|
| 1 | M&L for Water Proofing Treatment on \\"Non Approachable/Non Accessible and Approachable Roof\\" surfaces (Horizontal & Vertical surfaces) in following sequence through manufacturer/authorized applicator of the manufacturer. Complete all as specified and directed & Appicabale for Sr 01 to 06. |
| 2 | M&L for rendering 10 mm thick in cement mortar 1:4 on roof or concrete surfaces. Complete all as specified and directed. |
| 3 | M&L for applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg per Sqm. |
| 4 | M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg per Sqm including cleaning surfaces. |
| 5 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on bitumen coated surface with 100 mm overlaps shall be sealed by flame as per manufacturer's instruction. including rmoval of existing one. Complete all as specified and directed. |
| 6 | M&L for preparation of new or previously untreated APP based polymeric membrane surfaces & applying two coats of bituminous based Aluminium Paint. Complete all as specified and directed. |
| 7 | Supply only liquid water proofing compound ISI marked. Complete all as specified & as directed. |
| 8 | Demolition of Cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for Complete all as specified and directed |
| 9 | M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as spd and directed, |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 11 | Dismantling Stone slabs & tiles of any description or thickness in floors, aprons etc., laid bedded & pointed in any mortar. Complete all as specified and directed. |
| 12 | M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 13 | M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes. Complete all as specified and directed. |
| 14 | M&L for Glazed Coloured Ceramic Tiles 350 x 250 x 7 mm/450 x 350 x 7 mm thick in vertical surface such as dado/skirting/risers to steps etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 15 | M&L for Machine cut Kota stone slab 20-25 mm thick in riser of steps, skirting, tread landing ,dado & pillar over & including rendering 15 mm thick in 1:4 cement mortar, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed. |
| 16 | M&L for colour rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments complete & including 15 mm thick CM 1:4 screed bed types complete all as specified and directed. |
| 17 | M&L for Machine cut Cudapph stone slab on cooking platform/shelf 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete & including 15 mm thick CM 1:4 screed bed types complete all as specified and directed. |
| 18 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 19 | M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations complete all as specified and directed. |
| 20 | M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in floor finishes 25 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | M&L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in floor finishes 75 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. |
| 22 | M&L for 75 mm thick Cement Concrete type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in plinth protection etc & finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 23 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed. |
| 24 | M&L for Brick work with old size flyash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 25 | M&L for Brick work with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 26 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 27 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 and to be finished even and smooth without using extra cement complete all as specified and directed. |
| 28 | M&L for rendering 5 mm thick in cement mortar 1:3 on RCC ceiling surface and finished even and smooth (without using extra cement). Complete all as specified and directed . |
| 29 | M&L 10 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of oil bound distemper over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces. Complete all as specified and directed. |
| 31 | M&L for complete removal of existing treatment onplasterd brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on brick work or concrete surfaces. Complete all as specified and directed . |
| 32 | M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on newly plastered or unplastered brick work or concrete surfaces. Complete all as specified and directed . |
| 33 | M&L for applying two coat of cement based paint on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces. Complete all as specified and directed. |
| 34 | M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying three coat of white wash on prepared brick work or concrete surfaces. Complete all as specified and directed. |
| 35 | M&L for preparation of old plastered brick work or concrete surfaces & applying two coat of cement based paint on brick work or concrete surfaces. Complete all as specified and directed. |
| 36 | M&L for preparation of old plastered brick work or concrete surfaces & applying two coat of oil bound distemper on brick work or concrete surfaces. Complete all as specified and directed. |
| 37 | M&L for preparation of old plastered ceiling surfaces & applying one coat of white wash on ceiling surfaces. Complete all as specified and directed. |
| 38 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described & applying two coat of synthetic enamel paint (ordinary tint) over & including one coat of red oxide, zinc chrome primer. Complete all as specified and directed. |
| 39 | M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth & apply two coat of Synthetic enamel paint (ordinary tint) over & including a coat of pink primer. Complete all as specified and directed. |
| 40 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store. Complete all as specified and directed. |
| 41 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store. Complete all as specified and directed. |
| 42 | S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms). Complete all as specified and directed. |
| 43 | S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe. Complete all as specified and directed. |
| 44 | Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store. Complete all as specified and directed. |
| 45 | Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store. Complete all as specified and directed. |
| 46 | Supplying & Laying of 20 mm Outer Diameter, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors. Complete all as specified and directed. |
| 47 | Supplying & Laying of 25 mm Outer Diameter, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors. Complete all as specified and directed. |
| 48 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 49 | S&F of Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 50 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe-290 (Gde-E-165) complete all as specified and directed. |
| 51 | Dismantling of plain/corrugated steel sheeting, fibre glass sheet any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed. |
| 52 | S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 53 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 54 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 55 | S&F MS steel flat iron as in wind tie for roof sheet including securing bolts complete all as specified and directed. |
| 56 | Repairing sunken floor leakage as per following steps:-Surface preparation:-(i) Prior to application of Dr fixit powercrite, ensure to clean the substract which shoud be free from all the dust, foregn particles, loose aggregate and oil grease etc. This can be done with the help of scarifying, grinding water jetting and sand blasting etc.(ii) The surface should be wetted well prior to application throughly with water to get SSD condition.(iii) All the depression or pin holes/pot holes to be repaired using Dr Fixit powercrete method mortar in mixing ratio of (1 kg cement : 1.50 kg silica sand : 0.50kg of Dr Fixit powercrete).Coating application:-(i) Mix Cement with Dr. Fixit Powercrete in ratio of 1 : 0.50 ( 1 kg cement OP C53 : 0.50 Dr. Fixit Powercrete ) by weight.(ii) The mix should be stirred thoroughly until smooth homogeneous paste is obtained.(iii) Apply first coat over SSD/wet condition substrate.(iv) Apply and unroll woven glass fibre cloth evenly on the wet coating before it dries out on larger areas.(v) Using a nylon brush, apply a coat of Dr. Fixit Powercrete coating over the glass fabric so as to cover the fabric, allow 5-6 hours of air drying before application of another coat of Dr. Fixit Powercrete slurry coating over the surface.(vi) Provide polymer modified protective plaster of 15-20 mm thick over the coating to ensure safety from mechanical damage.Curing:-(i) Allow Dr. Fixit Powercrete coating to air cure for 3-6 hours after the final coat.(ii) Do not allow the rapid drying of the coating by covering the coating with help of polythene sheet in case of high humidity and windy condition.(iii) However, a moist curing after the air drying is advisable.(iv) Following the moist curing, Dr. Fixit Powercrete coating shall be allowed to air cured for 3 days before submerging it in water.Note - The above procedure is given for Dr Fixit Powercrete, any other equivalent make may please be used as per their manufacturer instruction subject to approved by Engr-in-Charge. |
| 57 | S&F in repair 15 mm bore, fancy type, chromoium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 58 | S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 59 | S&F in repair, 15 mm dia of bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. |
| 60 | S&F in repair, 32 mm bore, brass chromium plated bottle traps for Wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap & fixed complete all as specified and directed. |
| 61 | S&F in repair, 32 mm dia of bore, waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 62 | S&F in repair 100 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 63 | S&F in repair, Health Faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube & ABS wall hook including making connections & fixed in position complete all as specified and directed. |
| 64 | S&F in repair, Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed. |
| 65 | S&F in repair, Vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 66 | S&F in repair, plastic water closet seat cover, white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 67 | S&F in repair, Vitreous China squatting pan, ‘Orissa’ Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) etc complete all as specified and directed. |
| 68 | S&F in repair, Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 69 | S&F in repair, 1 mm thick, Stainless Steel Plate Rack of overall size 24 inch x 36 inch x 10 inch including fixing with rawal plug and screws complete all as specified and directed. |
| 70 | S&F in repair, 10 litre capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 71 | S&F in repair, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed. |
| 72 | S&F in repair, 125 mm size, brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 73 | S&F in repair, PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 74 | S&F in repair, brass chromium plated, tubular towel rail, 20 mm dia, 'D' type, 60 cm long between flanges etc complete all as specified and directed. |
| 75 | S&F in repair, Brass chromium plated Sink Mixer with raised 'J' shaped swinging spout (Wall Mounted Model) with connecting legs & Wall flanges for 15 mm bore of pipe. Complete all as specified and directed. |
| 76 | S&F in repair, Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 77 | S&F in repairs 600 mmx450 mm looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood or PVC and fixed to wooden plugs with chromium plated brass screws and cup washers as directed by Engr in Charge. |
| 78 | S&F in repair, toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 79 | M&L for cutting holes in brick walls exc half brick but n.exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required complete all as specified and directed. |
| 80 | M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement |
| 81 | Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 82 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed. |
| 83 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls. Complete all as specified and directed. |
| 84 | S&F 110 mm bore PVC (SWR) bends any radius. Complete all as specified and directed. |
| 85 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal. Complete all as specified and directed. |
| 86 | S&F in repair, 110 mm bore PVC (SWR) vent cowl. Complete all as specified and directed. |
| 87 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed. |
| 88 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls. Complete all as specified and directed. |
| 89 | S&F 75 mm bore PVC (SWR) bends any radius. Complete all as specified and directed. |
| 90 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal. Complete all as specified and directed. |
| 91 | S&F in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, Including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe. Complete all as specified and directed. |
| 92 | S&F 75 mm bore PVC (SWR) vent cowl. Complete all as specified and directed. |
| 93 | Taking down Chowkhats or frames not exc. 1.50 sqm each with shutters (without taking off shutters from the frame) and removing to store. Complete all as specified and directed. |
| 94 | Taking down Chowkhats or frames exc 1.50 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 95 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia & length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e., depth & width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 96 | Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum & screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter & fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as per direction of Engineer-in-Charge. Note : Stainless Steel butt hinges & necessary S.S screws shall be paid separately. |
| 97 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube as specified & directed. |
| 98 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panel ling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed. |
| 99 | S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 100 | S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 101 | S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 102 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed complete all as specified and directed. |
| 103 | Taking down old wooden/wood based particle board & S&F 18/19 mm thick high density PVC solid fibre board duly laminated 2mm thick prelaminated PVC sheet on front face (ISI mark) etc in kitchen cupboard etc. |
| 104 | S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete. |
| 105 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates , Kitchen rack etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 106 | S&F mild steel conduit curtain rod with PVC coating fancy type curten rod 20 mm dia of any colour as approved complete. |
| 107 | S&F mild steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete. |
| 108 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40 mm complete all as specified and directed. |
| 109 | S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed. |
| 110 | Providing and fixing of double rebate openable/fixed windows (Eco 4000) made of galvanized steel colour coated/powder coated (base steel as per IS 513 of \\"D\\" quality, gavanized as per lS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 mm, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50- 60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 X 20 mm and the fixed glass beading section 12x 12 mm, outer frame and mull ions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 4 mm thick plain clear glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12 mm flat at a distance 150m m c/c (pitch) etc.all as per HQ CE JZ DRG No : CEJZ/TD/980 of Sheet 1/2 & 2/2 complete all as specified and directed |
| 111 | Provinding and fixing of Ventilators Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls including including 10mm Square bars welded to 6x12 mm flat at a distance 150m m c/c (pitch) etc by means of self expanding ScrewSll as per HQ CE JZ DRG No : CEJZ/TD/980 of Sheet 1/2 & 2/2 complete all as specified and directed |
| 112 | S&F Sheet glass 5.50mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane |
| 113 | M&L Concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) |
| 114 | M&L Salt-glazed stoneware drain pipes laid in trenches & jointed as specfified of 150mm dia |
| 115 | M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces Complete all as specifed and directed |
| 116 | M&L for cement concrete 1:4:8, type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete |
| 117 | Supplyin only chain link MS galvanisd fencing, any size or type |
| 118 | Fixing only chain link fencing of mesh size 75x75mm including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all specified and directed |
| 119 | S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting,welding etc., and similar work conforming to Fe- 290 Gde E-165 complete all as specified and directed |
| 120 | S&F mild steel bolt machine made with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and one hexagonal or square but length of bolt exc 5 cms but not exceeding 10cm long dia shall be of 5 to 10mm dia complete all as specified and directed |
| 121 | M&L mild steel round bars 10mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.9mm dia all as specified conforming to Gde E-250 or Gde E 165 complete all as specified and directed |
| 122 | Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 100m or under, beyond the ead included in the rates, including loading, unloading and stacking at the destination |
| 123 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for shafts, cesspits, manholes, pier holes, etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth getting out in any type of soil complete all as specified and directed. |
| 124 | M&L for moorum / red bajri filling in, floor or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 125 | M&L Hardcore of broken stone / boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 126 | M&L for use and waste formwork for sides of pillars, posts, struts, piers, columns or stanchion. |
| 127 | M&L for use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified & directed. |
| 128 | M&L for RCC design mix M-25 using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified & directed. |
| 129 | M&L for RCC design mix M-25 using 20mm graded stone aggregate in columns, pillars, butters wall, piers , post and strut. |
| 130 | M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 131 | M&L for mild steel TMT bars 5mm dia and over upto and incl 10mm dia , cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 132 | S&F steel work in tubular trusses incl special shaped washer etc. complete using mild steel section or incl butt welded tubes conforming to IS 1161-1998 grade ST-240 |
| 133 | Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concretean d screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., conforming to Fe-290 (Gde E-165) all as specified and directed. |
| 134 | M&L framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending angles, as necessary, gusset plates, riveting etc. n exc.10 kg each brackets , conforming to FE290 gde -E 165 (brackets over 10 Kg each to be measured structural steel ) complete all as specified and directed. |
| 135 | S&F mild steel screw bolt (machine made) with square or hexagonal head at one end, screwed other, fitted with washer and one hexagonal or square n exc 5cm long and 10mm dia complete all as specified & directed. |
| 136 | S&F mild steel screw bolt (machine made) with square or hexagonal head at one end, screwed other, fitted with washer and one hexagonal or square n exc 10cm & n. exc 30cmlong and 10mm dia complete all as specified & directed. |
| 137 | M&L for preparation of new steel surfaces of any description, n.exc 10 cm in width or girth, & applying two coat of synthetic enamel paint over & including one coat of red oxide, zinc chrome primer. Complete all as specified and directed. |
| 138 | Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed. |
| 139 | M&L for Removing surplus excavated material soil distance not exceeding 250m but n.exc 500m & depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 140 | M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping ,benching,bed block for lintel band, plinth course etc and similar work including necessary form work complete all as specified and directed. |
| 141 | M&L for Cement concrete work in pavement /Hard standing of flexural strength 40 kg/ per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25cm complete all as specified and directed. |
| 142 | M&L 100mm thik PCC 1:4:8, type D2 using 40mm graded stone aggregate . |
| 143 | M&L for cement concrete 1:3:6 type C-1 (using 20mm grade stone aggregrate ) Ditto in lintels upto 1.5m clears span,cills, step seismic and other similar bands, plinth courses , lacing courses , parapets and railing upto 60cm in height , copings , kneelers apex stone , bed plates , kerbs not provided for in item 04028 , water troughs and the like including weathering , slightly rounded or chamfered angles and throating as directed. |
| 144 | Schedule of credit amount of Rs 187701.80 to be deducted during AOC Please Enable Macros to View BoQ information |
