1 by fixing 04 Nos. stone Pad. |
| 68 | iii) Making plinth by C.C. ratio 1:3:6, in size 2x(1.10x0.60x0.30)x1 |
| 69 | iv) 12mm thick plastering on plinth in ratio 1:4 of size- 2x(1.10x0.30)x2+2x(0.60x0.30)x2+2x(1.10x0.60)x1 |
| 70 | v) Installation of 33 KV Isolators:Assembling and installation of line/Bus Isolator on the isolator structure. Adjusting of operating mechanism in proper alignment so as to ensure smooth operation of the same. In case of Line Isolator proper operation of earth links shall also be ensured. The work includes fabrication for proper fixing if required. |
| 71 | 33KV 3x300SQ.M.M XLPE Cable laying after Digging of trench of size (750x1050)mm with sand & Brick in open cut. |
| 72 | Providing & Laying of Ist Class Bricks, along the length on both side of 33KV XLPE Cable in Cable Trench and Stone Slab of size 450x450x35mm on top of the Cable, Providing 75mm thickness River sand for cushion beneath and 75mm above the cable as per specification. |
| 73 | Back filling of excavated earth in the cable trench upto the ground level and ramming properly. |
| 74 | Supply and laying of HDPE Pipe PE-80, PN-6, DN-160mm dia Pipe for laying of 33KV, 3x300Sq.mm, XLPE Cable with HDD (trenchless) method including cable laying. |
| 75 | Laying of 33KV, 3x300Sq.mm XLPE Cable in the air on cable Riser Double Pole, existing trench cable trench, nala x-ing & G.I.Pipe and making connection with 33KV over head line at both ends. |
| 76 | Providing and fixing 150mm dia 2mm thick 3M long G.I.Pipe over 33KV, 3x300Sq.mm XLPE Cable before mounting the 2No. Cable on double pole / 2M long for cable support structure. Work includes providing & fixing of Clamp, sealing of top and bottom end of the G.I.Pipe. One end of G.I.Pipe is to be buried under earth about 500mm.a). 3Mtr long for double Pole & Cable Riser. |
| 77 | Making of 33KV Outdoor type cable end termination by heat shrinkable XLPE Cable Jointing Kits and crimping with proper size aluminium lugs. Work includes providing Aluminum lugs, insulating tapes etc as per specifications. |
| 78 | Supply & fixing of cable route marker along the route of 33KV cable with proper grouted with proper painting & marking PVVNL, 33KV HT Cable. |
| 79 | Supply & fixing of stone pad (300x300x75mm) for Pole grouting |
| 80 | Road restoration charges for 1Mtr wide Kuccha Road-Pucca Road (Inter locking Tiles, Bricks Road (Cemented, Concrete & Black road only) & Developed green belt only) or Deposite charges to take the permission/approval/NOC from any Development Authority/Govt. Body/Forest Deptt./and other concerned Deptt. for construction of 33KV line(a) 1Mtr wide Kuccha Road |
| 81 | (b) 1Mtr wide Pucca Road |
| 82 | Cartage of empty cable drum from site to PVVNL store including loading & unloading at both ends respectively. |
| 83 | Old Material received back from site ACSR Dog old Conductor Scrap |
| 84 | M.S.Scrap of old damaged Pole / V-type Cross Arm. |
| 85 | Removing of Existing single Pole structure 9M, PCC single ckt 33KV line for making new line. |
| 86 | Removing of existing single Pole structure 11M, STP single ckt 33KV line for making new line. |
| 87 | Removing of existing End Pole structure 9M, PCC single ckt 33KV line for making new line. |
| 88 | Removing of existing End Pole structure 11M, STP single ckt 33KV line for making new line. |
| 89 | Removing of existing Double Pole structure 9M, PCC single ckt 33KV line for making new line. |
| 90 | Removing of existing double Pole structure 11M, STP single ckt 33KV line for making new line. |
| 91 | Removing of existing Four Pole structure 9M, PCC single ckt 33KV line for making new line. |
| 92 | Removing of existing Tri Pole structure on Rail single ckt 33KV line for making new line. |
| 93 | Removal & Diamantling charges of damaged ACSR Dog Conductor from 33KV line & Making the bundles of removed conductors. |
| 94 | Safe carriage of old received back material from site to store including loading & unloading at both end. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select % 0.0 0.0 Zero Only Quoted Rate in Words Zero Only Please Enable Macros to View BoQ information |
