|
| 1 | Supplying & replacement of Electric driven Storm Water Pump consisting of following, complete in all respects, as required: (B) Horizontal type, multistage, centrifugal Sewage handling non clog water pump set suitable for mixed flow having capacity to give discharge of 1500m³/hr, head 10m, 1480 RPM split casing pump of cast iron body & Cast iron impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable for existing Squirrel cage induction motor, TEFC & Suitable cement concrete foundation duly plastered with anti vibration pads. |
| 2 | Disconnection of the existing Suction Pipe line upto 300-400 mm día with the help of chain pulley block and cleaning the silt, waste material etc of the same along with dismantling of NRV/Valve and repairing the same after replacement of Packing sheet and lowering after refixing the same with pumpset i/c testing and commissioning etc as required. |
| 3 | Supplying, fixing, testing & commissioning of double langed sluice valve of rating PN 1.0 with non rising spindle, C.I. metal Bronze Body seat Ring, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required: |
| 4 | 150mm dia |
| 5 | 350 mm dia (PN-1.0) |
| 6 | 400 mm dia (PN-1.0) |
| 7 | Providing, installation, testing and commissioning of non-return valve flanged end of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required: |
| 8 | 150 mm dia (PN-1.6) |
| 9 | 350 mm dia (PN-1.6) |
| 10 | 400 mm dia (PN-1.6) |
| 11 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class II of IS: 3589 including Welding, fittings like elbows, tees, flariges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: |
| 12 | 150 mm dia. |
| 13 | 350 mm dia (wall thickness 7.0 mm) |
| 14 | 400 mm dia (Wall Thickness 7.0 mm) |
| 15 | Disconnection of the existing Suction Pipe line upto 150250 mm dia with the help of chain pulley block and cleaning the silt, waste material etc of the same along with dismantling of NRV/Valve and repairing the same after replacement of Packing sheet and lowering after refixing the same with pumpset i/c testing and commissioning etc as required. |
| 16 | Repairing of 25/40/50/75/100/125 HP Star/Delta Panel including replacement of worn/burnt out control wiring of contactors, relay, timer with new suitable copper wire, thimbles etc complete testing on load by transfer from star to delta and replacement of following accesories etc complete as reqd. |
| 17 | ML-6 Heavy Duty 3 pole Contactor with 2NO+2NC Aux contact with suitable size Aluminium cable |
| 18 | Electronic Timer 03 sec to 30 sec Star/Delta- 1 C/O + 1 C/O |
| 19 | LED Indicating Light RYB 240 Volts |
| 20 | 0-500 V Digital Volt Meter |
| 21 | 0-400 A Digital Ampere Meter |
| 22 | Push Button ON/OFF alongwith NO/NC |
| 23 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. |
| 24 | 200 A 25,ΚΑ, ТРМССВ |
| 25 | 250 Λ, 25 ΚΑ, ТРМССВ |
| 26 | Credit for dismantle materials |
| 27 | MS Pipe of 150mm, 350mm &400mm Size (Rusted) |
| 28 | NRV 150mm (Rusted) |
| 29 | NRV 350mm Size (Rusted) |
| 30 | NRV 400mm Size (Rusted) |
| 31 | Sluice Valve 150mm Size (Rusted) |
| 32 | Sluice Valve 350mm Size (Rusted) |
| 33 | Sluice Valve 400mm Size (Rusted) |
| 34 | L-6 Heavy Duty 3 pole Contactor |
| 35 | Electronic Timer 03 sec to 30 sec Star/Delta- 1 C/O + 1 C/O |
| 36 | LED Indicating Light RYB 240 Volts |
| 37 | 0-500 V Digital Volt Meter |
| 38 | 0-400 A Digital Ampere Meter |
| 39 | Push Button ON/OFF alongwith NO/NC Please Enable Macros to View BoQ information |
