|
| 1 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 2 | M&L for Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement (WPC to be measured separately) complete all as specified. |
| 3 | Supply only liquid Water proofing compound complete. |
| 4 | M&L for preparation of new plastered surfaces to external walls/RCC surfaces/soffits of chajjas/roof projections /cantilevers /balcony etc surfaces and applying two coats of exterior emulsion paint by using roller over and including applying wall care putty of 0.5mm to 1mm thick ( in 1/2 coats as required) complete all as specified.Note:- 1 . The second coat will be done after 1st coat checked by Engr-in-ChargeMake : Asian Paints/Berger/Nerolac (Ist Quality) |
| 5 | M&L for prepartion of new plastered surfaces of walls and applying two coat of cement based paint on external walls complete all as specified and directed.Note:- 1. The second coat will be done after 1st coat checked by Engr-in-ChargeMake : Asian Paints/Berger/Nerolac (Ist Quality) |
| 6 | M&L complete removal of existing treatment and preparation of old treated surface of walls (plastered/unplastered ) including cornices, Pilasters etc by brooming down or steel wire brushing, scraping down smoke , soot moulds , moss and efflorescent salts, trading oil and greasy spots and applying two coat of cement base paint, leaving premises clean and tidy all as specified and directed by the Engineer-in Charge.Note:- 1. The second coat will be done after 1st coat checked by Engr-in-ChargeMake : Asian Paints/Berger/Nerolac (Ist Quality) |
| 7 | All as per item No 6 above but two coat of exterior acrylic emulsion paint by using roller to wall surfaces all as specified and directed by the Engineer-in Charge. |
| 8 | Demolition of Brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 9 | M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed. |
| 10 | M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concerete complete all as specified |
| 11 | Demolition of Concrete is reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for. |
| 12 | M&L for providing factory made precast reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in landings, perforated cover slabs(for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 all as specified and directed |
| 13 | M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed. |
| 14 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitered/stopped ends etc |
| 15 | M&L for PCC (1:2:4) type B-0 using 20mm graded crushed stone agg as in coping /benching in man hole etc,finished even and smooth using extra cement incl necessary form work |
| 16 | Dismantling of Barbed wire fencing of any description and in any position complete. |
| 17 | Dismantling posts or struts (wood, steel or RCC) any section incl taking out embedded portion and making good disturbed ground (post embedded in PCC) |
| 18 | Surface dressing n exc 15 cm deep in soft/loose soil complete all as spd and directed. |
| 19 | Excavation in post hole for similar holes each n exc 0.50Cum getting out returning filling in and ramming earth around in layers nexc 25 cm watering and removed surplus soil to a distance nexc 50m and making good surface in soft/loose soil. |
| 20 | M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concrete complete all as specified |
| 21 | S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 |
| 22 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 23 | Supply only chainlink fencing any size any type etc complete all as specified and directed. |
| 24 | Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed. |
| 25 | S & F of mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of bolt n exc 5cm and dia of shank 5 to 10 cm complete |
| 26 | S & F 10 mm dia & over mild steel round or square bars Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165)fixed behind chain link fencing as straining bars etc and similar articles complete as specified. |
| 27 | S & F as in repair prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering / clading to wall, ridges, hips, valley gutter, fixed with self tapping screws Complete all as specified and directed. |
| 28 | Dismantling wrought iron or mild steel work of any description not oth-erwise provided for. |
| 29 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc and similar work conforming to Fe.290.Gde-E-165 |
| 30 | S&F for ornamental and intricate design as in gates conforming to Fe.290.Gde-E-165 complete all as specified |
| 31 | M & L for preparation of new steel surfaces exc 10cm width or girth and apply one coats of synthetic enamel paint over a coat of red oxide primer complete. |
| 32 | Preparation of old steel and iron surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 33 | ML for 18- 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 10mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 34 | Demolition of cement concrete of any description and in any position not otherwise specially provided for. |
| 35 | M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in Sub base finished even and rough complete all as specified and directed. |
| 36 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;. |
| 37 | M&L factory made rubber moulded coloured chequered tiles 30cm x 30cm x 22mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor including 15 mm thick screed bed in 1:4 complete all as specified and directed. |
| 38 | M&L for providing and Laying Premium (1st) quality straight edge, ceramic tiles WA value between 3% to 6% , flexural strength greater than 22N/mm², scratch resistance on mohs scale greater than 4 and crazing resistance of 2 cycles in area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor, 8 to 10 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc as approved matching with wall tiles, set & jointed in neat cement slurry & pointed in matching colored polymer cement based grout to match including 15mm thick screed bed of CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 39 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete |
| 40 | S&F reinforced precast cement concrete louvres and jallies, 25mm thick type B0 1:2:4 (12.50mm graded aggregate) of any shape approved set in CM 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
