|
| 1 | A. DISMANTLING DEMOLISHING & REPAIRS WORK Crack filler for plasters, IPS, cement sand screeds and non – structural cracks. Do Not open the cracks, Clean the cracks so as to free them from oil, dust, loose particles etc.Moisten the surface with water, Fill cracks with EPCO – ACR using spatula or a putty knife. While applying avoid formation of cavity or bubbles. After filling , allow the surface to dry for at least 24 hours. Apply in layers at 24 hours interval. If the depth of the crack is more than 10mm. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent. |
| 2 | Repairs to plaster in patches of 2.5 sq.m. & under including cutting the patch in proper shape & preparing & plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead, With cement mortar 1:4 (1 cement : 4 fine sand) |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead. |
| 4 | Dismantling cement asbestos celotex or other ceiling or partition hard broad wall including stacking of serviceable materials and disposal of unserviceable materials within 50 mts. lead. |
| 5 | Dismantling the tile & stone work in all thickness in floors laid in single /multiple layers (ceramic/mosaic/kotha or any other flooring etc) in cement /adhesive as case may be including stacking of dismantled materials within 50 Meters lead etc complete. Note :- Single plan area for (ceramic +misaic + any other flooring) will be considered for payment. |
| 6 | Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc. complete as per specification no. WG-DM/PW |
| 7 | Dismantling the existing Telephone / Lan / Wan / TV cables and wires of all sizes along with casing-capping / conduit complete as per specification No: WG-DM/PW |
| 8 | Dismantling the existing Aluminium/copper mains,submains wiring upto 10 sq.mm. along with accessories etc.Complete as per specification No: WG-DM/PW |
| 9 | PLASTERING AND FINISHING WORKS12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 10 | Removing white or colour wash by scrapping, sand papering & preparing surface smooth including necessary repairs to scratches etc. complete |
| 11 | Providing & applying white cement based putty of average thickness 1.00mm of approved brand & manufacturer, over the plastered wall surface to prepare the surface even & smooth complete |
| 12 | Applying one coat of distemper primer of approved brand & manufacture on wall surface |
| 13 | Wall painting (two or more coats) with plastic emulsion paint of approved brand & manufacture on new work to give an even shade |
| 14 | Applying priming coat with ready mixed primer of approved brand & manufacture on wood work complete |
| 15 | Applying priming coat with ready mixed primer of approved brand & manufacture on steel work |
| 16 | Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade |
| 17 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade.. |
| 18 | Painting three or more coats with acryllic exterior paint of approved brand & manufacture (such as weather shield, Apex) including applying one coat of cement primer & one coat of surface treatment etc. complete, At all heights from ground level |
| 19 | FLOORING AND FLOOR FINISHESProviding and laying not less than 2.0 mm thick homogeneous sheet vinyl flooring of approved make and colour, including cost of vinyl sheet, adhesive, heat welded joints, sub-floor preparation with self-levelling compound, labour, consumables, rolling and protection, complete as per manufacturer’s specifications and directions of Engineer-in-Charge. |
| 20 | Providing and laying engineered wooden floor skirting of height 75mm of approved make (armstrong/ ego ) laid as shown in drawing including adhesive also includes in the item.the item also include levelling with plaster of paris if required & as per instruction of engineer in charge. |
| 21 | MISCELLANEOUS WORKSProviding anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building : Post construction |
| 22 | Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete |
| 23 | ELECTRICAL WORKS'Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.'(c) Group C -- with Cat A Modular Accessories |
| 24 | 'Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 25 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. (a) Cat A |
| 26 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required. '(a) Cat A |
| 27 | Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator).(f) 8 way double door Cat A |
| 28 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required(e) TPN, Cat A |
| 29 | Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required(b) 40 A, Cat A |
| 30 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(a) SP, Cat A |
| 31 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed steel conduit (heavy) of appropriate size as required.(a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit) |
| 32 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed steel conduit (heavy) of appropriate size as required.(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 33 | Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.(b) 25 mm |
| 34 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 Core 2.5 sq.mm |
| 35 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 Core 6 sq.mm |
| 36 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(1) 4 x 1.5/2.5 Sq. mm. |
| 37 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(3) 4 x 6 Sq. mm. |
| 38 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required |
| 39 | Supplying and laying 8 SWG copper wire at 0.5 m below ground level for conductor earth Electctrode including soldering etc. as required |
| 40 | Supplying and erecting LED Panel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 41 | Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, Max. Energy Consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF (Wall Fan) |
| 42 | Supply & erecting fan hook box (100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required |
| 43 | Supplying & erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire |
| 44 | Supplying & fixing stepped type Electctronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required(b) Cat B |
| 45 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(a) 5/6 A switch Cat A |
| 46 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(c) 15/16 A switch Cat A |
| 47 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(d) 3 pin 5/6 A socket outlet Cat A |
| 48 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(e) 6 pin 15/16 A socket outlet Cat A |
| 49 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(f) Telephone socket outlet Cat A |
| 50 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required(a) 1 or 2 Module (75 mm x 75 mm) |
| 51 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required(b) 4 Module (125 mm x 7 mm) |
| 52 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required(c) 6 Module (200mm x 75 mm) |
| 53 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required(d) 8 Module ( 125 mm x 125 mm) |
| 54 | TELEPHONE & DATA NETWORINGSupplying & fixing of following sizes of rigid PVC conduit along with accessories in surface(medium)/recess(heavy) including cutting the wall & making good the same in case of recessed conduit as required (b) 25 mm |
| 55 | Supplying & drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured tElectphone cable ITD/DOT approved, with GI saddles on wall or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required (a) 2 Pair |
| 56 | Supplying & drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (a) Cat 6 |
| 57 | Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A |
| 58 | HVACSupplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ SAC |
| 59 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 2.1TR to 2.3TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC |
| 60 | Providing annual comprehensive maintenance contract for 1.5 TR split/window air conditioning unit complete as per terms & conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work & plastic material. |
| 61 | Providing annual comprehensive maintenance contract for 2 TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material. |
| 62 | Carrying out core cutting of size 3\\" to 5\\" dia x 15\\" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. |
| 63 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 64 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 65 | Supplying and erecting slotted angles, frames etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer. |
| 66 | Unarmoured PVC/XLPE 1100 V cable 3 core 1.5 sq.mm copper |
| 67 | Unarmoured PVC/XLPE 1100 V cable 3 core 2.5 sq.mm copper |
| 68 | INTERIORS, FURNITURE WORKS & ASTHETICSProviding & fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main \\"T\\" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, & cross \\"T\\" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm & laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main \\"T\\" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia & 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main \\"T\\" bottom exposed with 24mm of T-section shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete. |
| 69 | Providing and fixing Gypsum Board false ceiling in proper line and alignment, suspended from the slab with suitable hangers/supporting suspenders. The false ceiling shall be installed as per the approved design, maintaining proper levels, line, and dimensions, complete in all respects and as directed by the Engineer-in-Charge. |
| 70 | Providing and fixing gypsum side patti for the sides of 2' x 2' ceiling and gypsum board, including necessary supporting framework with form channels fixed to the slab . The work shall include shifting of materials up to two floors and use of required working arrangements such as H-frame/scaffolding, considering the working height exceeds 3 meters, complete in all respects and as directed by the Engineer-in-Charge. |
| 71 | SOLID PARTITION FINISHED WITH LAMINATEProviding and fixing in position full-height partition wall made out of aluminium framework of size 65 mm × 38 mm tubular sections, 18mm gauge, having grid spacing at 600 mm × 600 mm centre-to-centre both ways, securely fixed to floor, walls, and ceiling as per approved design. The framework shall be clad on both sides with 12 mm thick Marine BWP (Boiling Water Proof) plywood and finished with 1.0 mm thick decorative laminate of approved shade, texture, and finish.The partition shall incorporate decorative arched openings/niches of approved size and profile as per drawings, including necessary framing supports, curved edge finishing, backing surfaces, and laminate finish complete in all respects. Niches/openings shall be suitable for display elements/planters/storage features as indicated in the approved design. All exposed edges shall be neatly finished with matching edge banding/beading.The cavity between framework members shall be filled with glass wool insulation for acoustic treatment. Necessary provisions shall be made for wire management, conduits, and cut-outs for electrical/data/voice services, including modular switch plates wherever required. The work shall include all necessary hardware, fasteners, grooves, adhesives, cutting, bending/forming for arches, scaffolding, and making good adjoining surfaces upon completion.All materials shall be of approved make and quality. Complete in all respects as per approved drawings, specifications, and directions of the Engineer-in-Charge. |
| 72 | FULL HEIGHT GLASS PARTITION (12mm thick)Providing and fixing full height glazed partition up to ceiling level using 12mm thick toughened glass. The toughened glass shall be securely fixed at the top, bottom, and sides within a framework consisting of 19mm thick plywood enclosed in a wooden “C” shaped channel made of second class indian teak wood of size 75mm x 300mm. The exposed surface shall be finished with 1mm thick laminate of approved make and shade. The work shall include all necessary fittings, fixtures, labour, materials, and accessories required for proper installation, complete in all respects as per specifications and to the satisfaction of the Engineer-in-Charge.Note : Rate should be exclusive of second class indian teak wood frame. |
| 73 | GLASS PARTITION (10mm thick)Providing and fixing glazed partition of 900 mm height using 10 mm thick toughened glass, fixed at the bottom with stainless steel (S.S.) clamps of approved make and finish, securely mounted onto the partition framework. The work shall include all necessary fittings, fixtures, accessories, cutting, polishing, alignment, and installation complete in all respects as per the approved specifications and to the satisfaction of the Engineer-in-Charge. |
| 74 | Providing and fixing 12 mm thick frameless toughened glass door of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing. The work shall include all necessary fittings, fixtures, labour, materials, and accessories required for proper installation, complete in all respects as per specifications and to the satisfaction of the Engineer-in-Charge. |
| 75 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. (b) Second class Indian teak wood |
| 76 | FROSTED FILM FOR CABIN GLASSESProviding and fixing frosted Glass film partly opaque and partly translucent on glass internal partitions and doors as per approved sample, design, drawing, & direction of the Engineer with necessary adhesive materials; etc complete. |
| 77 | WALL PANELLINGProviding and fixing PVC wall panelling/louver panelling on the front side of columns, including preparation and fixing of rigid wooden framework securely anchored to the existing column or supporting structure. The framework shall be aligned properly and designed as per the required spacing and angle to achieve uniform appearance and aesthetic finish. The work shall include fixing of pre-fabricated PVC panels/louvers using suitable screws, adhesives and accessories, maintaining proper alignment, equal spacing and level throughout, including cutting, edge finishing, necessary supports, scaffolding, labour, materials and all incidental works complete as directed by the Engineer-in-Charge. |
| 78 | WORK STATION TABLESProviding, fabricating, and fixing office work tables of size 950 mm (L) × 750 mm (H) × 600 mm (D), made of marine-grade plywood of approved quality and thickness, complete with two pencil drawers, including one drawer with locking provision and approved quality hardware, telescopic channels, handles, and fittings. The front-side vertical support/panel shall extend an additional 200 mm above the table top level for concealing electrical wiring and accommodating modular plug points/switches, as per approved design and electrical layout. All exposed surfaces shall be finished with 1.0 mm thick decorative laminate of approved make and shade, and all inner surfaces with balancing laminate, including edge banding on all exposed edges. The table shall include all necessary provisions for wire management, cut-outs, conduits, and access panels as required. Complete in all respects, including all materials, labour, hardware, fixtures, and fittings, as per approved drawings, specifications and directions of the Engineer-in-Charge.(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 1st level but excluding cost of GST.) |
| 79 | EXECUTIVE DESKSupplying and placing in position Executive Dsek with side unit with an inbuilt pull-out keyboard tray. All material shall be of approved make and colour. Size not less than for desk W=165cm, D=70cm and H= 74.3cm and for side unit W=100cm, D=45cm and H= 74.3cm. All exposed surfaces to be finished with 1.0 mm thick decorative laminate of approved shade and make and inner surfaces with balancing laminate. Edges to be properly edge-banded. The work shall be completed as per approved drawings, specifications and directions of the Engineer-in-Charge.(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 1st level but excluding cost of GST.) |
| 80 | DEMONSTRATION TABLEProviding and placing in position circular demonstration/display table of 1.0 m diameter, having adjustable height ranging from 750 mm to 1200 mm from finished floor level, complete with centrally positioned circular MS pedestal leg/base fabricated from approved size and thickness metal sections. The metal pedestal and base plate shall be finished with powder coating in approved shade and finish, including necessary levelling arrangement, hardware, fittings, and supports complete.The table top shall be made of approved thickness Marine BWP plywood/engineered wood with smooth finished edges, finished on top and exposed edges with 1.0 mm thick decorative laminate of approved shade, texture, and finish, including balancing laminate on the underside wherever required. The table shall be suitable for demonstration/display purposes and designed for stability, durability, and ease of operation during height adjustment.The work shall include complete fabrication, assembly, transportation, installation, and making good at site, complete in all respects as per approved drawings, specifications and directions of the Engineer-in-Charge.(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 1st level but excluding cost of GST.) |
| 81 | BENCH WITH FLIPPABLE PLANKSProviding, fabricating, and fixing continuous built-in bench seating of size 850 mm (L) × 600 mm (D), along the window side in traditional Goan balcao-inspired style, constructed with MS framework of approved section and thickness, and finished with Marine BWP plywood with 1.0 mm thick decorative laminate of approved shade and make complete. The bench shall be provided with a continuous comfortable backrest of approved profile and height, integrated with the seating system as per approved design. The seating unit shall also include flippable work/writing planks (500mm x 350mm) mounted on powder-coated MS pivot support brackets with approved quality hinges and hardware, allowing smooth movement and stable working position. All materials, fabrication, fixing, hardware, finishes, and accessories shall be complete in all respects as per approved drawings, specifications, and directions of the Engineer-in-Charge.(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 1st level but excluding cost of GST.) |
| 82 | Office TableProviding, making and fixing office table 900mm (L) x 750 mm (H) x 755mm (D) comprising table top and vertical supports, fabricated from marine-grade plywood of approved quality and thickness. All exposed surfaces to be finished with 1.0 mm thick decorative laminate of approved shade and make, and inner surfaces with balancing laminate. Edges to be properly edge-banded. The work shall be completed as per approved drawings, specifications, and directions of the Engineer-in-Charge.(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 1st level but excluding cost of GST.) |
| 83 | Providing & fixing cement board 12mm thk for panelling of existing Windows closing including frame work if necessary, with required hardware etc. complete |
| 84 | ROLLER BLINDS Providing & fixing in position roller blinds of approved make, colour, shade of varying length, approved fabric with aluminium extruded rail powder coated in white. Control unit to be made of high strength reinforced plastic. Roller tube to be anodised extruded tube of high strength alloy, including all necessary fittings & fixtures like idler, head rail, control unit, roller tube, bottom rail, operating chain, fixing brackets, clamps, etc. complete. All the materials shall be of approved make. All works complete as per approved drawings, specifications and directions of the Engineer-in-Charge. |
| 85 | EXECUTIVE CHAIRSupplying and placing in position Executive High back chair with thick seat cushion in solid pop colours tubular-frame back and mesh upholstery. This light chair should be completed with slim, wide loop armrests. All material shall be of approved make and colour. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 1st level but excluding cost of GST.) |
| 86 | WORKSTATION CHAIRSupplying and placing in position ergonomic revolving workstation chairs with lockable castor wheels, upholstered seat and back cushions, and ergonomically contoured back support suitable for prolonged workstation use. The chair shall be provided with adjustable seat height mechanism, centre tilt/synchronous tilt mechanism with tilt tension adjustment, and fixed or adjustable armrests made of durable Polypropylene material. The base shall be of high-strength nylon/metal with smooth and lockable castor wheels suitable for office flooring.The chair upholstery, finish, colour, and overall design shall be as approved by the Engineer-in-Charge and shall match the approved interior scheme. All materials shall be of approved quality and make such as Godrej / Durian / Featherlite or equivalent approved brand. Complete in all respects as per approved drawings, technical specifications, and directions of the Engineer-in-Charge.(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 1st level but excluding cost of GST.) |
| 87 | PLATFORMProviding and fixing in position raised platform of 300 mm height, constructed using MS tubular framework of approved section size RHS 50mm X 50mm and thickness 5mm having grid spacing at 600 mm × 600 mm centre-to-centre both ways, securely fixed to floor and walls as per approved design with necessary cross members, stiffeners, base plates and supports, treated with anti-rust primer and paint complete. The top surface shall be finished with approved 19mm thickness Marine BWP plywood fixed over the MS framework, including necessary screws, adhesives, and supports as required. The top surface as well as all exposed vertical faces/skirting of the platform shall be finished with approved quality vinyl flooring.The work shall include all cutting, fabrication, levelling, anchoring to floor, provisions for service routing if required, making good adjoining surfaces, and all necessary hardware, accessories, labour, and materials complete in all respects as per approved drawings, specifications and directions of the Engineer-in-Charge. |
| 88 | STORAGE CABINETProviding, making and fixing storage cabinets comprising vertical storage units of 755mm depth with internal horizontal partitions each of height 375mm. All fabricated from marine-grade plywood of approved quality and thickness, finished with 1.0 mm thick decorative laminate on all exposed surfaces and balancing laminate on inner surfaces. The cabinets shall be fitted with approved hardware fittings including hinges, handles, locks, magnetic catchers, and edge banding wherever required. The work shall be executed complete in all respects as per approved design and direction of the Engineer-in-Charge.(Please Note : the rate should be inclusive of contractor profit, loading & unloading charges, transportation charges, assembling charges including lead of 100m and lift upto floor 1st level but excluding cost of GST.) |
| 89 | INDOOR PLANTSSupplying and placing indoor plants of approved species and height in decorative planters/pots of approved size, shape, and finish, complete with growing medium, manure, accessories, transportation, and placement as per approved design and directions of the Engineer-in-Charge. |
| 90 | SOCIAL SCIENCE LABORATORY - Entrance Name Plate : Providing & fixing Acrylic Board name plate at the entrance |
| 91 | Sinages : Providing & fixing Foam Board made sinages Please Enable Macros to View BoQ information |
