|
| 1 | Carriage of following material from store center to site of work including loading & unloading at both ends maximum distance up to 60 Km. :- |
| 2 | PCC Pole 11 Mtr. Long |
| 3 | PCC Pole 8.5 mtr long |
| 4 | ACSR Weasal Conductor |
| 5 | 11 KV Cross Arms With Clamps |
| 6 | 11 KV Pin Insulator with pin |
| 7 | 11 KV Disc Insulator with fitting |
| 8 | 11 KV Pin insulator (Polymeric) |
| 9 | LT AB Cable of size 3x120 sq.mm |
| 10 | LT AB Cable of size 3x95 sq.mm |
| 11 | LT PVC Cable 4x16 sq mm |
| 12 | LT PVC Cable AL 1x240 sq mm |
| 13 | LT PVC Cable of size 1x400 sq.mm |
| 14 | LT PVC Cable of size 3.5x150 sq.mm |
| 15 | Above 100 KVA To 250 KVA T/F 11/0.4V |
| 16 | 100 KVA T/F 11/0.4V |
| 17 | 11 KV Fuse set |
| 18 | Stay set Complete 16x1800 |
| 19 | Earthing rod with GI wire (5 Mtr. Each) |
| 20 | LT Distribution Box |
| 21 | Errection PCC Pole 11 mtr long/PCC pole 8.5 mtr long after digging a pit of size 1.6 mtr deep in all type of Soil including grouting ratio (1:4:8) of the pole with proper ramming after completion of work. |
| 22 | Errection of Double PCC Pole 11 mtr long/PCC pole 8.5 mtr long after digging a pit of size 1.20x0.60x1.6 mtr in all type of Soil for each pole including grouting ratio (1:4:8) of the pole with proper ramming after completion of work. |
| 23 | Laying, lifting sagging of LT AB Cable of size 3x120. |
| 24 | Laying, lifting sagging of LT AB Cable of size 3x95. |
| 25 | Laying of ACSR Weasal Conductor |
| 26 | Laying of LT PVC Cable of size 4x16,3.5x150/70,3.5x400 & 1x250 sq.mm. with complete work as per respo |
| 27 | Erection fixing & grouting of stay rod size 16X1800mm after digging the pit of size 0.60X0.30X0.30 meter in ratio 1:4:8 including fixing of stay wire clamp and nuzzling at the both ends. |
| 28 | Fixing of MS Earthing of each 11 KV line and pole after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GI wire. |
| 29 | Fixing of 11 KV Pin Insulator with pin |
| 30 | Fixing of 11 KV Disc Insulator with fitting |
| 31 | Making of New 250 KVA T/F Plinth of size 6'x6'x3' (feet) as per respo |
| 32 | New Wiremesh Fencing of 250 KVA T/F with saprate gate and grouting of legs |
| 33 | Water level earthing of 250 KVA T/F as per respo |
| 34 | Safe placing of 250 KVA T/f on newly constructed plinth alongwith connection properly and proper jumpering of HT side and fixing of cable on LT side of T/f |
| 35 | Mounting of 100 KVA T/f with proper jumpering of HT side and fixing of cable on LT side of T/f on double pole |
| 36 | Fixing of 11 KV Fuse Set. |
| 37 | Fixing of Junction Box & making connection & other related works. |
| 38 | Providing and fixing of LT Fuse Box with fuse wire of appropriate size |
| 39 | Providing and Fixing of Alum. Leg long barrel of various size |
| 40 | Providing and Fixing of Lead for connection of LT Distribution box |
| 41 | Providing and fixing of Stone Pad |
| 42 | Providing and fixing of Double circuit Tailless Unit Complete with Appropriate Rating Fuse strip/Fuse Set |
| 43 | Providing and fixing of Danger Board with barbed wire including jumper |
| 44 | Providing and fixing Suspension Clamp and J-Hook |
| 45 | Providing and fixing Dead end Clamp with I hook |
| 46 | Providing and fixing of Copper L-piece 50x225x10mm (LS) |
| 47 | Providing and fixing of Copper L-piece 62x225x12mm (LS) |
| 48 | Grouting of poles Complete with cement concrete as per RESPO Norms |
| 49 | Providing and Fixing MS Channel (Dropper) 100x50x2028mm (for fuse set) |
| 50 | Providing and Fixing MS angle 75x75x6x2028mm with clamp & bolt and nut (T/F base) |
| 51 | Providing and Fixing MS Top channel (125x65x2240mm) |
| 52 | Providing and Fixing MS Channel 125x65x1300mm (T-off) |
| 53 | Cutting & Chopping of tree branches. |
| 54 | Disconnecting the Cable of existing consumers from LT Line and reconnection the cable of existing consumers after completion the work of replacement of damaged conductor etc. |
| 55 | Providing and Fixing of various size of LT & 11 KV Clamps with nut and bolt |
| 56 | Providing and Fixing of various size of Shackle Insulator with nut and bolt |
| 57 | Providing and Fixing of various size of Double Pole Clamp with nut and bolt |
| 58 | Providing & fixing of stay clamp for PCC Pole/STP made of MS flat of size 50X6 mm complete in all respect. |
| 59 | Providing & fixing of Stay insulator in stay wire as per site requirement. |
| 60 | Providing and fixing Al Leg long barrel off size (LS) |
| 61 | Fabrication of cross Arm from given M.S channel for making fuse set complete in all respect. |
| 62 | Providing and Fixing of LT Piercing connector of various sizes complete in all respect. |
| 63 | Back Cartage of 100 KVA T/f (old & used) site to Store Centre Meerut |
| 64 | Back Cartage of above 100 KVA T/f (old & used) site to Store Centre Meerut Please Enable Macros to View BoQ information |
