|
| 1 | Cartage of line Material from any Store of PVVNL to JE Store including loading & Unloading at both ends. |
| 2 | Cartage of line Material from any JE Store to various site of work including loading & Unloading at both ends. |
| 3 | Cartage of 11 Mtr PCC/13 Mtr ST Pole from any Store of PVVNL to JE Store including loading & Unloading at both ends. |
| 4 | Cartage of 11 Mtr PCC/13 Mtr ST Pole from any JE Store to various site of work including loading & Unloading at both ends. |
| 5 | Cartage of ABC (3x120+1x95+1x16) sq.mm from any Store of PVVNL to JE Store including loading & Unloading at both ends. |
| 6 | Cartage of ABC (3x120+1x95+1x16) sq.mm from any JE Store to various site of work including loading & Unloading at both ends. |
| 7 | Cartage of 250 KVA Distribution Transformer from any Store of PVVNL to JE Store including loading & Unloading at both ends. |
| 8 | Cartage of 250 KVA Dstribution Transformer from any JE Store to various site of work including loading & Unloading at both ends. |
| 9 | Cartage of 100 KVA/63KVA/25KVA Distribution Transformer from any Store of PVVNL to JE Store including loading & Unloading at both ends. |
| 10 | Cartage of 100 KVA/63KVA/25KVA Distribution Transformer from any JE Store to various site of work including loading & Unloading at both ends. |
| 11 | Errection of Double PCC Pole 11 mtr long after digging a pit of size 1.20x0.60x1.6 mtr in all type of Soil for each pole including grouting ratio (1:4:8) of the pole with proper ramming after completion of work. |
| 12 | Fixing/Installation of ACSR Weasal Conductor for jumpering. |
| 13 | Fixing of LT XLPE Cable 1x400 sq.mm |
| 14 | Laying, Lagging and Sagging of LT ABC (3x120+1x95+1x16) sq.mm |
| 15 | Fixing of LT XLPE Cable 1x120 sq.mm |
| 16 | Providing and Fixing of Earth Rod |
| 17 | Providing and Fixing of MS Nut and Bolts. |
| 18 | Providing and Fixing of all types off size Clamps as per site requirement with nut and bolt. |
| 19 | Making a Plinth of size suitable for 250 KVA T/F 3x2x1m above ground level and 01 ft. below ground level after digging of earth brick ballast shall be provided and remerging will be done properly after that a remaining wall of 9'' width by first class brick in ratio 1:4 of Cement and Sand will be made. The earth shall be filled upto 1 feet below the top of the plinth after this brick ballast shall be provided upto 6'' from the earth level and proper remaining shall be done 1 no. jall of 12 mm shall be fixed in the hollow of plinth and four inches thick RCC in 1:2:4 ratio of Cement, Sand & Stone Ballast Shall laid on the top of the Plinth as per the site requirement. |
| 20 | Making a Fencing suitable for 250 KVA T/F Plinth including Providing, Fabrication and Fixing of wire mesh Fencing Frames of size 3.0x2.0x2.0 m fabricate out of MS Angle Iron of size 35x35x6 sq.mm having 02 no. of legs of 15 cm. long in each frame duly welded and fixing with wire mesh of size 25x25x10 SWG hot dipped galvanized with in the frame passed under MS flats of size 25x5 mm inside the angle on all four side wih help of approx 20 No. bolt and nut of 10mm diameter 15cm legs of frame will be grouted in 21:2:4 Cement, Coarse Sand and 20mm gauge stone Ballast with paint with one coat of Red Oxide and two coat of Aluminium Paint of approved mark after proper cleaning as per site requirement. |
| 21 | Water level earthing of neutral and body of 11/0.4 KV Distribution Transformers by boaring of earth upto Water Level and lowering of GI Pipe 32 mm dia upto water level and connecting the same by MS Flat of size 40x4mm with transformers. The transformer will be earthed properly including cutting, jointing, welding etc of MS Earth strip and connecting one earthing with the neutral bushing of transformer and other to the body of transformer at several points. The GI Pipes will be connected to each others with the help of GI Sockets and a Cap will be provided on the upper part of the GI Pipe for pouring of water during summer season. |
| 22 | Providing, Fabrication & Fixing of MS Channel Top |
| 23 | Providing, Fabrication & Fixing of MS Channel Dropper |
| 24 | Fixing of 11 KV Fuse Set. |
| 25 | Providing & Fixing of Danger Board Barbed wire including jumper |
| 26 | Providing and Fixing of Piercing Clamp. |
| 27 | Providing and Fixing of Suspension Clamp. |
| 28 | Providing and Fixing of Dead and Clamp |
| 29 | Providing and fixing of J Hook |
| 30 | Providing and fixing of Tailless Unit 800Amp 650Volt as per site requirement |
| 31 | Providing and fixing of Three Phase Distribution Box |
| 32 | Providing and fixing of Copper L-piece 50x225x10mm (LS) |
| 33 | Fixing of Connecting Lead 1x16 sq.mm |
| 34 | Fixing of 11 KV Pin Insulator with pin |
| 35 | Providing and Fixing of Aluminium lugs 400 sq.mm |
| 36 | Providing and Fixing of Aluminium lugs 100 sq.mm |
| 37 | Providing and Fixing of LT Fuse Box |
| 38 | Fixing of 11 KV TPMO in all respects Please Enable Macros to View BoQ information |
