|
| 1 | Supply installing ,connecting , testing and commissioning in repair automation Panel of adequate size having degree of ingress protection IP-67, factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type double door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer including carry out internal connection with louvers & air vent gasket for natural flow of air for 1 phase, 2 wire, 240 volts, 50 Hz and CPRI approved make, factory made in approved factory duly powder coated externally as well as internally provided with suitable ''U'' type gasket to make it dust and vermin proof & genral construction confirming to IS:8623/93, with provision of threaded earthing stud at bottom & lifting lugs of suitable size at top to lift the feeder piller box safely including containing of detachable plate having provision for entry of armoured cable of adequate size with glands and mounted on a powder coated metal stand including and other jointing material complete with comprising of the following:-a) Automatic Valve Control (Motorised Operating Valve). b) Single phase motorised operating valves control (4 Nos of MOV) |
| 2 | The panel shall consist of the following equipments :- (a) Selector Switch (Main AUTO/MAN Mode, VALVE Mode, Pump AUTO/MAN Mode). (b) Indicator Lamp 230V AC (RED, YELLOW, GREEN, BLUE) (c) Relays / Relay card (24 V DC, 230V AC) (d) Hooter/Alarm 230 V AC/24 V DC. (e) Push Buttons & Push Button with LED indicator (24V DC, 240V AC). (f) SMPS of suitable current & voltage rating. INPUT 230V AC & OUT 24 VDC, 5 A. (g) Step down Transformer of input 230VAC & output 12VAC, 2A. (h) Programmable Logic Controller (PLC 24V DC). MAKE: ALLEN BRADLEY/ SIEMENS/MITSUBISHI/UNITRONICS(j) 0.5 sqmm internal control wiring. (k) Separate MCB’s for 24VDC & 230 VAC equipment & internal wiring. Supply: 240V, 50 Hz Mounting: Wall Mounting type. (l) Water level controller. Make:- S M INSTRUMENTATION/ L&T/SIEMENS/ Universal Switch gear control/Minilec m) GPRS MODEM with antenna and Power adaptor Make: Maestro/Sheetal wireless/MCOM Technology/SM INSTRUMENTATION Note: Location: Gate no.16. |
| 3 | Supply, Installation, Testing and commissioning of motor actuated butterfly valve with the following specifications including all accessories of following size (CI fittings required at site) complete as directed by Engineer-in-Charge (a) Valve size 150mm dia. (b) Designed line pressure 6 kg/Sqcm(c) Operating Angle : 90 degrees(d) Disc material CI with nylon coating(e) Limit switches : 02 Nos for open and close(f) Mounting : Splash proof-Direct on valve/ Extended type as per site requirement.(g) Input Supply : 230V, AC, 50 HZ (h) In built wireless modem compatibility for remote communication(i) Valve position indication with an output of 4-20m A(j) The actuator should be capable of accepting 4-20m A of input of regulating purposes (k) Mannual Operation : Hand Wheel/Rapid ControlMake : ROTORK/S M INSTRUMENTATION/EMTORK/HASSEL HOFFNER/S D TORQUE/ AUMA |
| 4 | 250mm dia |
| 5 | 200mm dia |
| 6 | 150mm dia |
| 7 | 100 mm dia |
| 8 | M & L for non-rising stem type CI sluice valves having double flanged for connections of nominal pressure (PN 1.6) as per IS 14846: 2000 of preferred materials with iron hand wheel stainless steel spindle with Neoprene rubber gasket, nuts, bolts and washers, etc. complete all as specified and as directed of following sizes. |
| 9 | 200mm dia |
| 10 | 150mm dia |
| 11 | 100 mm dia |
| 12 | 80 mm dia |
| 13 | S&F in replacement Cast Iron Non return valve, suitable for 150 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket complete with and including nuts, bolts and washers complete all as specified and directed. Make:- Kirloskar/Leader/L&T |
| 14 | S&F in replacement air release valve, suitable for 250 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket complete with and including nuts, bolts and washers complete all as specified and directed. |
| 15 | Supply & fixing in replacement 6 core, 1.5 sqmm cross sectional area armoured copper conductor cables, 1100 volts grade heavy duty cable PVC insulated and PVc sheathed, laid in trenches/ laid under floor or fixed maked with walls / on poles/in ducts/in GI pipes etc complete all as specified and directed. |
| 16 | Supply & fixing in replacement 2 core, 1.5 sqmm cross sectional area copper conductor cables, 1100 volts grade heavy duty cable PVC insulated and PVC sheathed, laid in trenches/ laid under floor or fixed maked with walls / on poles/in ducts/in GI pipes etc complete all as specified, and directed. |
| 17 | Excavation in trenches not exceeding 1.5 metres wide and not exceeding 1.5 metres in depth for foundation or laying/taking out existing pipe etc and getting out in any type of soil complete all as specified and as directed |
| 18 | Returning, filling in , including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and as directed. |
| 19 | Removing excavated material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. |
| 20 | Taking up or down cast iron/GI steel/DI/PPR tubing with all fittings conncetion, from trenches, walls, floors etc including cleaning for reuse, removal from site compete all as specified an as directed for the following sizes :- |
| 21 | 150 mm bore |
| 22 | 100 mm bore |
| 23 | 80 mm bore |
| 24 | 50 mm bore |
| 25 | 40 mm bore |
| 26 | 25 mm bore |
| 27 | 15/20 mm bore |
| 28 | Refixing, connecting, jointing and testing of old serviceble including cleaning of CI/DI/PPR/GI Pipe with all fittings , laid in trenches/fixing to walls retrieved from item 11.00 of here-in-before complete all as specified and as directed of the following sizes :- |
| 29 | 100 mm bore |
| 30 | 80 mm bore |
| 31 | 50 mm bore |
| 32 | 40 mm bore |
| 33 | 25 mm bore |
| 34 | 20 mm bore |
| 35 | Supply laying & testing GI pipe of medium grade laying under tranches including taking down old u/s pipe and connected fittings/ accessories complete all as specified and directed of following size |
| 36 | 100 mm bore |
| 37 | 80 mm bore |
| 38 | 50 mm bore |
| 39 | 40 mm bore |
| 40 | 25 mm bore |
| 41 | 20 mm bore |
| 42 | 15 mm bore |
| 43 | Supplying, laying, connecting, jointing and testing in trenches 150 mm nominal dia ductile iron pressure pipe for water mains, centrifugally cast, spigot and socket ends (for push on joints), class K9 in any length with external protection of Metallic zinc with finishing layer of bituminous paint and internal linings of Portland cement (with or without additives) mortar with seal coat, all as per IS 8329: 2000 and including materials and jointing with rubber gasket for WA type of application and hardness class 50 for bulb and hardness class 80 for heel all as per IS 5382: 2018 and IS 12820: 2004 complete all as specified and as directed. Note : DI fitting shall be measured and paid separtely |
| 44 | Supplying, laying, connecting, jointing and testing in trenches 100 mm nominal dia ductile iron pressure pipe for water mains, centrifugally cast, spigot and socket ends (for push on joints), class K9 in any length with external protection of Metallic zinc with finishing layer of bituminous paint and internal linings of Portland cement (with or without additives) mortar with seal coat, all as per IS 8329: 2000 and including materials and jointing with rubber gasket for WA type of application and hardness class 50 for bulb and hardness class 80 for heel all as per IS 5382: 2018 and IS 12820: 2004 complete all as specified and as directed. Note : DI fitting shall be measured and paid separtely |
| 45 | Supply and fixing in replacement gun metal gate valves with iron wheel head, screwed both ends for jointing iron pipe, non rising forged brass spindle class I complete all as specified and as directed suitable for following sizes |
| 46 | 50 mm Bore |
| 47 | 40 mm Bore |
| 48 | 25 mm bore |
| 49 | 20 mm bore |
| 50 | M&L high-purity TCCA 90 granules Chlorine for swimming pool efficient to kill bacteria, algae, and microorganisms by oxidizing contaminants like sweat and urine, maintaining sanitary water complete all as specified and as directed |
| 51 | M&L sodium hypochlorite liquid for disinfection, aluminum sulfate (alum) or ferric chloride for coagulation, bio-culture for sludge reduction, and calcium hypochlorite for STP Note : sodium hypochlorite will supplied in seal pack container and empty container will be deposited in MES Store yard |
| 52 | Supply and fixing in repair LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. |
| 53 | Supply and fixing in repair LED ARCH 2 LIGHT with 1N x A60 7.5 W LED Filament Lampin alongwith aluminum die cast with modern artistic design and white/ PC diffuser including all electric connectioncomplete all as specified and as directed |
| 54 | Supply and fix in repair 10 watt new generation bollard light for garden, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source including making pcc plateform of size 0.3m x 0.3m x 0.3m alongwith electric connection complete all as specified and directed |
| 55 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm nominal cross section in service connections complete all as specified and directed |
| 56 | Supply and laying or fixing or passing through pipe, 1100 volts 6sqmm three core grade heavy duty submersible cable with PVC insulated aluminium conductor complete all as specified and directed |
| 57 | Labour only for removal and disposal of sludge formed on the dry bed to a distance exc 1.5KM but not exc 3 KM i.e. out side the periphery of defence land from bed and well including cleaning of bar screen complete all as specified and directed. |
| 58 | Supply and fix in repair aesthatic type Outdoor Hanging Light with 0.5mtr chain with Black Iron box and 9 Watt warm white bulb complete all as specified and directed |
| 59 | Supply and fix inrepair Garden sprinklers covering 50 sq ft with 360-degree as well as adjustable arcs including durable ABS plastic/metallic construction, 1/2 to 3/4-inch threaded inlets, and operating pressures between 20-50 PSI for optimal in old/ new pipeline of any type including connecting fitting and fixturesall complete all as specified and directed |
| 60 | Supply and fixing in repair stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement including Booster open well horizontal pump (Any type)3.0 HP, 3 phase 50Hz , 440 volts ( -15% and 6%) RPM 2880 for high discharge purpose fountain application model LHL. Suction : 80mm, Delivery : 80mm IS- 8034 with max discharge at 12 metrs 860 LPM with base hook and anchor rope6 mm PVC Quoted 10 mtrs, with main contral for water supply with header assembly for two opening point for dischare as per approval complete all as specified and as directed. |
| 61 | Supply and fix in repair water Fountain LED lights (08 Nos) typically feature IP68-rated waterproof stainless steel for submerged safety, operating on low voltage (12V/24V) to prevent shock including high-intensity, energy-efficient LED chips, available in RGB or warm white, featuring 5-8mm toughened glass. Common options include 9W-18W power, to beam angles, and durable, corrosion-resistant, or chrome-plated construction alongwith repair of exisitng fountain round shape of wall of size (4.40 diameter x 0.92mtr height x 0.048 width) by dismantling tiles and installing new tiles on complete area of fountain including inner floor and wall inner as well as outer side of colour/size will be approved by engr-in-charge alongwith brick work and plasters at patched complete all as specified and directed. |
| 62 | Supply & installation in repair of control panel box with CRC sheet powdered coated unit starter for pump upto 3 hp :01 with MCB s , individual control Voltmeter , Amp meter & Indicator and provision for space lifting driver , voltage stabliser for lights & all MCB complete all as specified and as directed |
| 63 | Supply and fix ion repair Fountain on line strainer cum screen filter Inlet and outlet 80 mm Dia with ss net and drain provision and opening set woth base plumbing assembly complete all as specified and as directed |
| 64 | Supply and fixing systematic plan by computer print in colour of sewage treatment plant on hard board of size 2 mtr x 1.5 mtr showing details of incoming and outgoing of water including detail of complete equipment alongwith capacity and specification all as directed at site complete all as specified and as directed. |
| 65 | Material and labour for construction of brick masonary valve pit chamber of size as required using sub class ‘B’ bricks complete, earth work, PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation,brick masanary with sub class bricks 23 cm build in cement mortor with 1:6 , plastering of 10 cm thickness internally and 15 cm externally(1:4) cement mortor and below grond level PCC with 1:2:4 type B2 using 20mm grade stone aggregate ,coping 50 mm thick including frame of size 75x75x6mm made of angles iron and chamber cover made of MS sheet of 4 mm thickness double leaf including MS hinges locking arrangement with provision of locks and keys , painting of the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including necesarry excavation , returning & filling& removing of surplus soil etc complete all as specified and as directed. |
| 66 | Supply, Installation, Testing and Comissioning of Ultrasonic Level Sensor alongwith all electrical connection from sensor to panel upto range 0-8M at OHT and UG Sump complete all as specified and as directed.Make : Banner / E&H / Honeywell. |
| 67 | M&L for in replacement MS sheet cover/Angle iron/MS pipe/Nut bolt including fixing arrangement as per site remt & two coats of synthetic enamel black paint over one coat of red oxide primer complete all as specified and as directed. |
| 68 | Supplying, laying, connecting, jointing and testing in trenches ductile iron fittings (special castings) (class K12 as per IS 9523: 2000) for ductile iron pressure pipe for water mains upto 450 mm nominal dia (spigot and socket and flange ends (for push on joints and flanged joints) with external coatings of Metallic zinc with finishing layer of bituminous paint and internal linings of Portland cement (with or without additives) mortar with seal coat, all as per IS 9523: 2000 and including materials and jointing with rubber gasket for WA type of application and hardness class 50 for bulb and hardness class 80 for heel all as per IS 5382: 2018 and IS 12820: 2004 for push on joints and rubber gasket as per IS 638: 1979 for flanged joints complete all as specified and as directed. |
| 69 | Testing of effluent test from auth lab of waste water discharge from sewage treatment plant and record the parameter in register and report of the same submitted to MES office monthly by contractor rap.:- (Note :- collection of samples from STP to Lab and submission of test report is responsibilty of contractor)Test are as follows :-(a) pH value(b) Turbidity(c)TSS- Total suspended solids(d) Temprature(e) Dissolved Oxygen(f) Pordable Biochemical oxygen demand (g) Chemical oxygen demand(h) Total organic carbon Please Enable Macros to View BoQ information |
| 70 | Testing of effluent test from auth lab of waste water discharge from sewage treatment plant and record the parameter in register and report of the same submitted to MES office monthly by contractor rap.:- (Note :- collection of samples from STP to Lab and submission of test report is responsibilty of contractor)Test are as follows :-(a) pH value(b) Turbidity(c)TSS- Total suspended solids(d) Temprature(e) Dissolved Oxygen(f) Pordable Biochemical oxygen demand (g) Chemical oxygen demand(h) Total organic carbon Please Enable Macros to View BoQ information |
