|
| 1 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR E-1.1 (A) short poing (upt 3 mtr.) (E-1.1.1) |
| 2 | (B) Medium point (Upto 6.0 Mtr.)(E-1.1.2) |
| 3 | (C) Long point (Upto to 10.0 Mtr.)(E-1.1.3) |
| 4 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 2 x 2.5 sq. mm. + 1x1.5sqmm (E- 4.1.7) |
| 5 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. (E- 4.1.14) |
| 6 | 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. (E- 4.1.19) |
| 7 | Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked ( IS:9537 P - II ) rigid steel conduit & it's ISI marked (IS:14768 P-II 2003) accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, pvc bushes, check nuts, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR On board (E-2.3.1) |
| 8 | Providing and fixing of power plug point with non modular accessories as per PWD specification for electrical Works with Galvanized box of 1.2 mm thick with earth terminal with suitable size phenolic laminated sheet (IS : 2036 - 1995) cover including cost of 16 amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outlet making connection , testing , etc. as required. . For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure 'A' attached with this BSR (E- 7.37) |
| 9 | Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . (E-14.1) |
| 10 | Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu purity purity >95% thimble etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 10 SWG G.I. ( Hot Dipped ) Wire (E- 14.6.9) |
| 11 | Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 5 step fan regulator 2 Module 360 dgree rotating (E- 7.29.1) |
| 12 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 25 mm (E- 1.4.2) |
| 13 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Single pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating (E- 6.1.1.2) |
| 14 | Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 8 Way (8+2) (E- 6.10.1.3) |
| 15 | Providing & Fixing of 240/415 V isolator ISI marked IS:13947-III/conforming to IEC 60947-3, suitable for AC22A utilization category, 4KV impulse withstand voltage, true contact indication, Red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. IP 20 contact protection and fitted in existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Double pole isolator 30/40A rating (E-6.2.1.2) |
| 16 | Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. system lumen efficacy ≥ 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.≥0.95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .1200mm , Min. Lumens output 2000 lm LED Tube rod with Polycarbonate Housing(E 17.2.2) |
| 17 | Providing & Fixing of IP20, 2'x2' LED Surface/ Recessed mounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . Recessed Mounting Minimum lumen output 3000 lm (E-17.4.1.1) |
| 18 | Supply , Installation, Testing and Comissioning of Inverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and 50 hz , single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 2.0 TR ISEER not less then 4.6 (E- 22.24.8) |
| 19 | Supply, Fixing and testing of following capacity ISO certified company made wall mounted stabilizer having output voltage variation from 200 V to 250 V(+/-5%) with input voltage variation from 170 V to 260 V, time delay facility from 2 to 4 minute and high cutoff at 270 V with providing of 16 Amp /20 Amp Industrial plug top making connection etc complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 5 kVA (E-22.41.3) |
| 20 | Supply & fixing MS powder coated stand suitable for 1.0/1.5/ 2.0 Tr outdoor type of Split AC. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Ann \\"A\\" attached with this BSR .(E-22.45) |
| 21 | Providing and fixing 14 mm thick Acoustical with fine fissured tiles/ Mineral fibre high density tiles with butt edges false ceiling tiles of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge. ( The tiles should of 90 % RH avg. NCR 0.55 light reflectance> 80% thermal conductiveity K = 0.052-0.057 w/m K colour white. Fire performance class 0/class I(BS 476) with warranty against sag) ( B-10.28 ) |
| 22 | Providing and fixing vertical Blinds, headrail shall be oriented aluminum alloy 50 mm wide x 18 mm high the thickness shall be 1.2 mm. Control unit shall be made of high grade polymer and shall be housed in side the headrail, which shall transfer motion from chain tilter to tilt rod. Chain tilter shall be made of plastic bead of diameter 4.5 mm through which 2 mm thick polyester code passes. Tilt rod shall be extruded aluminum having 3 key ways. Runner shall be moulded plastic and shall have to plastic wheels mounted on plastic axles to enable runner to slide unhindered in headrail. Luver shall be made of fabric 100 mm colour fast and shall have protective scotchgard coating to resist stains and dust. Bottom mechanism consist bottom weight made of powder coated galvanized steel for maximum corrosion resistance. The bottom weight shall be attached with bottom. (B-16.12) |
| 23 | Providing, supplying & fixing of Electrostatic Discharge (ESD) Revolving Chair having ergonomically designed cushioned seat and backrest with conductive / anti-static polyurethane foam cushioning, upholstered in ESD-safe, flame-resistant and metal-free fabric of approved colour and shade, complete with adjustable backrest inclination, lumbar support, pneumatic seat height adjustment and smooth 360° swivel mechanism. Chair shall be provided with ESD-safe armrests, heavy-duty conductive five-star base of polished aluminium / chrome-plated steel fitted with conductive twin-wheel castors for safe discharge of static electricity to ground, all conforming to IEC 61340-5-1 / equivalent ESD standards. The chair shall have approximate overall dimensions of 650 mm (W) × 650 mm (D) × 1100–1250 mm (H), seat size not less than 480 mm (W) × 450 mm (D), adjustable seat height from 450 mm to 550 mm and backrest height not less than 550 mm, complete including supplying, assembling, testing, placing in position at site and all incidental works as directed by the Engineer-in-Charge. |
| 24 | Providing, supplying and fixing of Revolving Chair (V5) having overall size approximately 650 mm (W) × 650 mm (D) × 1100–1250 mm (H), with adjustable seat height, cushioned seat and back upholstered in approved fabric / mesh / leatherette finish, ergonomically designed back support, pneumatic gas lift mechanism, centre tilt / synchro tilt mechanism with locking arrangement, fixed / adjustable armrests, heavy duty nylon / metal five-legged base with castor wheels, complete in all respects suitable for office use, including delivery at site, assembly and placing in position complete as per approved specifications and as directed by Engineer-in-Charge. |
| 25 | Providing, supplying & fixing of visitor / side chair with heavy-duty powder-coated / chrome-finished steel frame of approved section and design, upholstered cushioned seat and back with high-density foam and approved fabric / leatherette of approved colour and shade,with fied armrests, complete with anti-skid base supports and fixed type structure suitable for office reception, waiting and conference areas, having approximate overall dimensions of 560 mm (W) × 600 mm (D) × 850 mm (H), including delivery at site, assembly and placing in position complete as directed by Engineer-in-Charge. |
| 26 | Providing, supplying, installation, testing & commissioning of delegate conference discussion unit of approved make equivalent to Bosch / Sony / TOA / Ahuja consisting of flush-mount / table-top type housing with minimum 380 mm long flexible gooseneck condenser microphone having LED ring indication, built-in loudspeaker of minimum 1 W rated output, request-to-speak / push-to-talk switch with LED status indication, suitable for digital / analog conference discussion system and electrically compatible for daisy-chain connection with central control unit, complete with interconnecting cables having moulded connectors of required length, interface accessories, mounting arrangement, fixing on / in conference table, making all electrical and signal connections, testing, commissioning and satisfactory operation of complete system as directed by Engineer-in-Charge. |
| 27 | Providing, supplying, installation, testing & commissioning of chairman / president conference discussion unit of approved make equivalent to Bosch / Sony / TOA / Ahuja consisting of table-top / flush-mount type housing complete with minimum 380 mm long flexible gooseneck condenser microphone having LED ring indication, built-in loudspeaker, priority override / chairman control push button for simultaneous temporary muting of all delegate discussion units, microphone ON/OFF and status indication LEDs, suitable for digital / analog conference discussion system and electrically compatible with central control unit and all delegate units, complete with interconnecting cables having moulded connectors of required length, mounting arrangement, fixing on / in conference table, making all electrical and signal connections, testing, commissioning and satisfactory operation of complete system as directed by Engineer-in-Charge. |
| 28 | Providing, supplying & fixing of digital conference central control unit suitable for wired digital discussion / conference system having minimum 25 Nos. discussion unit capacity with provision for future expansion, in-built digital audio signal processing (DSP), automatic microphone mixing facility, balanced XLR line level audio outputs, microphone priority and discussion control functions, compatible with all connected chairman / president and delegate discussion units, housed in 19 inch rack mountable metal cabinet complete with rack mounting accessories, built-in mains power supply unit with overload, short-circuit and surge protection, including all required inter-connecting cables, connectors, power cords, termination, making all electrical and audio connections, testing, commissioning and satisfactory operation of complete conference system as directed by Engineer-in-Charge. |
| 29 | Providing, supplying & fixing of digital mixer power amplifier equivalent to TOA / Yamaha / Bosch / Ahuja Digital 100V Line Mixer Amplifier 120W having minimum 120 W RMS continuous rated output power at 100 V constant voltage line, frequency response 50 Hz to 20 kHz (±3 dB), total harmonic distortion (THD) less than 1 % at 1 kHz, with minimum 3 No. balanced microphone inputs through XLR / phone jack and 2 No. unbalanced AUX inputs through RCA connectors, independent input volume controls, master volume control, bass and treble tone controls, microphone priority / muting function, built-in phantom power supply for condenser microphone, balanced floating speaker output suitable for 100 V line speaker system, recording output through RCA connector, built-in current limiter, short-circuit protection and thermal overload protection, complete in 19 inch rack mountable steel housing with rack mounting hardware, inter-connecting signal cables, mains power cable, all accessories required for complete installation, making all connections, testing and commissioning complete as directed by Engineer-in-Charge. |
| 30 | Providing, supplying, wiring, installation, testing & commissioning of 100 Volt line flush mounting ceiling speaker of approved make such as TOA / Bosch / Honeywell / Ahuja / equivalent, having minimum 6 Watt to 9 Watt rated power output, two-way speaker design with built-in line matching transformer and multi-tap selector suitable for 100 V PA system operation, minimum sensitivity 88 dB (1 W / 1 m), frequency response 80 Hz to 18 kHz or better, complete with white powder coated steel / aluminium grille, ABS / metal body with matching back can / enclosure, suitable for recessed mounting in false ceiling. The work shall include providing and laying minimum 2 x 1.5 sq.mm ISI marked FRLS copper speaker cable in heavy duty ISI marked PVC conduit / casing-capping including all accessories such as saddles, bends, junction boxes, draw boxes etc. complete, cutting and making required openings in false ceiling, fixing of speaker with spring clamps / mounting brackets, dressing and termination of cables, making all required interconnections with amplifier / PA system, earthing wherever required, testing, commissioning and satisfactory operation of complete system as directed by Engineer-in-Charge. |
| 31 | Providing & laying of all associated cabling for audio conferencing and public address system including minimum 1.5 sq.mm twin parallel speaker cable of ISI marked / IS / ISO 9001 certified make, multi-core shielded microphone / control cable of approved make, 100 V line distribution cable, all drawn in ISI marked PVC conduit of adequate size or in approved cable tray / trunking as directed by Engineer-in-Charge, including all conduit, cable tray / trunking, saddles, clamps and supports, cable connectors and terminations, numbering ferrules, cable ties, labelling of all cables at both ends, 19 inch equipment rack internal wiring, dressing and management, system integration of all audio components, testing and commissioning of complete audio conference and PA system complete as directed by Engineer-in-Charge. |
| 32 | Providing, supplying, installation, testing & commissioning of PTZ (Pan-Tilt-Zoom) video conferencing camera of minimum 4K Ultra HD resolution with motorized pan, tilt & zoom functions, minimum 12X / 20X optical zoom, auto focus, auto framing / speaker tracking facility, USB 3.0 / HDMI / LAN connectivity, compatible with Zoom / Microsoft Teams / Google Meet / Webex platforms, complete with remote controller, wall / ceiling / table mounting arrangement, necessary brackets, power supply unit, interconnecting cables, all accessories required for complete operation, making all connections, testing and commissioning as directed by Engineer-in-Charge. |
| 33 | Providing, supplying, installation, testing & commissioning of LCD / 3LCD installation type projector equivalent to Sony / Epson / BenQ having minimum 4000 ANSI lumens rated brightness, native WUXGA resolution (1920 × 1200), contrast ratio minimum 2500 : 1, lamp life minimum 3000 hours in normal mode and 4000 hours in eco mode, suitable for conference hall / training room applications, with minimum 2 No. HDMI inputs, 1 No. VGA input, USB interface, RJ-45 LAN connectivity, vertical and horizontal lens shift, digital keystone correction, built-in speaker and ceiling projection capability, complete with all standard accessories, remote control, power cord, HDMI cable of required length, VGA cable, ISI marked heavy duty ceiling mount bracket with safety wire / cable, all necessary hardware, clamps, fasteners, connectors etc. complete. The work shall include making all electrical and signal connections with FRLS copper conductor of adequate size in ISI marked PVC conduit as required, proper alignment, focusing, testing and commissioning complete in all respect as per approved drawings and directions of Engineer-in-Charge. The projector shall be supplied with minimum 01 year comprehensive onsite warranty including projector unit and all supplied accessories complete. |
| 34 | Providing, supplying & fixing of manually operated self-lock pull-down projection screen of 130 inch diagonal viewing size, 16:9 aspect ratio, matte white screen surface with black masking borders, wall/ceiling mount type complete with roller mechanism, locking arrangement, mounting brackets and all accessories required for complete installation and commissioning as directed by Engineer-in-Charge. |
| 35 | Providing, supplying, installation, testing & commissioning of Audio-Visual Connectivity System for conference hall / board room applications comprising recessed conference table / floor mounted AV connectivity box made of powder coated metallic housing with flush type lid arrangement, complete with minimum 2 No. HDMI input ports, 1 No. VGA input port with 3.5 mm stereo audio input and 1 No. HDMI output port, suitable for connection with projector / display system, including HDMI signal booster / distribution amplifier wherever required for proper transmission of AV signals. The work shall include supply & laying of high speed HDMI cables (minimum Category-2 compliant), VGA cables, stereo audio cables, connectors, adaptors and all accessories of required length, drawn through ISI marked PVC conduit / approved PVC raceway or cable trunking as required, complete with proper termination, ferruling, identification and labelling of all cables and ports, testing of complete AV system, synchronization with projector/display equipment and commissioning complete as per approved drawings and directions of Engineer-in-Charge. |
| 36 | Providing, supplying, installation, testing & commissioning of 55 inch (1397 mm) diagonal 4K Ultra High Definition (3840 × 2160 pixels) commercial / professional grade LED display panel of approved make equivalent to Sony / Samsung / LG / Panasonic, having minimum 3 No. HDMI inputs, minimum 2 No. USB ports, built-in Wi-Fi and LAN connectivity, brightness not less than 300 cd/m², contrast ratio minimum 5000:1 and viewing angle minimum 178° (H/V), suitable for conference hall / training room applications, complete with heavy duty powder coated M.S. wall mounting bracket with tilt arrangement, HDMI cable of required length, power cord, necessary hardware, making electrical connections with FRLS copper conductor wiring in ISI marked PVC conduit including suitable MCB protection, testing, commissioning and complete installation as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
