Tender For Repairs To 25 Hp Motor Of Hc Pump Unit I, Starter Of Pumping Unit I Along With Other Allied Works At Lis Rathana. , Decoupling Of 5 Cusec Pump Of Hc Pump Unit No I From Motor And Then Dismantling The Motor And Pump From The Base Frame. Ca, Jammu-Jammu And Kashmir
TDR : 55655882
Tender Notice
BOQ
4 Days Left
Jammu
Jammu And Kashmir
Tender For Repairs To 25 Hp Motor Of Hc Pump Unit I, Starter Of Pumping Unit I Along With Other Allied Works At Lis Rathana. , Decoupling Of 5 Cusec Pump Of Hc Pump Unit No I From Motor And Then Dismantling The Motor And Pump From The Base Frame. Ca
Repairs to 25 HP motor of HC pump unit I, starter of pumping unit I along with other allied works at LIS Rathana.
2
Decoupling of 5 cusec pump of HC pump unit no I from motor and then dismantling the motor and pump from the base frame. Carriage & shifting of dismantled motor of Lift irrigation station Rathana on head load through path in fields to roadside using manual labour and then to workshop by carriage vehicle. Repairs to 25 HP motor of pumping unit no I of lift irrigation station Rathana by extracting out old damaged winding manually and cleaning of stator slots. Complete rewinding of the stator by using standard copper wire of requisite gauge. Varnishing after rewinding of stator. Repair to rotor shaft by way of metal filling with welding, turning and finishing to required size. Providing and fitting of new bearings-2 no’s on driving and non driving ends of the motor, bearing plates- 2 no’s, end terminals, nuts and bolts.Job includes cost of material, labour charges, fitting and installation charges of motor at site. The firm should quote rate including the rebate on old copper scrap. Replacement of coupling pulley of pumping unit no I by way of fabrication of new coupling set as per sample and according to the size of motor and pump shaft. Providing and fitting of 8 no’s new coupling nuts & bolts, rubber bushes& key way.Repair to panel cum starter of 25HP of pumping unit I at LIS Rathana by way of replacing protection relay, replacing of damaged 01 no contractor. Making all the electric connections and testing the panel on partial/full loadRepair to 200 mm diameter foot valve of pumping unit no I by way of dismantling parts. Cleaning of all internal parts to remove silt and rust. Fabrication of foot valve plate as per size, new leather washer, hinge pin, new nuts & bolts. The job includes dismantling and fitting it with foot valve at the end of suction pipe. Back shifting after carrying out repairs of motor, foot valve & starter to site. The job includes loading, un-loading, fitting, testing, manual labour, carriage charges of vehicle (to & fro), tools & tackles etc. Complete jobNote:- The tenderers are requested to visit the site and quote the rate including rebate on old parts as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.
3
Rebate on Old Parts Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
