Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified. |
| 2 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified. |
| 3 | Taking down shutters of any description n. exc 1 Sqm each including refixing in same opening after easing and adjusting complete all as specified. |
| 4 | Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each including refixing in same opening after easing and adjusting complete all as specified. |
| 5 | Taking down shutters of any description n. exc 1 Sqm each complete all as specified. |
| 6 | Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified. |
| 7 | S & F 2nd class hard wood plain solid straight chowkats and frame of wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 8 | Cutting holes in brick wall for inserting holdfast and making good dismantled portion by filling PCC (1:2:4) type B-1 exc. half brick but n.exc one brick incl existing surface finishes complete all as specified and as directed. |
| 9 | S&F mild steel work, Grade Fe-410-0 or Fe- 310-0, as in flat iron (for holdfast) complete all as specified and as directed. |
| 10 | S&F for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panel only) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats all as specified and directed |
| 11 | S&F for 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) complete all as specified and directed |
| 12 | Supplied and fixed 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, confirming to IS- 2202(Part-I-1999) , ISI Marked for cupboard complete all as specified and directed |
| 13 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead f plain colour PVC sheet & edges will be painted to matc wit printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing |
| 14 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet s for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling ofwood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick & 15 mm wide PVC sheet beading unsed inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 15 | M&L Anodised aluminium powder coating (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 16 | S&F for Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar,/sliding shutter aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified .(Note wire mesh and glazing will be paid separately under relevant item. Thickness or powder coating not less than 50 micron) |
| 17 | S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 18 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/sliding frame/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required ncluding cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 19 | S&F for Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified. |
| 20 | M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 21 | M & L preparation of Old wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 22 | S&F for 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white and with weight of sheet not less than 9kg per sqm as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed. |
| 23 | S & F Pre-laminated 18/19 mm thick partilcle baords, exterior grade, prelaminated both sides with decorative choice lamiantions complete all as specified and as directed. |
| 24 | S&F concealed star lock powder coated for aluminium window fixed as per manufacturers instructions all as specified and directed. |
| 25 | M&L for preparation of old steel surfaces / MS sheet of any description over 10 cm width or girth and applying two coats of synthetic enameled paint all as specified and directed. |
| 26 | M&L for preparation of new steel surfaces / MS sheet of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed. |
| 27 | S & F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples all as specified & directed. |
| 28 | S & F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples all as specified & directed. |
| 29 | Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specified and directed. |
| 30 | M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with alluminium frame work rubber etc all as specified and directed. |
| 31 | M&L 4 mm thick plain glass sheets ordinary quality in squares n exc 0.5sqm each pane fixed with aluminium frame work etc all as specified and directed. |
| 32 | M&L for 4 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and directed. |
| 33 | Supplied and fixed for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 34 | Supplied and fixed 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and directed |
| 35 | S & F Continuous (piano) hinges 30mm Width of flaps (when open) ,mild steel, bright finish or electrogalvanised complete all as specified and directed |
| 36 | S&F for 65 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed |
| 37 | S&F for 75 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed |
| 38 | S&F for 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed |
| 39 | S&F for 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified. |
| 40 | S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed. |
| 41 | S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed. |
| 42 | S&F for aluminium handles, cast type, anodised Size of handle in 100mm complete all as specified and directed. |
| 43 | S&F for aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed. |
| 44 | S&F for 300 mm mild steel ordinary Rat tail door spring for door closer,complete all as specified and directed. |
| 45 | S&F 100 mm long hasp and staple , mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified. |
| 46 | S&F for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor overall length of cover plate 140mm complete all as specified and directed. |
| 47 | M & L for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick alum,inium alloy sheet foundation box, main ody with stainless steel cover, governing pivot made of brass, other plart made of mild steel heavy duty and fixed. |
| 48 | S & F floor door stopper of Aluminium alloy body and tongue, over all length of cover plate 150mm anodised with hard drawn steel spring, fixed to shutters complete all as specified and as directed. |
| 49 | S&F for 30mm dia stainless steel handle of 45cm to 60cm long complete all as specified and directed. |
| 50 | S&F in repair 75mm size 6 lever brass body concealed lock with duplicate keys, fixed in aluminium doors as per manufacturers instruction all as specified and directed. |
| 51 | S&F in repair PVC coated 25mm dia mild steel chromium plated curtain rod of medium weight and including fixing brackets, finals and decorative end supports etc complete all as directed. |
| 52 | S&F brass door magic eye: as given specification material resin lens +zinc alloy,top diameter: 31.2mm, botom diameter approx 24mm, pipe diameter approx 16mm total length approx 50mm, inner height approx 36mm application 35 to 60mm thick viewing angle 200 degree of surrounding without opening the door unique design ultra clear view and superior finish, wide angle best in class lens for all round visibility the outsider cannot hide any ware, the back cover protects you from the outsider observing any movements inside easy to instal with inbuilt screw over a wide range of door thickness from 35 mm to 60mm etc required at site complete as directed by Engr-in-charge |
| 53 | Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles |
| 54 | M&L Brick work with fly ash bricks (Modular bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed |
| 55 | M&L Brickwork with fly ash modular bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 56 | Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 57 | M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 58 | Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed. |
| 59 | M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) in two layers (5mm finishing layer over 10mm base layer) finished even and smooth without using extra cement with WPC over finishing layer complete all as specified and directed (Note WPC shall be measured and paid seperately) |
| 60 | M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 61 | M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement. |
| 62 | Supply only `Liquid Water Proofing Compound. complete all as specified and as directed . |
| 63 | Material and labour for complete removal of existing treatment surface externally of wall and applying Two or more coats of 100% Premium acrylic emulsion paint (Weather coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (weather proof/weather coat) without any brush marks on the surface in any colour over including necessary scaffolding up to three storeys height of bldgs,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 64 | Material and labour for preparation of newly plastered external surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint (Weather coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (weather proof/weather coat) without any brush marks on the surface in any colour over including necessary scaffolding up to three storeys height of bldgs,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 65 | M&L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and two coats of distemper oil emulsion over a coat of primer of new surfaces complete all as specified and directed |
| 66 | M&L Preparation of old surface complete removal of existing treatment and applying 2mm thick wall care putty over one coat of primer and making the surface smooth and two coats of Oil bound distemper on old surface of wall surface complete all as spd and directed.(old portion) |
| 67 | M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd and directed. |
| 68 | M&L two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as spd and directed. |
| 69 | Material and labour for writing letters or figures (block, Roman, Italic or Indian) exceeding 15 centimeter high but not exceeding 30 centimeter high etc with synthetic enamel paint including necessary scaffolding up to four storeys height of bldgs if required,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 70 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.. |
| 71 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed . |
| 72 | M&L 25 mm thick PCC ,type B-1(20 mm graded aggregate) in flooring cmplete all as specified and directed. |
| 73 | S&F for Vitrified Ceramic tiles 08 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 74 | M & L screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes. |
| 75 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in coloured cement complete all as spd & directed. |
| 76 | M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete all as spd & directed. |
| 77 | M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed.Note:- The stone slab shall be in one piece over kitchen plateform,window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded. |
| 78 | M&L Providing Granite stone any description edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. all as specified and directed. |
| 79 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed. |
| 80 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed. |
| 81 | S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed including concealed pipe to walls, floor, ceiling etc complete all as specified. |
| 82 | Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with all fittings short pieces and fixed including concealed pipe to walls, floor, ceiling etc complete all as specified |
| 83 | S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed including concealed pipe to walls, floor, ceiling etc complete all as specified. |
| 84 | Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed including concealed pipe to walls, floor, ceiling etc completec all as specified |
| 85 | M&L for Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed. |
| 86 | S&F in repair Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated fancy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed. |
| 87 | S&F in repair Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified and directed. |
| 88 | S&F in repair CP Bib taps for 15 mm bore pipe, cast copper alloy screwed down crutch butterfly handle with brass furrelo fixed in repairs complete all as spd and directed. |
| 89 | Supplied and fixed in repair Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both end for iron pipe |
| 90 | Supplied and fixed in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe |
| 91 | S & F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread , all as spd and directed |
| 92 | S&F for in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 93 | Supply and fixed in repairs 15mm bore brass Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange mixing hot and cold water, screwd down for 15mm dia iron pipe complete all as specified and as directed . Note:- Hand shower & over head shower will be measured and paid separately. |
| 94 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 95 | Supplied and fixed in repair CP towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed. |
| 96 | S&F in repair PVC Coloured bathroom cabinet looking mirror divided into shelf overall size 432mm x 311mm complete all as specified and as directed by Engr-in-Charge. |
| 97 | S&F in repairs soap dish of approximatebsize 160x160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 98 | S&F in repair CP towel rail 20mm dia D type 600 mm long complete all as specified and directed. |
| 99 | S& F in repair 15mm CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as spd and directed. |
| 100 | S&F in repair for Toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screwscomplete all as specified and directed. |
| 101 | S&F in repair for 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as spd. |
| 102 | Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet complete all as specified and as directed. |
| 103 | Supplied and fixed in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specfied and as directed. |
| 104 | Supplied and fixed in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes. |
| 105 | S & F in repair 32/40 mm bore PVC waste pipe flexible with minimum length 800mm complete all as specified and directed. |
| 106 | S&F in repair plate rack made of stainless steel 0.50mm thick, over all size 762mm(H) x 787mm(W) x 254mm(D) complete all as specified and as directed. |
| 107 | S&F in repair chromium plated sink mixer table mounted with 450 mm long braided hoses screwed down for 15 mm bore iron pipe complete all as specified and directed. |
| 108 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460mm bowl size 410mm x 330mm x 160mm complete all as spd & directed. |
| 109 | Supplied and fixed Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified including Dismantling of old broken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 110 | Disconnecting existing 1000 ltrs tank, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and refixing in position complete all as specified and as directed. |
| 111 | Supplied and fixed in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms) |
| 112 | Material and labour for cutting down plants / trees of girth not exc 15 cm & surface are not exc 0.36 Sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine )and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-O or cement mortar 1:2 complete all as per manufacturer instructions and as specified. NOTE: Any CI/GI/PVC pipes and fittings damaged during work shall be replaced by new one to insure leakage / seepage free joint without any extra cost to the department and Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc ,hoisting, lowering and protective measures etc up to four storeys height of bldgs and removing of debris out of MoD land complete all as specified and as directed. |
| 113 | Demolition of concrete of any description in any position all as specified and directed. |
| 114 | M&L PCC 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) mixed with water proofing compound as per manufacturer’s instructions as in padding on roof / chajja surface finished even and smooth without using extra cement all as specified and as directed.(Note:- WPC shall be measured and paid separately) |
| 115 | M&L for Providing cement concrete 1:2:4, type B-1, (using 20 mm graded crushed stone aggregate) mixed with water proofing compound as per manufacturer’s instructions as in roof / chajja kerbs,bands etc or mud stops, rounded or chamfered on edges cement all as specified and as directed.(Note:- WPC shall be measured and paid separately) |
| 116 | M&L for taking down of existing tarfelt and bituminous compounds in roof of any discription from roof or terracing,roughening surfaces of old concrete surface by picking u,sweeping clean and washing down with water to remove dust etc providing 15 mm thick screed bed or bedding layer of CM(1:4) for laying water proofing membrane and finishing surface even and smooth w/o using extra cement and providing water proofing treatment over smooth finished surface after applying hot bitumen 85/25 @ 1.2 kgs/Sqm providing laying APP polymer, modified,non-woven polyster mat,reinforced membrane,3mm thick(min)weighing 3.50 kg/Sqm with surface finish of white mineral,by torch application method,with minimum 75mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying one coat of bituminus based solar reflective aluminium paint @ 100Gms/Sqm over PP modified membrane all as specified and directed. |
| 117 | Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store . |
| 118 | Supplied and fixed PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed.(ISI MARKED) |
| 119 | Supplied and fixed PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed. |
| 120 | Supplied and fixed PVC (SWR) bends any radius 110mm dia all as specified and directed.(ISI MARKED) |
| 121 | Supplied and fixed PVC (SWR) bends any radius 75mm dia all as specified and directed.(ISI MARKED) |
| 122 | Supplied and fixed PVC (SWR) junction Single 'T ' any radius 110mm dia all as specified and directed.(ISI MARKED) |
| 123 | Supplied and fixed PVC (SWR) junction Single 'T' radius 75mm dia all as specified and directed.(ISI MARKED) |
| 124 | Supplied and fixed PVC (SWR) branch piece, double 'Y ' any radius 110mm dia all as specified and directed.(ISI MARKED) |
| 125 | Supplied and fixed PVC (SWR) branch piece double 'Y '' any radius 75mm dia all as specified and directed.(ISI MARKED) |
| 126 | S & F in repairs 75mm / 110mm PVC multi floor trap, ISI marked with CP grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed. |
| 127 | S & F in repairs 75mm / 110mm PVC floor trap, ISI marked with CP grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed. |
| 128 | Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm |
| 129 | Supplied and fixed PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed. |
| 130 | Supplied and fixed PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed. |
| 131 | S&F in repair PVC vent cowl for 110 mm dia all as directed by Engr-in-charge. |
| 132 | Cutting holes in brick walls built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required,Depth of embedded portion of holddfasts or lugs measured from the face of the jamb into the wall exc Half brick but not exc one brick complete all as specified and directed. |
| 133 | Dismantling to plain or corrugated MS sheet any gauge, thickness including nainital or similar pattern as in roof covering complete all as specified and directed. |
| 134 | S&F for 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275. |
| 135 | S&F for 0.63mm Plain,black, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) |
| 136 | S &F MS flat iron wind ties including securing with bolts and all necessary drilling bolting or riveting etc.conforming to Fe 410-0 or FE 310-0 complete all as specified and directed. |
| 137 | Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete. |
| 138 | S&F for providing & fixing false ceiling at all heights with fully perforated 12 mm thick micro tegular edged or 10mm thick square edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm.Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 139 | M&L for 4mm thick E Board classic as in false ceiling fixed or laid /inserted to timber/GI/Aluminium frame work with screws. |
| 140 | S&F 605X605 mm anodised Aluminium snap grid frame work for false ceiling in/c fixing fixing of nut bolt clamps with the help of drilling matching etc. complete all as specified and directed |
| 141 | S&F Hangers 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long size of grid 605 x 605mm complete all as specified and as directed. |
| 142 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 143 | S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. |
| 144 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed. |
| 145 | Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed. |
| 146 | M&L for cement concrete type C-2 1:3:6 (using 40mm graded agg) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25 complete all as specified. |
| 147 | M&L for 75 mm thk PCC 1:4:8 type D-2 as in subbase to flooring complete all as specified and as diretcted. |
| 148 | M&L for 100 mm thk PCC 1:4:8 type D-2 as in subbase to flooring complete all as specified and as diretcted. |
| 149 | M&L for chequered cement concrete tile 30cmX30cmX 20 to 25mm thick set jointed and pointed in neat cement siurry in floor with grey cement and pig ments over and including 20mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as directed. |
| 150 | M&L for in replacement of Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC pipe of adequate size with all fittings and accessories) including PVC insulated and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 151 | All as per item No. 150 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size complete all as specified and directed. |
| 152 | All as per item No. 150 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed. |
| 153 | M&L for in replacement of Point wiring with 2.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC pipe of adequate size with all fittings and accessories) including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 2.5 sq mm green in colour as earth continuity conductor connected to common earth dolly for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent complete all as specified and directed. |
| 154 | M&L for in replacement of Point wiring with 4 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC pipe of adequate size with all fittings and accessories) including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 4 sq mm green in colour as earth continuity conductor connected to common earth dolly for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent complete all as specified and directed. |
| 155 | M&L One light point controlled by two two-way switch 5/6 Amp complete all as specified and as directed . |
| 156 | S&f One bell/buzzer point controlled by one bell push complete all as specified and as directed . |
| 157 | Supply & fixing Modular switch 1 way 6A,1 module, 240 Volts complete all as specified & directed. |
| 158 | Supply & fixing Modular switch 1 way 16A,1 module, 240 Volts complete all as specified & directed. |
| 159 | Supply & fixing Modular switch 2 way 6A,1 module, 240 Volts complete all as specified & directed. |
| 160 | Supply & fixing Modular Modular Bell push 6A 1 module 240 volt complete all as specified & directed. |
| 161 | Supply & fixing Modular Socket, 6A - 5 pin combined 2 module, 240 Volts complete all as specified & directed. |
| 162 | Supply & fixing Modular Socket 6A/16A - 5 pin combined 2 module, 240 Volts complete all as specified & directed. |
| 163 | S&F modular White cover plate with frame 01 module |
| 164 | S&F modular White cover plate with frame 02 module |
| 165 | S&F modular White cover plate with frame 03 module |
| 166 | S&F modular White cover plate with frame 04 module |
| 167 | S&F modular White cover plate with frame 06 module |
| 168 | S&F modular Metal flush box 1/2 module |
| 169 | S&F modular Metal flush box 3 module |
| 170 | S&F modular Metal flush box 4 module |
| 171 | S&F modular Metal flush box 6 module |
| 172 | S&F MCCB DB's VTPN type double door in wall / nitch when MCBB's ,to be used Four pole and neutral, 8 way,415 Volt with rated Bus bar ,Suitable for Flush Mounting and Surface Mounting with 160 Amps Copper Bus bar for each phase and 2 Neutral bar, 2 Earth bar, and Cable ties for cable managent,Fully insulated busbar and shrouded Neutral bar ,improved Pan assembly for ease of installation ,Prefitted masking sheet, Reversible Door for IP 43 &IP 54 DB's with provision for DPX3 160 MCCB as incomer, and TPN /SPN/DP/SP out going . complete all as specified and directed. IP :54 Protection |
| 173 | S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed |
| 174 | Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. |
| 175 | Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed. |
| 176 | S&F LED lamp 9 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). |
| 177 | Supply and fixing LED light fitting 1 x 20 Watt (warm/white) 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed. Make: Havells (cat No LHEXAXPNIN1W020) or equivalent |
| 178 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 179 | S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 60 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed. |
| 180 | S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, (Warm White) 220 V AC recessed mounting type with high efficiency PMMA diffuser soft glare free light of colour white/warm white as per requirement at site complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 181 | S&F in repair Supply and fixing post top lantern LED type 20watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.Model No RUBYMINIPT15WLED830PSYMTOPC of Havells/Crompton/Bajaj |
| 182 | S&F in replacement wall mounted decorative Swing Arm type light fitting complete with driver, holder, LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 183 | S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed. |
| 184 | Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V50 Hz, RPM 1200, Copper winding of size 300 mm sweep with, blades, and frame and louvers complete all as spicified and directed. |
| 185 | Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as spicified and directed. |
| 186 | Taking down old exhaust fan any type/size from existing position and depositing to MES yard as directed. |
| 187 | Supply and fix sheet metal enclosures for double door DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 188 | S&F in replacement MCB SPN 32 Amps, 240 Volts, 10 KA complete all as specified and as directed |
| 189 | S&F in replacement MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed. |
| 190 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 191 | S & F GI Tubing medium grade 40 mm dia bore with all fittings such as bends, elbow, socket, reducer etc, laid under floor for protection of cable as specified & directed. |
| 192 | Supply and fix electric water heater(Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 star rated adjustable temprature setting 0-90 degree C complete with accessories such as safety wall, thermostate, NRV indication lamps, inlet outlet connections,air vent connections, connection pieces including all fixing arrangements such as fastners, bilts, nuts washers etc including making good disturbed wall surfaces matching with the existing surface and finishing including taking down of existing Geyser complete all as specified and directed by Engr in charge |
| 193 | M & L for PVC connections 15mm size with PTMT nuts of length 450mm for hot and cold water connection complete |
| 194 | S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed FRLSH cable with multistranded copper conductor 10 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 10 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 10 sqmm earth wire and 2 Run of 10 sqmm cable shall be measured as one run.) |
| 195 | S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed FRLSH cable with multistranded copper conductor 6 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 6 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.) |
| 196 | Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) |
| 197 | Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC. |
| 198 | Taking down sub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
