|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed |
| 3 | Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately), complete all as specified and directed |
| 4 | M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in type C1 (1:3:6) (20mm graged stone aggregate) and setting in mortar (1:6) including demolition of old PCC Block walling complete all as specified and as directed |
| 5 | Demolition and Reuse of demolished pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in type C1 (1:3:6) (20mm graged stone aggregate ) and setting in mortar (1:6) Block work built in cement mortar 1:6 Complete all as specified and directed Note:- Serviceable PCC Block obatined from demolition of PCC Block work shall be re-used after cleaning under this item. |
| 6 | M&L brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 including demolition of old brick work complete all as specified and directed |
| 7 | Demolition and Reuse of demolished brick work built in cement mortar 1:6 Complete all as specified and directed Note:- Serviceable bricks obatined from demolition of brick work shall be re-used after cleaning under this item. |
| 8 | M&L for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 Including demolition of Old Stone masonary complete all as specified and directed. |
| 9 | Demolition and Reuse of demolished stone work built in cement mortar 1:6 Complete all as specified and directed Note:- Serviceable stone masonary obatined from demolition of Stone mansonary shall be re-used after cleaning under this item. |
| 10 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression not exc. 40mm on face from a straight edge complete all as specified and as directed |
| 11 | Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar, complete all as specified and directed |
| 12 | M&L for raised pointing to random or polygonal rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and directed. |
| 13 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500mm complete all as specified and directed. |
| 14 | M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and surfaces has to be finished even and smooth with out using extra cement complete all as specified and directed |
| 15 | M&L for cement concrete Type C2 1:3:6 (40mm graded aggregate) in surface channels and drains, complete all as specified and directed |
| 16 | Material and labour for cement concrete 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in foundation, filling and mass concrete including demolition of old existing cement concrete in ground floors and pavings complete all as specified and as directed by Engr-in-charge. |
| 17 | Material and labour for 100mm thick cement concrete type B-2 1:2:4 using 20mm graded crushed stone aggregate as in path/floor finished fair even and smooth without using extra cement, laid in alternate panels of size not exc 4 sqm each including bitumen filling in joints complete all as specified and as directed by Engr-in-Charge. |
| 18 | Material and labour for cement concrete 1:2:4 tye B-1 (Using 12.5mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-charge. |
| 19 | M & L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in bays n. exc. 2m in length and joints filled with bitumen mastic 1:3 including demolition of old cement concrete in ground floor complete all as specified and directed |
| 20 | M&L for reinforced concrete pipes, class NP-2, laid and jointed with collars of 300 mm bore of pipe including demolition and breaking up reinforced concrete ) set in cement mortor complete all as specified and directed. |
| 21 | M&L for reinforced concrete pipes, class NP-2, laid and jointed with collars of 450 mm bore of pipe including demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor complete all as specified and directed. |
| 22 | M&L for RCC M-30 (Design Mix) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed |
| 23 | Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 24 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed |
| 25 | M&L for formwork to edges of concrete flats,floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished flat surface complete all as specified and directed. |
| 26 | S&F in repair to Type B1 1:2:4 (20mm graded aggregate) precast moulded reinforced cement concrete facorty made precast moulded and vibo compacted perforated drain cover slab with necessary handles of sizes 850x450x100mm medium duty confirming to IS -12592-2002 placed in position wherever required all as directed. Note :- Manhole cover shall be of \\"BMC Pattern \\" precast slab as in RMC M30 obtained from approved manufacturer complete all as specified and directed |
| 27 | S&F in repair to Type B1 1:2:4 (20mm graded aggregate) precast moulded reinforced cement concrete facorty made precast moulded and vibo compacted perforated drain cover slab with necessary handles of sizes 1000x450x100mm medium duty confirming to IS -12592-2002 placed in position wherever required all as directed. Note :- Manhole cover shall be of \\"BMC Pattern \\" precast slab as in RMC M30 obtained from approved manufacturer complete all as specified and directed |
| 28 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 29 | M&L for extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 30 | M&L for extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 31 | Cleaning of open drains having any inner girth and depth by removing mud, sludege silt, garbage, debries, sludge, vegitation etc., and 1m both side of drain also clear as vegitation and levelling the earth work and removing debrish by manually or machanically form out of MoD land complete all as specified and as directed by Engr-in-charge. |
| 32 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, cills, dado, skirting etc. laid bedded & pointed in any mortar complete all as specified and as directed. |
| 33 | M&L for Chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with gray cement and pigments in any colour machine preassed glazed , over cement screed bed 15mm thick cement motor 1:4 all as specified and as directed by Engr-in-charge.make nitco/arena or equivalent all as specified and directed by Engr-in-Charge. |
| 34 | M&L for sand filling under paver blocks including spreading levelled watering and well ramming in layer not exc 25 cm complete all as specified and directed. |
| 35 | M&L machine pressed precast concrete interlocking paver block (Reflective type) in any shape and size comfirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement with pigment including taking down old Interlocking tile /slab complete all as specified and directed. |
| 36 | M&L for taking out old existing interlocking paver blocks any thickness, size & type from the existing location including snad dust, stacking properly the serviceable tiles for reuse; removal of the unserviceable materials & disposal to low lying areas at a distance not exceeding 250m and relaying the paver blocks with and including by providing 50mm thick stone dust cushion and joints filled with sand etc. complete all as specified and directed. |
| 37 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 38 | S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 39 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed Please Enable Macros to View BoQ information |
