|
| 1 | Safe Carriage of following material from store center PVVNL to site & vice-versa of work including loading & unloading at both ends maximum distance up to 100 Km. :- (Part-1) |
| 2 | 250 KVA T/F 11/0.4 KV |
| 3 | 11 KV Fuse Set |
| 4 | LT PVC Cable Al 1x240 sq.mm |
| 5 | 11 KV TPMO |
| 6 | ACSR WEASAL CONDUCTOR |
| 7 | PCC POLE 8.5 LONG |
| 8 | 11 KV PIN INSULATOR WITH FITTING |
| 9 | 11 KV DISC INSULATOR WITH FITTING |
| 10 | Errection PCC Pole 11 mtr long/PCC pole 8.5 mtr long after digging a pit of size 1.6 mtr deep in all type of Soil including grouting ratio (1:4:8) of the pole with proper ramming after completion of work. |
| 11 | Fixing of 11 KV TPMO |
| 12 | 11 KV PIN INSULATOR WITH FITTING |
| 13 | 11 KV DISC INSULATOR WITH FITTING |
| 14 | providing and fixing 11 KV TPMO |
| 15 | Fixing of LT PVC Cable Al 1x240 sq.mm |
| 16 | Fixing of 11 KV Fuse Set |
| 17 | Construction of New 250 KVA T/F Plinth of size 6'x6'x3' (feet) |
| 18 | Providing and Fixing of Wiremesh Fencing of 250 KVA T/F |
| 19 | Water level earthing of 250 KVA T/F |
| 20 | Providing and Fixing of Danger board barbed wire including jumper |
| 21 | Providing and Fixing of Copper L-piece 50x225x10mm (LS) |
| 22 | Providing and Fixing of Copper L-piece 62x225x12mm (LS) |
| 23 | Providing and Fixing of Al Lug long barrel off size (LS) |
| 24 | Back Cartage 100 KVA T/F (Old and Used) Site to Store Centre, Meerut |
| 25 | Laying, lifting of ACSR Weasal Contcutor |
| 26 | Safe Carriage of following material from store center PVVNL to site & vice-versa of work including loading & unloading at both ends maximum distance up to 100 Km. :- (Part-2 Additional T/F) |
| 27 | PCC Pole 8.5 mtr long |
| 28 | ACSR Weasal Conductor |
| 29 | 11 KV Pin Insulator with nut and bolt |
| 30 | 11 KV Disc Insulator with nut and bolt |
| 31 | LT AB Cable 3x95 sq.mm |
| 32 | 250 KVA T/F 11/0.4V |
| 33 | 100 KVA T/F 11/0.4V |
| 34 | 11 KV Fuse set |
| 35 | Stay set |
| 36 | Earthing rod |
| 37 | Errection PCC Pole 11 mtr long/PCC pole 8.5 mtr long after digging a pit of size 1.6 mtr deep in all type of Soil including grouting ratio (1:4:8) of the pole with proper ramming after completion of work. |
| 38 | Errection of Double PCC Pole 11 mtr long after digging a pit of size 1.20x0.60x1.6 mtr in all type of Soil for each pole including grouting ratio (1:4:8) of the pole with proper ramming after completion of work. |
| 39 | Laying, lifting of LT AB Cable 3x95. |
| 40 | Laying of ACSR Weasal Conductor for jumpering. |
| 41 | Fixing of Stay rod complete as per norms. |
| 42 | Fixing of MS Earthing of each 11 KV line and pole after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GI wire. |
| 43 | Providing and Fixing of MS Nut and Bolts. |
| 44 | Providing and Fixing Clamp with nut and bolt |
| 45 | Providing and Fixing 2\\" dia GI Pipe upto 80 feet Water level earthing 250 KVA T/F (Neutral and Body) |
| 46 | Providing and fixing chemical earthing of 100 KVA T/F |
| 47 | Making of New 250 KVA T/F Plinth of size 6'x6'x3' (feet) |
| 48 | New Wiremesh Fencing of 250 KVA T/F. |
| 49 | Providing & Fixing of Dropper Channel. |
| 50 | Fixing of 11 KV Fuse Set. |
| 51 | Providing & Fixing of Top channel. |
| 52 | Providing & Fixing of T-off channel. |
| 53 | Providing & MS Angle 65x65x6 mm |
| 54 | Providing and Fixing of Piercing Clamp. |
| 55 | Providing and Fixing of Suspension Clamp. |
| 56 | Providing and Fixing of Dead and Clamp |
| 57 | Grouting of PCC Pole /PCC Pole |
| 58 | Providing and fixing of Stone Pad |
| 59 | Providing and fixing of LT Fuse BOX |
| 60 | Fixing of Distribution box one phase/three phase |
| 61 | Providing and fixing of Danger Board |
| 62 | Providing and fixing of Copper L-piece 62x225x12mm (LS) |
| 63 | Providing Red Oxide Paint |
| 64 | Providing Aluminium Paint |
| 65 | Providing & intallation of LT Protection Unit/Tailess units for single circuit containing 06 No. incoming/outgoing studs of 500 Amp/650 volts a made out of copper and Rod made of brass along with 01 Neutral made of brass & 03 back entry made of brass & having 07 LT porcelain insulator fixed in holding clamp made of M.S strip. As per drawing. |
| 66 | Providing & Fixing of frame made of angle of size 50x5 mm with the help of Nut & Bolts off size. |
| 67 | Providing & fixing of copper fuse strip. |
| 68 | Providing & fixing of Al. Crimping Lugs 630 sqmm. |
| 69 | connecting of LT XLPE |
| 70 | Grouting of Frame in plinth Please Enable Macros to View BoQ information |
