|
| 1 | Removing dry or oil bound distemper, waterproofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 2 | Repairs to plaster of thickness of 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of walls complete including disposal of rubbish to the dupming ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand)with cement mortar 1:4 (1 cement : 4 coarse sand) |
| 3 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 4 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 5 | 1 mm thick |
| 6 | 2 mm thick |
| 7 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface complete job |
| 8 | Distempering with Oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 9 | Painting with premium acrylic emulsion paint of interior grade having VOC content less than 50grams/litre of approved brand and manufacture, including applying additional coats wherever required. in patches two or more coats in approved colour and shade. |
| 10 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 12 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 13 | Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) |
| 14 | Finishing walls with textured exterior paint of required shade: Old work (two or more coats on existing cement paint surface applied @ 3.28 ltr/10sqm) |
| 15 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 16 | Finishing walls with textured exterior paint of required shade: Old work (two or more coats on existing cement paint surface applied @ 3.28 ltr/10sqm) |
| 17 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 18 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorophriphos / Lindane emulsifiable concentrate of 20% |
| 19 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment. Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor: |
| 20 | Providing and fixing indoor louvers/ panelling( water proof, termite proof, anti corrosive, no polishing required) for walls decors PVC make of approved design and make upto a height of 5 feet including skirting and beading , fixing,nails, screws, wastage complete job. |
| 21 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge |
| 22 | Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in- charge. |
| 23 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive waysor light traffic parking etc, of required strength, thickness & size/ shape,made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern |
| 24 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) |
| 25 | Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cutgranite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in Charge. 18 mm thick |
| 26 | Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 Coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement |
| 27 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. |
| 28 | 25mm thick with 12.5 mm nominal size stone aggregate |
| 29 | 40mm thick with 20 mm nominal size stone aggregate. |
| 30 | 50 mm thick with 20mm nominal size stone aggregate |
| 31 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown |
| 32 | Providing and fixing of Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (300x450) |
| 33 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design Marble work |
| 34 | Granite work |
| 35 | Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures. |
| 36 | Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineerin-Charge. a. 18 mm thick Italian Marble stone slab, Perlato, Rossoverona, Fire Red or Dark Emperadore etc. |
| 37 | Providing and fixing machine cut, mirror / egg shell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with |
| 38 | Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab, Perlato, Rossoverona, Fire Red or Dark Emperadore etc. |
| 39 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 40 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm) |
| 41 | Renewing glass panes, with wooden fillets wherever necessary :Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm) |
| 42 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm With 2nd class teak wood beading 62x19 mm |
| 43 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 44 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part-I : 2011 (Board with BIS certification marks)12.5 mm thick tapered edge gypsum moisture resistant board |
| 45 | Repair of Kota Stone/granite / dholpur stone by way of removing broken pieces and replacing it with new one along with mortar below, grinding and polishing complete job including scaffording wherever required. Repair area less than 1.8 sqm. |
| 46 | Repair of Tiles by way of removing broken tile pieces and replacing it with new one along with mortar below, complete job. Repair area less than 1.8 sqm. |
| 47 | Repair of Bed along with necessary ply changing/ legs replacement alon with necessary fixing with fevicol and nails etc complete job. |
| 48 | Repair of Side Table along with changing of drawer channels with necessary fixing with polishing, fevicol and nails etc complete job. |
| 49 | Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning anyGI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 50 | Labour engaged for cleaning of roofs & courtyard area of staff qtrs by collecting leaves and other waste material anddismantling works of all kinds. |
| 51 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm. |
| 52 | Engaging carpenter for day to day repairs to woodwork like doors, windows etc |
| 53 | Engaging welder for day to day repairs like doors, windows etc |
| 54 | Engaging plumber for day to day sanitary repairs etc |
| 55 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 56 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase |
| 57 | Providing and fixing of Asbestos sheets roofing 6 mm thick and fixing with G.I. pr J hook bolts and nuts 8 mm dia G.I. plain washers complete. |
| 58 | Providing and fixing of fibre sheet on door(meshed)/chajjas 4mm thick with nails and screws complete job. |
| 59 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm. |
| 60 | P/F overhead counter cabinets madeout of 19mm thick commercial board, 6mm thick ply on backside and all inside/outside surfaces fitted with sunmica and piano hinges of standard quality incld. Handles, tower bolts and all hardware fittings complete job. |
| 61 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class kail wood. |
| 62 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm |
| 63 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below |
| 64 | Providing & fixing cupboard made out of 19mm thick commercial board & 6mm ply on back ISI marked of standard quality as approved) all inside surface finished in laminate 0.8 mm thick of approved shade & quality, and external surface lipped with veneer and finished with melamine polish , complete in all respects including all hardware fittings, handles, hinges of approved brand |
| 65 | Providing and fixing of sanitary fittings , fixtures complete job. |
| 66 | Polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank terrace (at all floor levels). |
| 67 | Water tank cover |
| 68 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and firtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, conplete in all respect as per directions of Engineer in-Charge |
| 69 | Polymer cistern (parryware or equivalent) |
| 70 | Wc seat cover (Parryware or equivalent) |
| 71 | Wc seat cover (Jaquar) |
| 72 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:- |
| 73 | Internal work-Exposed on wall :- 15mm nominal bore(medium) jindal/ prakash/surya or equivalent |
| 74 | 20mm dia. Nominal bore medium ( Jindal/ prakash/surya or equivalent) |
| 75 | 25mm dia. Nominal bore medium ( Jindal/ prakash/surya or equivalent) |
| 76 | Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: |
| 77 | 15mm nominal bore ( medium) Jindal, prakash |
| 78 | 20mm dia. Nominal bore medium ( Jindal/ prakash/surya or equivalent) |
| 79 | Providing and fixing G.I. pipes complete with G.I. fittings excludingtrenching and refilling etc. (external work) |
| 80 | 15mm nominal bore(medium) jindal/ prakash/surya or equivalent |
| 81 | 20mm dia. Nominal bore medium ( Jindal/ prakash/surya or equivalent) |
| 82 | 25mm dia. Nominal bore medium ( Jindal/ prakash/surya or equivalent) |
| 83 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. |
| 84 | 15 mm and 20 mm dia. G.I. Pipes |
| 85 | 25 mm and 32 mm dia. G.I. Pipes |
| 86 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work exposed on wall |
| 87 | 15mm nominal outer dia pipes |
| 88 | 20mm nominal outer dia pipes |
| 89 | 25mm nominal outer dia pipes |
| 90 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc |
| 91 | 15mm nominal outer dia pipes. |
| 92 | 20mm nominal outer dia pipes |
| 93 | External work including trenching, |
| 94 | 15 mm nominal outer dia pipes. |
| 95 | 20 mm nominal outer dia pipes. |
| 96 | 25 mm nominal outer dia pipes. |
| 97 | Providing and fixing PVC pipe embedded in 1: 5: 10 inclu. trenching and refilling and making good the floor and wall complete. |
| 98 | 110mm nominal bore (medium) supreme , prakash or equivalent |
| 99 | 150mm dia. Nominal bore medium |
| 100 | 200mm dia. Nominal bore medium |
| 101 | Providing and fixing PVC pipes including all fittings .supreme , prakash or equivalent(external work) |
| 102 | 110mm nominal bore (medium) |
| 103 | PVC Tee 4\\" |
| 104 | PVC Door bend 4\\" |
| 105 | PVC Socket 4\\" |
| 106 | PVC Elbow 4\\" |
| 107 | PVC P-trap 4\\" |
| 108 | 75mm dia nominal bore(medium) |
| 109 | PVC Elbow 3\\" |
| 110 | PVC Door bend 3\\" |
| 111 | PVC Tee 3\\" |
| 112 | PVC Socket 3\\" |
| 113 | PVC trap 3\\" |
| 114 | Long bend |
| 115 | Long body bibcock (Jaguar or equivalent) |
| 116 | Washbasin (Parryware or equivalent) 20\\"x16\\" |
| 117 | Pedestal-Long (Parryware or equivalent |
| 118 | Long body bibcock (Parry ware or equivalent) |
| 119 | Shory body bibcock (Parry ware or equivalent) |
| 120 | Angular stop cock with wall flange (Jaquar or equivalent) |
| 121 | Angle valve (Parrayware or equivalent ) |
| 122 | Waste pipe |
| 123 | Wall mixer (Jaguar ) 3-in-1 system |
| 124 | Wash basin mixer (Parryware or equivalent ) |
| 125 | Wash basin mixer (Jaguar ) |
| 126 | Waste coupling waste coupling 32mm size full Thread with 130mm height |
| 127 | Ballcock (heavy)1 inch DRP,prayag or equivalent |
| 128 | Sink mixer with regular swinging spout (Jaquar or equivalent) |
| 129 | Robe Hook (Jaquar or equivalent) |
| 130 | Single Lever Exposed Parts Kit of Hi-flow Diverter Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly |
| 131 | Gate valve 1/2 '' |
| 132 | Gate valve 3/4'' |
| 133 | Gate valve 1'' |
| 134 | Union 1/2'' |
| 135 | Union 3/4'' |
| 136 | Union 1'' |
| 137 | Single Piece WC with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories (Jaquar or equivalent) |
| 138 | Table top washbasin 635x410 (Jaquar or equivalent |
| 139 | Table top washbasin 495x395 (Jaquar or equivalent) |
| 140 | Tank nipple |
| 141 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 142 | Tank nipple 1\\" |
| 143 | Reducer socket |
| 144 | Nahani trap |
| 145 | C.P. Jali 4\\" |
| 146 | PVC connection |
| 147 | Half phase |
| 148 | Round phase |
| 149 | Maze over head Shower 240mm ( Jaquar or equivalent) |
| 150 | Shower ( Parryware or equivalent ) |
| 151 | Shower arm 20mm dia & 600mm long (Jaquar or equivalent) |
| 152 | Shower rod (Parryware or equivalent ) |
| 153 | Health faucet (Jaquar or equivalent) |
| 154 | Health faucet (Parryware or equivalent) |
| 155 | Flexible Tube 12mm Dia & 1.5m long with nuts (Jaquar or equivalent) |
| 156 | Maze hand shower single flow (Face plate stainless steel & ABS Body cleaning system Model(Jaquar or equivalent) |
| 157 | Toilet roll holder with stainless steel flap (Jaquar or equivalent) |
| 158 | Tee (G.I.) |
| 159 | CPVC Tee |
| 160 | X-Nipple 1/2\\" |
| 161 | Nipple |
| 162 | Jet (Parryware or equivalent) |
| 163 | G.I. Socket 3/4\\" |
| 164 | G.I. Elbow 3/4\\" |
| 165 | MT Socket |
| 166 | Brass FT Socket |
| 167 | Towel ring with flange Jaquar or equivalent |
| 168 | Soap Dish Holder Jaquar or equivalent |
| 169 | Premium wall Bracket for hand shower Jaquar or equivalent |
| 170 | Brass Elbow |
| 171 | 1/2\\" Plain Elbow CPVC |
| 172 | 1/2\\" Union CPVC |
| 173 | PVC Cistern Ball Cock |
| 174 | Washbasin Jaqaur |
| 175 | Towel rod 2\\" |
| 176 | CPVC Gate Valve 1\\" |
| 177 | CPVC Elbow 1\\" |
| 178 | Bottle Trap ( Jaquar or equivalent) |
| 179 | Towel rail ( Jaquar or equivalent) |
| 180 | Towel Rack 600mm Long with Lower Hangers ( Jaquar or equivalent) |
| 181 | Corner Glass Shelf (with Bracket) ( Jaquar or equivalent) |
| 182 | Tumbler Holder |
| 183 | Flow Diverter woven gold for Jacuzi |
| 184 | POP-UP woven gold for Jacuzi |
| 185 | Providing and fixing hardware fittings |
| 186 | Tower bolt SS 6\\" |
| 187 | SS handle 6\\" |
| 188 | Godrej Door lock |
| 189 | Door closer (Hardwyn, Godrej) |
| 190 | Almirah lock (Godrej) |
| 191 | Aldrop ss 8\\" |
| 192 | Door machine heavy duty(hardwyn or equivalent brand) with rubber for glass |
| 193 | SS hinges al bihari ( Hettich) |
| 194 | Sliding reducer/Channel (hettich) |
| 195 | Cylindrical lock |
| 196 | Godrej ELC 06-6 Lever Mortise Lock Handle Set (Satin Nickel Finish). |
| 197 | Slding drawer channels hettich |
| 198 | Brass door stopper |
| 199 | 25 mm rod with brass finish small bracket without ring |
| 200 | Brass finish finials |
| 201 | P/F 19 mm thick commercial board in shelves, shutters or wherever damaged and lipped with veneer including melamine polishing complete job. |
| 202 | P/F 6mm thick plyboard incld. Nuts, fevicol etc. |
| 203 | Removal of waste by mechanical means and disposal of the same beyond municipal limits |
| 204 | Supplying and fixing C.I. cover without frame for manholes |
| 205 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality, Rectangular shape 600x450 internal dimensions |
| 206 | Providing and laying APP (Atactic Poly Propylene Polymer ) modified prefabricated five layer water proofing membrane, black finishing reinforced with glass fibre mat consisting of a coat of bitumen primer forbitumen membrane @ 0.40 ltr/sq. mt. by the same membrane manufacture of density at 25°C, 0.87- 0.89 kg/ltr and viscosity 70-160 cps. Over theprimer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vitalphysical and chemical parameters of the membrane shall be as under: Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying ofmembrane shall be got done through the authorized applicator of the manufacture of membrane.With glass fibre matt: Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N.matt: Joint strength in longitudinal and transverse direction at 23°C as 650/450 N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N |
| 207 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:, 50 meter beyond 1 m from cutting edge. |
| 208 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement:2 Coarse Aggregate: 4 Stone Aggregate 20 mm niminal size). Including cariage of materials from quaries upto 100 KM. |
| 209 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement:4 Coarse Aggregate: 8 Stone Aggregate 40 mm nominal size). Including cariage of materials from quaries upto 100 KM. |
| 210 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 211 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 212 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 213 | Repair and adjustment of shower door by disengaging the glass door and refixing it by asdhjustment of hinges along with greesing complete. |
| 214 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood (35 mm thick). |
| 215 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood (35 mm thick) |
| 216 | Providing POP punning on walls and ceiling with 6 mm average thickness on vertical/ horizontal surface of walls complete (POP make Sakarni or equivalent ). |
| 217 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 218 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 219 | Providing & fixing wall panelling consisting of water proof 12 mm thick HDHMR (HIGH DENSITY HIGH MOISTURE RESISTANCE) board fixed on walls with the support of formwork made up of alumunium tube (25mm x 50mm) fixed on existing walls using screws complete with cutting for switch boards and other requirements as per design. |
| 220 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand) |
| 221 | Supply of portable Water through tankers from private suppliers. |
| 222 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 223 | Extra for half Brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means. |
| 224 | Scrapping of old polish of wooden doors, windows, Panelling , Partitions by way of applying Paint remover paint (bansilal or equivalent brand) 2-3 coats and then removing manually by using blades until the smooth surface appears. |
| 225 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 226 | Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm |
| 227 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood |
| 228 | 50x12mm |
| 229 | 50x20 |
| 230 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 kg/sqm of area for each course, second course of roofing felt type 3 grade-I (Hessian based self finished bitumen felt) and fourth & final course of stone grit 6mm & down size or pea-sized gravel spread at 6 cubic decimeters per square metre including preparation of surface but excluding grading complete with: 23.8.1 Bitumen felt (Hessian based) type 3grade I conforming to Is : |
| 231 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 232 | Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete. Including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm |
| 233 | Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete. |
| 234 | Repair of chairs/sofa by way of removing existing damaged upholstry and replace it with new one , including polish, back ply, foam, nails, fevicol and seating ply includinng carpenter complete in all respects.basic cost of fabric = Rs 1000 / sft |
| 235 | Providing and fixing glass shower cubicles made up of 10mm thick toughened glass including door complete with S.S. brackets,handles and other necessary fittings (Saint Gobain, Modiguard or equivalent brand) |
| 236 | Renting of Cushioned chairs/ plastic chairs with cover including carriage. |
| 237 | Providing and fixing curve water filler of woven gold brand for existing Jacuzi of same brand |
| 238 | Providing and laying waterproofing treatment to horizontal surface consisting of following operations:1. Removal Work : Removing old plaster/even and sound concrete or Bricks/cement salury/ PCC etc.using hammer or hilti machine. 2. Surface Cleaning & Preparation: Cleaning the surface using hard wire bursh,hair brush and other mechanical means. Ensuring that all loose dirt,dust and oil particles are removed from surface. Repairing of surface using polymer modified mortar/microconcrete and thus making the surface ready for waterproofing treatment. (Chemical Used:- Fosroc_Renderoc RG, equivalant).3. Joint & Slab Repair Work: Bricks Joint & Crack Treatment: Chase open joints in v shape of 15mm x 15mm using suitable means, later cleaning the same using water jet/blower and applying a bond coat of Nitobond SBR Latex mixed with cement, sand, Recron Fiber and water. Repairing of all cracks, holo area and honey combing with rich cement and mortor Admixed with integral waterproofing Compound. ratio of 1:1:3:4(Water : Polymer : Cement : Sand+ Fiber)(Chemical Used:-Fosroc_Nitobond SBR & Reliance_ Recron Fiber/ equivalant).5. Primer Coat of Acrylic Bonder & Nano Technology Waterproofing Treatment: Once surface is properly cleaned and coatable providing and laying base primer one coat of Acrylic sealer and bonder /Nano technology /coating (Ratio:- 1:2:20) 1 part is Zycosil+, 2 part is Zycoprime plus, 20part is water. Dry for atleast 20-24 hours. Gravity-1.01-1.02, Solid Content: 35+- 1%, Viscosity @ 25c- <500 cps, pH@ 25c- 6-7. (Chemical Used:- Zydex-Zycoprime+Zycosil Plus, Fosroc_Hydroproof Xtra, equivalant).6. Fiber Glass Roll with Chemicals: Providing and Laying 50 gsm fiber glass roll over the primer coat with single components of high performance liquid membrane coating. Dilute EMB with water at a 50:50 ratio. Apply 8-10 sqm per kg .(Chemical Used:- Xchem_Eniroof EMB, Star-WF MB 602). 7. Two Coats of Highly Flexible Elastomeric Waterproofing Treatment: After application of fiber glass roll with EMB providing and laying Two coat of Highly flexible elastomeric coating. Applying first coat of Chemical over the surface and allowing it to dry for atleast 3-6 hours. Once first coat is dried providing and applying second coat of chemical coat and it to dry for atleast of 6-8 hours. Tensile Strength 0.51 N/mm2 (ASTM D 638), Elongation >1000% (ASTM D 412), Density 1.00+-0.05 g/ml (ASTM D 1475), (Ratio 1.2 kg per sqm in two coat. achive (DFT) of 550-650 microns. (Chemical Used:- Xchem_Eniroof EMB, Star-WF MB 602).8. Two Coats of High Solids Acrylic Waterproofing Treatment with Heat proof: After application of Eniroof EMB, laying two coat of Liquid Membrane acrylic coating with Heat proof. Applying first coat of liquid membrane coating over the EMB surface and allowing it to dry for atleast 5-6 hours. Once 1st coat is dried providing and applying second coat of Liquid membrane coat. Tensile Strength >2 N/mm2 (ASTM D 638), Elongation >500%b (ASTM D 638), Density 1.30+-0.05 g/ml (ASTM D 1475), UV resistance @100 hrs -Pass up to 7 degree (ASTM G 154). (Ratio 1.2 -1.5 kg per sqm in two coat. achive (DFT) of 1.2 mm (0.6mm per coat.) (Chemical Used:- Xchem_Eniroof SPR, Star-WF SP 600). |
| 239 | Supply and installation of window awnings including aluminium frame, jacks, necessary hardware,fasteners and hardware for flexible to and from movements including acrylic fabric cloth. The sample shall be duly approved by representative of Resident Commsion New Delhi, along with Engineer in charge. |
| 240 | Providing and fixing Rolling Curtains of approved design and shade, made from high-quality, UV-resistant, waterproof acrylic polyester fabric or PVC wooden shaded strips, mounted on powder-coated aluminum or galvanized steel frames. The system shall include robust spring-loaded or gear-operated rollers for smooth operation, side brackets, wall/floor anchors, crank handle or motorized system (as per requirement), and all necessary accessories and fittings for complete installation. The Vertical/ horizontal blinds should be retractable and capable of withstanding moderate wind loads, ensuring durability and ease of maintenance. Complete job including transport, scaffolding (if required), fixing at site, and all labour and tools. |
| 241 | Supply and Fixing of new curtains with premium quality fabric/ cloth of Curtains of approved design and make including stitching, lining, wastage including stitching of tie belts , eyelet curtain rings complete job upto final finishing level.Basic cost of fabric = Rs. 1000/ mtr.basic cost of lining = Rs.320/ mt |
| 242 | Providing and fixing 16 mm thick full body quartz of approved shade and quality as countertop over existing fridge vanity counters, including cutting to required size, chemical fixing using epoxy-based adhesive, filling of joints with matching resin-based filler, edge molding with polished finish, polishing the top surface to high gloss or matte finish as approved, cleaning the surface, and disposal of debris, complete in all respects as per direction of Engineer-in-Charge. |
| 243 | Providing and fixing HDF wooden laminated flooring 12mm thick of AC-5 HDF grade of \\"Action Tesa\\" or equivalent brand with 0.20 mm thick Polyurethane Sheet and 2mm thick PU foam as per approved colour, shade and design including 12mm skirting and 12 mm thick profile complete job as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
