|
| 1 | M & L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 3 | M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position complete all as specified and as directed. |
| 4 | M & L for rubber moulded Coloured Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6 etc including dismantling of existing chequered tiles of any type complete all as specified and as directed. |
| 5 | S&F for coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade as in floor, over and incl 30mm thcik sand cushion, complete all as specified and directed. |
| 6 | M & L Heavy duty vitrified 8-9 mm thick external designer floor tiles, parking tiles etc any colour, shape and size upto the area of 0.18 sqm each tile thick, set & jointed in neat cement slurry and pointed flush with grey cement and pigments to match colour of tiles in floors over 15 mm thick screed bed or bedding layer in cement mortar 1:6, including dismantling of existing floor tiles of any type and in any position complete all as specified and as directed. |
| 7 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 8 | Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed. |
| 9 | M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in in foundations, filling and mass concrete, complete all as specified and directed. |
| 10 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4), complete all as specified and directed. |
| 11 | Description all as per item no 10.00 but except bricks. |
| 12 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed. |
| 13 | Removing excavated material (Soil) not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed. |
| 14 | Taking down cement or cement lime plaster, any description on brick or stone walls, ceilings or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 15 | M&L for Rendering 15 mm thick in cement mortar 1:4 on fair face of brick work/ concrete surfaces with water proofing admixture finished even and smooth without using extra cement, complete all as specified and directed. |
| 16 | M&L for Rendering 15 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 17 | M&L for Rendering 10mm thick in cement mortar 1:3 on ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 18 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with12mm wide groove as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete all as specified |
| 19 | S & F factory made WPC railing combining WPC board/Fancy designer type grating and WPC frame 100% solid WPC (wood polymer composite) railing of required length and of 2' to 2.5' height , comprising of virgin PVC resin of K value 58-60 (Suspension Grade), Calcium Carbonate and natural fibres (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, 18mm thick WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cbm manufactured by \\"RAJSHRI\\" an ISO 9001-2015 certified Company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge), Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with WPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3\\"x3\\" GI 'L' or SS cleats to support vertical frame lengths, incl dismantling of existing railig of any description all as specified and as directed. (Make : Rajshree or equivalent as approved by GE) (Note : (i) The said item shall be fixed over boundary walls/roof tops and in any other positions as per requirement at site (ii) Thickness of WPC Jali will be 18mm thick) |
| 20 | S & F in repair precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvers and jellies, 50 mm thick ( design and pattern as approved by GE) set in CM (1:4) including all mouldings but excluding frame fixed over bdy wall or walk ways or in any position etc. complete all as specified and directed and directed. |
| 21 | S & F in repair, precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jellies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed and directed. |
| 22 | S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc including taking down of existing pipe complete all as specified and directed. |
| 23 | Description all as per item No 22.00 above but 20 mm bore. |
| 24 | S&F in repair white colour Rotational moulded polyethylene water storage tank 1000 litres capacity, white triple layer construction (cylindrical vertical closed top),including 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball hoisted & fixed in position including all fittings complete all as specified and as directed. |
| 25 | Description all as per item No 24.00 above but 500Ltr capacity. |
| 26 | S & F in repair Vitreous china single Piece floor / wall mounted WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, S Trap-300 mm including connection to drain pipe with all fitting and fixture complete all as specified and as directed. |
| 27 | S&F in repair 10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, complete all as specified and as directed. |
| 28 | S&F in repair internal fittings for flushing system of single piece WC. |
| 29 | S & F Designer type high quality fancy type looking mirror of size exc 0.75 Sqm but not 1.50 sqm as approved by Engr-in-Charge, 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed. |
| 30 | S & F Designer type high quality fancy type looking mirror of size exc 0.75 Sqm but not 1.50 sqm with variable LED light with touch screen sensor as approved by Engr-in-Charge, 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed. |
| 31 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 32 | S & F in repair 15 mm bore bib tap chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc. complete all as specified and directed and directed. |
| 33 | S&F in repair 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specified and directed and directed. |
| 34 | S&F in repair 15 mm concealed stop valves/ angle valve with long shank and cup chromium plated fancy type for iron pipe and fixed etc. complete all as specified and directed & directed. |
| 35 | S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shank and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed and directed. |
| 36 | S&F in repair brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. |
| 37 | S & F in repairs Fancy type sink mixer for mixing hot and cold water with swinging port, screwed for iron pipe,15mm bore complete all as specified and directed. (Make : Jaquar/Marc/Kohler) |
| 38 | S & F in repair CP shower rose fancy type 125 mm x 125mm size with 300 / 600 mm long shower arm, suitable for 15mm bore pipe, complete all as specified and directed. (Make : Jaquar/Marc/Kohler) |
| 39 | S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm. |
| 40 | S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm. |
| 41 | S & F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for IWC & EWC etc. complete all as specified and directed and directed. |
| 42 | S&F in repairs CP Health Faucet with 8mm to 10mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified. |
| 43 | S & F in repairs Polyethylene syphon kit assembly (Cascade Type Floor Mounted as required) for flushing cistern, complete all as specified and directed. |
| 44 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated AC sheeting any gauge thickness as in roof covering, complete all as specified and as directed. |
| 45 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour as in ridges hips, valley gutter, drip and straight flashing, fixed with self tapping screws etc. including dismantling of plain or corrugated AC sheeting complete all as specified and directed |
| 46 | M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) as in vertical surfaces such as skirting and dado etc. and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over & including 15 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 47 | S & F for 2 mm thick fibre glass reinforced translucent corrugated/Plain sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or crancked hook bolts including dismantling of existing sheeting of any type, complete all as specified and directed. |
| 48 | S&F in repair internal fittings, inner head suitable for wall mixer, basin mixer complete all as specified and directed. |
| 49 | M & L for Preparation of newly plastered /unplaster surfaces of walls and ceilings and applying Two coats of Oil Bound Distemper on wall surfaces over a coat1-2mm thick wall care putty, complete all as specified and directed and directed. |
| 50 | M & L for Preparation of old plastered /unplaster surfaces of walls and ceilings and applying one coats of Oil Bound Distemper on wall surfaces over a coat wall care putty complete all as specified and directed and directed. |
| 51 | M & L for preparation of plastered or unplaster or brick walls or pointing surface old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Cement Based Paint complete all as specified and directed and directed. |
| 52 | Description all as per item no 51.00 but a coat of exterior emulsion paint. |
| 53 | M & L for applying one coat of synthetic enamel paint including preparation of old wooden surfaces of any description over 10 cm width or girth and filling the gaps with putty complete all as Specified and directed. |
| 54 | M & L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of doors, gates, windows, grills, frames, roof trusses, vertical posts, view cutter sheet etc. any description over 10 cm width or girth at any position and complete all as specified and directed. |
| 55 | M & L for applying one coat of synthetic enamel paint through spray painting machine including preparation of old steel/AC sheet/Concrete surfaces of roof sheet , pre-painted roof sheet of any pattern , design , any position at any height of building and complete all as Specified and directed. |
| 56 | M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off from premises complete all as specified and directed and directed |
| 57 | M & L Vitrified ceramic tiles of size 600 x 600 x 8 -10mm thick (square/rectangular), ( shade/ colour/ Design/ pattern as approved by GE) ,as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 in floor complete all as specified and directed and directed by Engr-in-Charge |
| 58 | M & L Vitrified ceramic tiles of size 600 x 600 x 8 -10mm thick (square/rectangular), ( shade/ colour/ Design/ pattern as approved by GE) ,as in skirting , dado , vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick rendering in CM 1:4 etc complete all as specified and directed and directed by Engr-in-Charge |
| 59 | M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) size 395 x 395 mm / 400 x 400 mm , in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 etc. complete all as specified and directed and directed by Engr-in-Charge |
| 60 | M & L Coloured Glazed ceramic tiles size (350x250), (450x300) or (600 x 300) x 7-8 mm thick, in vertical surface such as skirting, dados , etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in CM 1:4 etc complete all as specified and directed and directed by Engr-in-Charge |
| 61 | M&L for vitrified Ceramic tiles, 8 to 10 mm thick ( shade/ colour/ Design/ pattern as approved by GE) polished /matt finished size 600mm x 1200mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick rendering in cement mortar (1:6) etc. complete all as specified and directed and directed by Engr-in-Charge. |
| 62 | M&L for vitrified Ceramic tiles, 8 to 10 mm thick (shade/ colour/ Design/ pattern as approved by GE) polished /matt finished size 600mm X 1200mm as in skirting/dado/vertical surface etc. laid over and including 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles etc. complete all as specified and directed and directed by Engr-in-Charge |
| 63 | S & F in repair Vitreous China Urinal, full stall type with fixing accessories, white complete all as specified and directed and directed. (Make : Jaquar cat part No.URS-WHT-13261 and equivalent in Hindware/Parryware /Cera). |
| 64 | S & F in repair urinal partition of 12mm thick (900mm x 450mm) toughened glass fixed with chromium plated screws and bracket of suitable size complete all as specified and directed. (Make : Jaquar / Hindware/Parryware/Cera) |
| 65 | S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. complete all as specified and directed and directed. |
| 66 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 67 | S&F in repair Urinal spreader of CP brass for fixing with 15 mm dia pipe. |
| 68 | S&F in repair toilet paper holder chromium plated with flap complete all as specified and directed. (Make: Jaquar/ Marc/ Kohler) |
| 69 | S&F in repair Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 70 | S&F in repair soap dish of chromium plated all as specified and directed. (Make: Jaquar/ Marc/ Kohler) |
| 71 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. (Make: Jaquar/ Marc/ Kohler) |
| 72 | Taking down aluminium door/ window and ventilator shutter with frame up to 2 Sqm each and re-fixing in the same opening after necessary repair like any type of lock, door closer any type (floor/door), securing glass beads, replacing handles, tower bolt, wire mesh, replacing the broken glass and other minor repair as required at site' complete all as specified and directed. |
| 73 | Taking down UPVC door shutter upto 2 Sqm each and re-fixing in the same opening after necessary repair like any type of lock ,door closer any type (floor / door), securing glass beads, replacing handles, tower bolt, wire mesh, replacing the broken glass and other minor repair as required at site' complete all as specified and directed. |
| 74 | Taking down UPVC window shutter with frame up to 2 Sqm each and re-fixing in the same opening after necessary repair like any type of lock ,sliding rail, securing glass beads, replacing handles, tower bolt, wire mesh, replacing the broken glass and other minor repair as required at site' complete all as specified and directed. |
| 75 | S & F in repair for 10 mm thick (toughened glass with frosted glass) of approved quality fixed in partition/door's/ Cubical for toilets etc. including necessary all stainless steel hardware fittings (As like frame, brackets, clits, jammers, stoppers, handles, rods etc.) complete drilled for fixing with all fitting and fixture including dismantling old glass any type complete all as specified and directed. |
| 76 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc. complete all as specified and directed. |
| 77 | M&L for Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and re-plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing wall complete all as specified and directed. |
| 78 | M&L for Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. |
| 79 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed. |
| 80 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm each complete all as specified and directed. |
| 81 | S & F anodised aluminium frame for doors, windows, ventilators / AC provision window frame with or without three track window provision etc with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 82 | S & F Anodised aluminium door shutters, powder coating of any colour, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws, including 4mm thick Glass/ wire mesh/ practical board/ 4mm thcik ACP board etc. complete all as specified. |
| 83 | S & F Anodised aluminium window and ventilator shutters, powder coating of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Note : Glass / wire mesh etc. any type paid separately) |
| 84 | S & F Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh shutter (Two nos. glazed & one no. wire mesh panels) including aluminium powder coated inner and outer frame for sliding track, bottom , sides and top weight not less than 0.75 Kg/ RM, double rebated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section and equivalent in others, numbers for sliding windows with framed shutter including aluminium allow powder coated snap type beads, handles with locking arrangement spring action and glazing clip, joint cleats, rubber gaskets, abd bush beading including all standard fittings, hinges, handles, glass and wire mesh for panels complete all as specified and as directed. |
| 85 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.5 m height made of (big series) frame 112 x 52 mm & sash 42 x 66 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.00 Sqm to 2.50 Sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.20 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge(Note: The unit rate quoted by contractor include all other connected accessories., including 5mm glass and wire mesh Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.) |
| 86 | Supply and fixing factory made UPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door up to 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass/ wire mess shall be paid separately)Note: The unit rate quoted by contractor include 8mm thick toughened glass, plain or frosted and all other connected accessories. Net Opening will be measured or payment purpose and for UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 87 | Description all as per item no 86.00 above but with Stainless steel wire mesh of 0.36mm dia & 0.46mm aperture |
| 88 | S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc. complete all as specified and directed. |
| 89 | Material & Labour for providing and fixing stainless steel (Grade 304) railing, guard bars, grills, doors, gates etc. made of hollow tubes, channels, plates, bars, flats etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing, guard bars, grills with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of the old stainless steel work or iron work all as specified and directed |
| 90 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm |
| 91 | M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cm x 8cm at the junction of roofing to vertical surfaces |
| 92 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 |
| 93 | M&L for APP based polymeric membrane with mineral granules on top surface, minimum weighting 3 kg/Sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm with bitumen primer and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.6 kg/sqm at overlapping joints with a over lap of 75mm at the sides and 100 at the ends complete all as specified incl taking down of existing roof treatment of any discription. Note: the water proofing treatment shall be carried out by the manufacturer or their authorised applicators.” Make- Asian/ STP/ IWL. |
| 94 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 95 | S& F Mild Steel work in rafter, purlin, and other connected work including special shaped washer, nut bolt and plates etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 Please Enable Macros to View BoQ information |
