|
| 1 | Cartage of LT XLPE Cable 1x120mm²/1x240mm²/1x400mm²/1x 630mm²/1x1000mm² from any Store of PVVNL to JE Store including loading & Unloading at both ends. |
| 2 | Cartage of LT XLPE Cable 1x120mm²/1x240mm²/1x400mm²/1x 630mm²/1x1000mm² from any JE Store to various site of work including loading & Unloading at both ends. |
| 3 | Fixing of LT XLPE Cable 1x120mm² |
| 4 | Fixing of LT XLPE Cable 1x240mm² |
| 5 | Fixing of LT XLPE Cable 1x400mm² |
| 6 | Fixing of LT XLPE Cable 1x630mm² |
| 7 | Fixing of LT XLPE Cable 1x1000mm² |
| 8 | Supply of HT Tape |
| 9 | Supply of Copper L-piece 50x225x10mm |
| 10 | Supply of Copper Fuse wire of Various size suitable for 10 KVA to 1000 KVA Distribution Transformer. |
| 11 | Supply of Alluminium Lugs 150 mm² |
| 12 | Supply of Alluminium Lugs 240 mm² |
| 13 | Supply of Alluminium Lugs 400 mm² |
| 14 | Supply of Alluminium Lugs 630 mm² |
| 15 | Supply of LT Rod suitable for 25/63 KVA Transformer |
| 16 | Supply of LT Rod suitable for 100 KVA Transformer |
| 17 | Supply of LT Rod suitable for 250/400 KVA Transformer |
| 18 | Supply of LT Rod suitable for 630 KVA Transformer |
| 19 | Supply of U Type Clamp suitable for any size LT Rod to LT Lead Clamping. |
| 20 | Providing & intallation of 11KV Fuse Set units at different 11/0.4 KV S/S & making connections etc. |
| 21 | Water level earthing of neutral and body of 11/0.4 KV Distribution Transformers by boaring of earth upto Water Level and lowering of GI Pipe 32 mm dia upto water level and connecting the same by MS Flat of size 40x4mm with transformers. The transformer will be earthed properly including cutting, jointing, welding etc of MS Earth strip and connecting one earthing with the neutral bushing of transformer and other to the body of transformer at several points. The GI Pipes will be connected to each others with the help of GI Sockets and a Cap will be provided on the upper part of the GI Pipe for pouring of water during summer season. |
| 22 | Removal of cable and other accessories (Working as a obstacle) to remove Fencing |
| 23 | Dismantling of damaged wire mash fancing from the plinth and safe cartage of same |
| 24 | Repairing of Fencing for DT 250 KVA & above Providing and Fixing (Major Work) |
| 25 | Grouting of Legs of wire mash Fencing in the Plinth in Ratio 1:2:3 in Cement, Sand and Grit. |
| 26 | Repairing Work of Various Damaged Distribution Transformers Plints at Different Locations (Minor Repairing) |
| 27 | Repairing Work of Various Damaged Distribution Transformers Plints at Different Locations (Major Repairing) |
| 28 | Making free 250/400/630 KVA T/F from existing damaged plinth site after opening the LT PVC Cable, 11KV side connections, cutting the earthing strips connecting to neutral bushing and the body of T/F and re-connections after work. |
| 29 | Shifting of 250/400/630 KVA T/F from Plinth site to near by site with the help of hydra and manual labour safely and placing the same after construction of plinth |
| 30 | Providing and Fixing T/F Trolley at required site to provide un-intruppted Supply to Consumer. |
| 31 | Providing of Tool Kit (Magger 5 KV, Tongue Tester, Earth Tester, Lug, Crimping Tool Kit) |
| 32 | Providing & intallation of Single Phase LT Fuse Set units at various 10 KVA and 16 KVA Distribution Transformers & making connections etc. |
| 33 | Providing & intallation of Three Phase LT Fuse Set units at various 25 KVA and 63 KVA Distribution Transformers & making connections etc. |
| 34 | Providing & intallation of tailless units containing incoming/outgoing studs of 500 Amp/650 volts rod,made out of brass & having copper L type contact, at different 11/0.4 Kv S/S & making connections etc. Please Enable Macros to View BoQ information |
