|
| 1 | Excavation in trenches in soft/loose soil not exceeding 1.5 m deep and not exceeding 1.5 mtr wide and getting out including forming bottom surface to required levels/gradients/slopes for laying of cable etc. all as specified and directe. |
| 2 | Excavation in trenches in soft/loose soil exceeding 1.5 m deep and not exceeding 1.5 mtr wide and getting out including forming bottom surface to required for foundations of pole etc all as specified and directed . |
| 3 | Returning, filling in, including spreading leveling, watering and well ramming the excavated soil in layers not exceeding 25 cm thick complete all as specified and directed |
| 4 | Removal of surplus excavated soil to a distance not exceeding 50 Mtr distance and depositing as directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed |
| 5 | M & L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed. Note : Punned thickness shall be measured & Paid. |
| 6 | M&L bricks for cover underground cable with one layer of bricks using sub class 'B' bricks (Old size) laid flat across the cable complete all as specified. (Excavation and earth work will be measured separately). |
| 7 | Supply & fixing of steel tubular pole swaged type 410 SP 55 11 Mtr long complete in true vertical position in t to IS: 2713 complete with CI base plate, pole cap bolt nuts & screw with cast iron base plate, pole cap, mild steel bolt, nuts and screws complete all as specified and directetd and comprises of following work/scope : (a) M & L for paiting of pole externally with one coat of black bituminous paint (up to plating depth) and above plinth block complete collar with two coat of aluminium paint including preparation of surface and including painting of 30 cm wide bands 3 nos with synthetic enamel paint of appropriate colour in alternate layer upto the height of 1.5 m above plinth block.(b) M&L for writting letter of figures (black roman, italic as Indian) with thick syntetic enamel paint of apprised shade not exceeding 5 cm height including numbering of pole complete all as specified and direcetd Note : Excavation earth work and PCC will be mesured and paid separately. |
| 8 | Supply and fixing of steel tubular swaged pole (410 SP-31) 9 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole complete all as specified and dircetd, and comprises of following works:-(a) M & L for paiting of pole externally with one coat of black bituminous paint (up to plating depth) and above plinth block complete collar with two coat of aluminium paint over a coat of red oxide primer including preparation of surface including painting of 30 cm wide bands 3 nos with synthetic enamel paint of appropriate colour in alternate layer upto the height of 1.5 m above plinth block.(b) M&L for writting letter of figures (black roman, italic as Indian) with thick syntetic enamel paint of apprised shade not exceeding 5 cm height including numbering of pole complete all as specified and direcetd Note : Excavation earth work and PCC will be mesured separately. |
| 9 | S&F Energy saving, environmental friendly, long life , Exlusive innovative die -cast aluminium IP66 Street light luminair with high power LED as light source 90 W LED 4000K with1.5 sqmm 3 core copper conductor cable complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supply and fixing of LED floodlight 120 W made up of pressure die cast aluminum housing with toughened glass and high power LEDs and secondary lenses with IP66 protection, System efficacy 110 LPW all as specified and direcetd |
| 11 | M&L for PCC (1:3:6 ) type C-2 ( using 40 mm graded stone aggregates ) as in sub base foundation etc. complete all as specified and directed. |
| 12 | M&L for PCC (1:4:8 ) type D-2 with 40 mm graded stone aggregates for foundation of pole of complete all as specified and directed. |
| 13 | M&L for PCC (1:2:4 ) type B-1 with20 mm graded stone aggregates for coping of poles with all necessary form work complete all as specified and directed. |
| 14 | Supply , laying , connecting and testing LT 1100 volt grade electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip armoured (heavy duty) ISI marked with aluminium stranded conductor gross sectional area 16 Sqmm , 4 core laid in trenches / duct / pipe etc complete all as specified and directed . |
| 15 | S&F PVC insulated, sheathed twin core 2.5 Sqmm size copper conductor wire duly passing through the holes of existing steel poles/street light brackets including necessary connection at pole mounted street light junction box and at the street light luminaries all as specified and directed. |
| 16 | Supplying and fixing in position new PVC (Synthetic) boxes of size not less than 1000mm X 500mm X 250mm depth (with thickness not less than 4mm), made out with PVC Sheet. The box shall be provided suitable aluminium bus bar of size not less than 32x5 mm size 04Nos mounted on porcelain insulators including one No. MCB SP of 16 Amps and connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminium lugs etc fixed on pole using 32x5 mm GI clamps, nuts, bolts & washers etc complete all as specified and directed. |
| 17 | Demolition for cement concrete/road in ground floor and paving n. exc 15 cm thickness below or above ground level including removal of rubbish to a distance exc 500 mtr etc complete all as specified and directed |
| 18 | Supply & Fix 15 mm bore light grade galvanized iron tubing ISI marked including all fittings etc fixed on pole including clamps, nut and bolts protection pipe for street light cable from junction box to street light complete all as specified and directed Please Enable Macros to View BoQ information |
| 19 | Supply & Fix 15 mm bore light grade galvanized iron tubing ISI marked including all fittings etc fixed on pole including clamps, nut and bolts protection pipe for street light cable from junction box to street light complete all as specified and directed Please Enable Macros to View BoQ information |
