|
| 1 | Safe carriage of the following Centralised material from any Store Centre of PVVNL/Baghpat/Baraut to work site /JE store with loading & unloading at both ends respectively. |
| 2 | 11kv XLPE Cable 3x300 |
| 3 | 11kv XLPE Cable Jointing kit 3x300 o/D |
| 4 | 11 kv VCB Outgoing 200/100/5A 350 MVA |
| 5 | Proper Installation/Fabrication/laying/fixing/binding etc. of the above and Following Centralised Material With proper connection including All the Accessories and complete work in all respect (as per resspo norms and site requirement) (All work in the Contractor Scope with Carriage of material to different work site including loading & unloading at both ends respectively). |
| 6 | Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for 11KV 3x300 XLPE Cable at site and Laying of 11KV 3x300 XLPE Cable by open cut method with brick, sand & tali with complete work in all respects as per RESPO norms and laying of 11KV 3x300 XLPE Cableand pulling through thrench with Hi port test with loop & riser as per work site requirement and complete work in all respects. 02 Nos. Different Sites. |
| 7 | Laying of 11KV 3x300 XLPE Cable Cable in Air by Hoisting of cable on double pole structure through GI pipe 6 inch dia 3 mtr long fixed on pole structure including its jumpering complete with clamps, bolts and nuts. 02 Nos. Different Sites. |
| 8 | Making and commissioning of O/D 11 KV 3x300 sqmm J/kit with proper connections and complete work in all respect as per different work site. |
| 9 | Installation and Commissioning of 11 kv VCB Outgoing 200/100/5A 350 MVA with proper connections and complete work in all respect as per site requirement. |
| 10 | Provinding of Best Quality Material And Installation/Fixing of the Following Material and complete Work in all respect with including all the Accessories with carriage and loading & unloading at both ends respectively at work site (Work shall done as per RESSPO norms and Material shall be PVVNL GTP Approved and Specifications) (All Material and Work in the Contractor Scope). |
| 11 | Water Level Earthing :Water level earthing by Boring and lowering of G.I. pipe size 40 mm dia & thickness 3mm into the ground at 20 Mtr depth or upto the water level with the lower end of solid copper cone Approx 225 mm long and 750 gm in weight shall be provided and screwed in pipe as well as bringing out a continuous copper wire 6 SWG from the cone up to the ground surface where it will be bolted to the G.I. earth Strip for Transformer neutral connection, the G.I.Earth strip size 50x6mm will be welded to the G.I. pipe and neutral earthing support & other installed equipment in switchyard. |
| 12 | Tree cutting in way of LT/HT Line at different work sites with safe carriage of all scraps like braches, leafs etc. to dumping ground from worksite with loading and unloading both sides respectively. |
| 13 | Road Restoration at kaccha/Pakka Road as per Norms at Different work sites as per requirement. |
| 14 | Dismentaling and received back of the below following Old, Used and Other Damaged Material from different work site and Safe Carriage of its from different work sites to any Store Centre of PVVNL Discom with loading & unloading at both ends respectively as per norms. |
| 15 | Dismentaling and safe carriage of Old, used and Damaged 11 kv INCOMING/Outgoing VCB from Different Work Sites. |
| 16 | Dismentaling and Safe Carriage of Other Old, Used, Damaged and Scrap Material from different work sites. Please Enable Macros to View BoQ information |
