|
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority:GE (AF) HASIMARA Name of Work : REPAIR/MAINT OF OHT & WATER SUPPLY MES INSTALLATIONS AT KV, ARJAN, 10 AFH, RS AND TIPNIS AREA AT AFS HASIMARA Contract No: GE/HAS/ /2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE 'A' (BoQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Providing and fixing double scaffolding system (cup lock type) on the exterior side for high-rise building. made with 40mm dia M.S. tube at 1.5m center-to-center, joined with cup & lock system, including M.S. tube challies, M.S. clamps, staircases, anchoring to the building, safe working platform, maintenance, and safe removal after completion of work as approved by the Engineer-in-charge, complete all as specifed and directed. |
| 3 | Dismantling removing all unsound concrete, plastered material by chipping/chiseling gently at all effected and adjoining areas of concrete etc. till sound surface is reached all various locations in building (upto 30 M height of OHT) subsequently cleaning the surfaces by hair brush and air blower and removing rubbish off the premises and disposing at the dumping site as approved by local authorities, complete all as specifed and directed. |
| 4 | Removing of concrete all around reinforcement bar upto 12 mm dia and over from behind the reinforcement bars average 25mm (but not less than 15mm air gap) by manual methods (using wire brushing chiseling etc.) and applying chloride free rust removing chemical on rusting steel reinforcement bar and removing all rust from steel reinforcement bar by emery paper and cleaning the area thoroughly by water and allow it to dry and totally rust free of reinforcement bar all as complete as per manufacture’s instruction (upto 30M height of OHT), complete all as specifed and directed. |
| 5 | Material and Labour for preparation of existing reinforcement surface by brush and application of two component epoxy zinc rich primer on existing reinforcement surface of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 and maximum coverage area 5.00 Sqm per litre (upto 30 M height of OHT), complete all as specified and directed. |
| 6 | Material and labour for introducing new reinforcement bars upto 12 mm dia and over for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150rnm and upto 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc. (upto 30 M height of OHT), complete all as specifed and directed. |
| 7 | Material and labour for supply, mixing and placement of micro-concrete cement based prepacked single component chloride free, sulphate free, non-shrink, free flow. elf compacting, ready to use after mixing water in specified proportion and in required thickness over a coat of epoxy resin bonding agent as per manufacture's instruction including necessary form work. Compressive strength (ASTMC 109, cm cube) of 50 MPa (Minimum) at 28 days including application curing compound concrete at various locations in Bldgs complete (upto 30 M height of OHT), complete all as specifed and directed. |
| 8 | Material and labour for providing and applying two component structural grade polymer modified reinforcement mortar upto a thickness of 30mm over a coat of epoxy resin bonding agent as per manufacture's specification. The cured mortar shall achieve a minimum compressive strength of 12N/mm2 in a day & 45 Nimm2 (Minimum) in 28 days with Flexural strength 8N/mm2 in 28 days Chloride diffusion coefficient shall be Nil after 24 hours when tested by Accelerated electrochemical chloride ion diffusion test method and the depth of carbonation shall be Nil after 24 hours when tested by Accelerated carbonation test, in addition to this percentage of water absorption should be 0.45 after 24 hours in immersion test at various locations in bldgs (upto 30 M height of OHT), complete all as specifed and directed. |
| 9 | Material and labour for application of high efficiency polymeric resin base film forming curing agent/compound over concrete surface with maximum coverage area 5.00 Sqm per litre or as per manufacturer's instruction (upto 30 M height of OHT), complete all as specifed and directed. |
| 10 | S&F shear connector of 8mm dia & requisite length on the surface to be repaired for the bonding between old and new concrete as per the locations as directed by the Engr-in-Charge. The shear connectors shall be of L shape and welded with existing reinforcement at least 100mm in length @ 200mm c/c both horizontally and vertically followed by coat of epoxy Zinc primer as per the specification mentioned (upto 30 M height of OHT), complete all as specified and directed. |
| 11 | M & L for providing and inserting mild steel shear key bars/levelling gauges of required length and diameter in reinforced/plain concrete for drilling suitable holes in RCC Slab/ wall column/ beams toa depth as directed for anchoring steel reinforcement bars including washing with water inserting lokfix 'E' of Fosroc or equivalent in the holes at various location in bldgs complete all as per manufacturer's specification (upto 30 M height of OHT), complete all as specified and directed. |
| 12 | M&L for providing grouting in RCC walls and slabs by drilling holes @300 mm c/c upto half of the wall depth in zigzag manner using a drilling machine and fixing a nozzle of 20mm dia, for injecting of epoxy grout till the refusal of injected grout material (grouting operation pressure shall be in between 2 to 4 Kg per Sqcm) follwed by cutting the exposed nozzle so as to make the wall/slab free from the grouting pipe and to seal the gap with polymer modified mortar (upto 30 M height of OHT), complete all as specified and directed. |
| 13 | M&L for applying two coats of anti carbonation coating as per manufacturer's specification of approved brand, manually using brushes on the hardened concrete/plastered surfaces after cleaning the surface and removing all loose particles, deposits etc over and including a coat of primer (upto 30 M height of OHT), complete all as specified and directed. |
| 14 | Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, including disposal of debris and rubbish to a distance not exceeding 100m, complete all as specified and directed. |
| 15 | M & L for rendering 20mm thick in two coats (15mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately as 'supply only') |
| 16 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed. |
| 17 | M&L 15mm thick rendering in CM (1: 6) on fair faces of brick work or concrete surfaces finished surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 18 | M&L 5mm thick rendering in CM (1:3) on ceiling surfaces/ chajja etc finished even and smooth without using extra cement, complete all as specified and directed. |
| 19 | M&L for preparation of newly plastered surfaces of wall and applying two coats of 100% premium acrylic weather proof exterior emulsion paint, alkali & fungal resistance of approved coloure and shade and including primming coat of exterior emulsion primer as per manufacturer's instructions, complete all as specified and directed. |
| 20 | M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening, complete all as specified and directed. |
| 21 | M & L for preparing newly plastered surfaces of ceiling/chajja etc. and applying three coats of white wash, complete all as specified and directed. |
| 22 | M&L for complete removal of existing treatment of wall surfaces and applying 1 to 1.5mm thick wall care putty in one coat or more coats to obtain smooth surface including making good any undulations on the surfaces, preparing the surfaces smooth and even by using sand paper, complete all as specified and directed. |
| 23 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and directed. |
| 24 | M&L for preparation of old plastered surfaces of wall and applying one coat of oil bound distemper, complete all as specified and directed. |
| 25 | M & L for preparing old decorated surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot and applying one coat of distemper oil emulsion, complete all as specified and directed. |
| 26 | M & L for complete removal of existing treatment of old decorated surfaces of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying two coats of distemper oil emulsion, complete all as specified and directed. |
| 27 | M&L for preparation newly plastered surfaces of walls and applying one coat of 100% premium acrylic emulsion paint, having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior emulsion primer @ 0.90 litre/10 Sqm, complete all as specified and directed. |
| 28 | M&L for preparation old plastered surfaces of walls and applying one coat of 100% premium acrylic emulsion paint, having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm , complete all as specified and directed. |
| 29 | M&L for preparation old plastered surfaces and applying two coats of 100% premium acrylic emulsion paint, having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm , complete all as specified and directed. |
| 30 | M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed. |
| 31 | M & L for complete removal of existing treatment of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality), complete all as specified and directed. |
| 32 | M & L for preparation of old painted steel or iron surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed. |
| 33 | M & L for complete removal of existing treatment of old painted steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint (1st grade quality), complete all as specified and directed. |
| 34 | Taking down 15mm bore steel water tubing and connection from wall/ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and as directed. |
| 35 | Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed.(Note : Serviceable steel tube obtained from taking down shall be re-used) |
| 36 | S&F steel water tubing and connection, medium grade, 15mm bore with all fitting fixed to wall and ceiling or laid in floors, complete all as specified and directed. |
| 37 | Taking down 20mm bore steel water tubing and connection from wall/ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and as directed. |
| 38 | S&F steel water tubing and connection, medium grade, 20mm bore with all fitting fixed to wall and ceiling or laid in floors,, complete all as specified and directed. |
| 39 | Re-fixing old steel tubing and connection, 20mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed.(Note : Serviceable steel tube obtained from taking down shall be re-used) |
| 40 | S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed, compelete all as specified and directed. |
| 41 | S&F in repair CP pillar tap, 15mm bore, cast copper alloy, fancy type, chromium plated, capstan head, screwed down high pressure with or without lettered “Hot’ or “Cold” with long screwed shanks and fly nuts screwed for iron pipe and fixed, complete all as specified and directed. |
| 42 | S&F in repair 15mm bore stop cock, chromium plated, cast copper alloy, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or union and fixed, complete all as specified and directed. |
| 43 | All as per item No 41.00 here-in-before but fancy type, chromium plated with long shank and cup (concealed type), complete all as specified and directed. |
| 44 | S&F in repair 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 45 | S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (wight not less than 210 gm), complete all as specified and directed. |
| 46 | S&F rotational moulded polyethylene water storage tanks, (made of 100% virgin and food grade plastic), triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1996, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding taking down old unserviceable water tank of any capacity, complete all as specified and directed. |
| 47 | S&F in repair 32mm waste coupling of PTMT (half or full threaded) suitable for WHB (minimum weight -45 gms), complete all as specified and directed. |
| 48 | S&F in repair 140mm size grating round of PTMT (minimum weight 50 gm), complete all as specified and as directed. |
| 49 | S&F in repair shower rose 125mm size, brass, chromium plated, with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed. |
| 50 | S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed. |
| 51 | S & F in repairs, 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends, complete all as specified and directed. |
| 52 | S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with inlet, ball valve, float and handle, 32mm dia flush pipe polyethylene or PVC including brackets and connection to pipe, complete all as specified and directed. |
| 53 | S&F in repair internal assembly including valveless syphon for 10 ltrs capacity PVC flushing cistern, complete all as specified and directed. |
| 54 | S&F in repair handle for 10 ltrs PVC flushing cistern, complete all as specified and directed. |
| 55 | S&F in repair inlet ball valve for 10 ltrs PVC flushing cistern, complete all as specified and directed. |
| 56 | S&F in repair float for 10 ltrs PVC flushing cistern, complete all as specified and directed. |
| 57 | S&F in repair of 32mm size PVC flexible waste pipe for wash hand basin, 800mm long, complete all as specified and directed. |
| 58 | S&F in repair of 40mm size PVC flexible type for sink, 800mm long, complete all as specified and directed. |
| 59 | S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) incl \\"P\\" or \\"S\\" trap including provision of lime concrete bedding, complete all as specified and directed. |
| 60 | S & F in repair vitreous china wash down water closet pan (pedestal pattern), white (EWC) including plastic seat of same colour of WC and cover and mild steel chromium plated hinginh device, complete all as specified and directed. |
| 61 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 62 | S&F in repair vitreous china ware wash hand basin white, flat back, size 550 x 400mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand including pedestal, complete all as specified. |
| 63 | S&F in repair towel rail, 60cm long PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and directed |
| 64 | S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 63mm, complete all as specified and directed. |
| 65 | S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm, complete all as specified and directed. |
| 66 | M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 67 | S&F in repair tank cover suitable for rotational moulded polyethylene water storage tanks of any capacity, complete all as specified and directed. |
| 68 | S&F in repair 2nd class hardwood plain fillets, square, ractangular or triangular in section area exc.13 Sqcm & n. exc. 25 Sqcm clean sawn, secured with nails, complete all as specified and directed. |
| 69 | S&F in repair 15mm thick, 2nd class hard wood boarding, clean sawn with butt joints fixed with nails in any situaion as shelves, partitions and shelves of built-in-cupboard, book cases and similar work to replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc, complete all as specified and directed. |
| 70 | M&L preparation of new or previously untreated wooden surface any description not otherwise described and exc 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and as directed. |
| 71 | S & F in repair ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed. |
| 72 | S&F in repair 100mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 73 | S&F in repair 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 74 | S&F 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 75 | S&F in repair 200mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 76 | S&F in repair 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 77 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 78 | S&F in repair 75mm size MS butt hinge, medium weight, cold rolled, mild steel, complete all as specified and directed. |
| 79 | S&F 100mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 80 | S&F in repair 100mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 81 | S & F in repair continuous (piano) hinges,mild steel, bright finish or electrogalvanised width of flap 30mm (when open) bright finish or electro galvanised, complete all as specified and directed. |
| 82 | S&F 150mm long aluminium handle, fabricated type, anodised, complete all as specified and directed. |
| 83 | S&F in repair 150mm long extruded aluminium alloy handle, cast type, anodised, complete all as specified and directed. |
| 84 | S&F in repair 100mm long extruded aluminium fabricated handle, cast type, anodised, complete all as specified and directed. |
| 85 | S&F in repair mild steel handles for MS windows/vents 75mm long suitable for left/right hand including fixing nut & bolts, complete all as specified and directed . |
| 86 | S&F in repair mild steel casement stays size 300mm with hinged joint and two plates with studs suitable for MS windows and vents, complete all as specified and as directed . |
| 87 | S&F in repair 75mm hasp & staple, safety type, aluminium anodised with mild steel hing pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 88 | S&F in repair 25mm dia curtain rod mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed. |
| 89 | S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 90 | Hacking out old broken glass any thickness size quality or description from metel frame/aluminium frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed. |
| 91 | M&L for sheet glass, 3mm thick, ordinary quality and glazing with oil putty in sqare n. exc. 0.5 sqm in each pane, complete all as specified and directed. |
| 92 | All as per item No. 90.00 here-in-before but frosted on one side, complete all as specified and directed. |
| 93 | Taking down, repair to aluminium doors, windows, of size exc. 1 Sqm but not exc. 2 Sqm etc by replacing its faulty parts i.e. rollers, hinzes, handles, lock to bring its functional conditions and refixing in the same position, complete all as specified and directed.(Note : Glass shall be measured and paid seperately) |
| 94 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 140mm, fixed on floor, complete all as specified and directed. |
| 95 | S&F in repair 600mm x 450mm bevelled edge mirror made of selected quality sheet glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 96 | S & F in repair 2mm thick ruberised door seal, width exc 30mm but n.exc 50mm, fixed with screw, complete all as specified and directed. |
| 97 | Resecuring or easing and adjusting without taking down shutters of any description n. exc. 1 Sqm each, complete all as specified and directed. |
| 98 | Resecuring or easing and adjusting without taking down Shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each, complete all as specified and directed. |
| 99 | M & L for plastering in patches (n. exc. 1 Sqm) to wall, ceiling and applying surface finishes etc, complete all as specified and directed. Note : Quoted rate shall deemed to be included taking down cement plaster, applying adjacent finishes, removel of debris and cleaning the area. |
| 100 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backin), removing serviceable tiles to store and rubbish off the premises, complete as specified and directed. |
| 101 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 102 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 103 | All as per item No 101.00 here-in before but as in skirting/dado over and including rendering 10mm thick in CM (1:4) as backing coat to receive wall tiles, complete as specified and directed. |
| 104 | M&L glazed ceramic coloured tiles in vertical surface 350 x 250 x 7mm/450 x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 105 | Demolition of unreinforced cement concrete in ground floors and pavings, any description (below or above ground level) including removing of debris from site of work, complete all as specified and directed. |
| 106 | M&L for 100mm thick PCC (1:2:4) type B- 2 (using 40mm graded crushed stone aggregate) as in floors, pavings, hardstanding etc., complete all as specified and directed. |
| 107 | M&L for 75mm thick PCC (1:4:8) type D2 (40mm grade crushed stone aggregate) as in sub base floor and similar works, complete all as specified and directed. |
| 108 | M&L for chequred cement concrete tiles 30cm x 30cm x 20mm thick set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 109 | M&L for chequred cement concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 110 | M&L for 60mm thick machine pressed precast concrete coloured interlocking paver block, any shape and size, fixed with grey cement and pigment, confirming to IS 15658-2006, M-35 grade, complete all as specified and directed. |
| 111 | M&L for sand filling under floors or in foundations or below paver block etc. (average 50mm thick) including watering and consolidation, complete all as specified and directed.(Note : Consolidation thickness shall be measured for payment.) |
| 112 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed |
| 113 | M&L for machine cut kota stone slab flooring and shelves 20-25mm thick laid over cement screed bed of 15mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 114 | M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. Note: Kota stone slab to be provided to treads of steps shall be in one piece. |
| 115 | M&L for rounding to edges of stone slabs kota stone/marble one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 116 | Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering, complete all as specifed and directed. |
| 117 | Fixing only plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof covering, complete all as specifed and directed.(Note : Serviceable sheet obtained from dismantling shall be re-used) |
| 118 | S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed. |
| 119 | S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed. |
| 120 | Taking down chowkat with shutter (without taking off shutter from the frame) exc. 1.5 Sqm but n.exc. 4 Sqm each and removing from site of work, complete all as specified and directed. |
| 121 | Taking down chowkat with shutter (without taking off shutter from the frame) n.exc. 1.5 Sqm each and removing from site of work, complete all as specified and directed. |
| 122 | Taking down shutter of any description exc 1 & n. exc. 2 Sqm each, complete all as specified and directed. |
| 123 | S&F 125 x 60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 124 | S&F 105 x 60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 125 | M & L PCC type B-1 (1:2:4) type B-1 (using 12.5mm graded crushed stone aggregate) cast in situ in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 126 | S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 127 | S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, complete all as specified and directed. |
| 128 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet. to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, as per specification & drawing, complete all as specified and directed. |
| 129 | S & F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, complete all as specified and directed. |
| 130 | M&L 35mm thick 2nd class hardwood factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particale board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 131 | S&F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 132 | S&F mild steel flat as in hold fast, wall ties, plain angle, clean for securing purline to wood trusses, conforming to Fe 290 Gde E-165, complete all as specified and directed. |
| 133 | M&L for 4mm thick pre-painted E-fibre board, designer/decorative, fixed or laid/inserted to GI snap grid frame size 605mm x 605mm work for false ceiling hangers with 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long including necessary dismentaling of existing unserviceable ceiling boards of any thickness including cover fillets, complete all as specified and directed. |
| 134 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 135 | S&F steel windows with side hung shutters (ISI marked), factory fabricated including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed. |
| 136 | S&F steel windows with side hung shutters (ISI marked), factory fabricated including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/ painting required, complete all as specified and directed. |
| 137 | S&F steel ventilator with top hung shutter (ISI marked), factory fabricated including hinges, steel peg stay including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed. |
| 138 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe 410W (Gde E-250) complete all as specified and as directed. |
| 139 | M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) including two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed. |
| 140 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. including powder coating (minimum thickness of powder coating 50 micron), complete all as specified and directed. |
| 141 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. powder coating of any colour (thickness or powder coating not less than 50 micron), complete all as specified and directed.(Note : Glass for glazing shall be measured and paid seperately). |
| 142 | Note: An amount of Rs.45,250.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
