|
| 1 | Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed. |
| 2 | Demolition of RCC column at any position and not specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for steel members of fence, gate etc complete all as specified and as directed. |
| 4 | Earth work in excavation in ordinary rock by mechanical means (Hydraulic excavator) in foundation trenches not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated material and disposal of surplus excavated material as directed within a lead of 50 m complete all as specified and as directed. |
| 5 | All as per item No 04 described here-in-before but for depth exceeding 1.5 m and not exceeding 3.00 m for ordinary rock complete all as specified and as directed. |
| 6 | Removing excavated material to distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above starting point in ordinary rock complete all as specified and as directed. |
| 7 | Returning filling in excavated earth work including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in ordinary rock complete all as specified and as directed. |
| 8 | Material and labour for Plain Cement Concrete 1:4:8, type D-2, using 40mm graded stone aggregate as in foundation, mass concrete etc complete all as specified and as directed. |
| 9 | Material and Labour for reinforced cement concrete M-30 grade Design mix with using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and as directedNote : Necessary formwork and reinforcement shall be measured and paid seperately. |
| 10 | Material and Labour for reinforced cement concrete M-30 grade Design mix with using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directedNote : Necessary formwork and reinforcement shall be measured and paid seperately. |
| 11 | Material and labour for steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished concrete surfaces complete all as specified and as directed. |
| 12 | Material and labour for steel formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed. |
| 13 | Material and labour TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 14 | Material and labour TMT Mild steel bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 15 | Material and labour for precast cement concrete block masonry with solid blocks made out of PCC 1:3:6, type C-1 with using 20mm graded stone aggregate, exceeding 10cm in width and setting in cement mortar 1:6 etc complete all as specified and as directed. |
| 16 | Material and labour for Plain Cement Concrete 1:2:4, type B-0, using 12.5 mm graded stone for coping including weathering slightly round or champhered angles and throating including necessary formwork complete all as specified and as directed. |
| 17 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed. |
| 18 | Material and labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed |
| 19 | Material & labour for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 20 | Supply and fix mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Grade E-165 complete all as specified and as directed. |
| 21 | Supply and fix mild steel sections for joist, channel, angle or tee sections, post, etc fixed independently, without connecting plates, etc (cut to ordinary lengths i.e within 20mm of the length indicated) conforming to Fe 410-W (gde-E-250) quality A etc complete all as specified and as directed. |
| 22 | Supply and fix rolled sections as in main and cross beams,hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe-410 (Gde E- 250) quality A complete all as specified and as directed |
| 23 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 24 | Material and labour for galvanised two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. ( Note: Each line wire to be measured seperately) |
| 25 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/ on Chajjas, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed. Please Enable Macros to View BoQ information |
