|
| 1 | Supply of following Decentralised material including freight and insurance charges. |
| 2 | 11 KV lighting Arrestor |
| 3 | 11 KV Fuse Set |
| 4 | 11 KV Relay |
| 5 | OTI and WTI Transformer |
| 6 | Bus Bar Lugs |
| 7 | AL Crimping Lug 240 sq mm |
| 8 | AL Crimping Lug 400 sq mm |
| 9 | Structure for above |
| 10 | MS Channle 125x65 for structure welding |
| 11 | Angler for Sub Station structure welding |
| 12 | MS Angle 65x65x6 mm |
| 13 | Aluminium Paint |
| 14 | Red Oxide Paint |
| 15 | M.S. Channel |
| 16 | Nut & Bolts with Washers |
| 17 | Tailless Unit 500 A |
| 18 | Danger Board |
| 19 | Aluminium Flat Bus Bar 50x10 mm |
| 20 | Holding Clamps |
| 21 | The following Centralised material Erection/ Fixing & laying as per RESPO manual and as per direction to Supervising Engineer (complete in all respect). Its includes the cost of labour,T&P & safe cartage etc.required all acessaries for proper completion of work. |
| 22 | 33 KV lighting Aresstor |
| 23 | 33 KV CT 400/200/1-A |
| 24 | 33 KV CT 200/100/1-A |
| 25 | 33 KV PT |
| 26 | 33 KV LINE ISOLATOR |
| 27 | 33 KV Bus Bar ACSR Panther Conductor |
| 28 | 33 KV Fuse Set |
| 29 | 33 KV Bus Isolator |
| 30 | 3x300 mm XLPE Cable |
| 31 | 11 KV Jointing Kit Indoor 3x300 mm |
| 32 | 11 KV Jointing Kit Outdoor 3x300 mm |
| 33 | 33 KV Polymeric Pin Insulator |
| 34 | 33 KV Polymeric Disc Insulator |
| 35 | 33 KV Disc Fitting |
| 36 | Un-Armoured control cable 4x2.5 sq mm |
| 37 | 11 KV CT CTR-600/300/5A |
| 38 | G.I. Wire 8 SWG |
| 39 | G.I. Wire 3.15 MM 10 SWG |
| 40 | LT PVC Cable AI 1X400 SQ MM |
| 41 | LT PVC Cable AI 1X630 SQ MM |
| 42 | Earthing of pole by MS Earthing rod of 20x2500 mms |
| 43 | Earthing Rod (2540x20 mm) |
| 44 | Earthing Complete |
| 45 | The following Decentralised material Erection/ Fixing & laying as per RESPO manual and as per direction to Supervising Engineer (complete in all respect). Its includes the cost of labour,T&P & safe cartage etc.required all acessaries for proper completion of work. |
| 46 | 11 KV lighting Arrestor |
| 47 | 11 KV Fuse Set |
| 48 | 11 KV Relay |
| 49 | OTI and WTI Transformer |
| 50 | Bus Bar Lugs |
| 51 | AL Crimping Lug 240 sq mm |
| 52 | AL Crimping Lug 400 sq mm |
| 53 | Structure for above |
| 54 | MS Channel 125x65 for structure welding |
| 55 | Angler for Sub Station structure welding |
| 56 | MS Angle 65x65x6 mm |
| 57 | Aluminium Paint |
| 58 | Red Oxide Paint |
| 59 | M.S. Channel |
| 60 | Nut & Bolts with Washers |
| 61 | Tailless Unit 500 A |
| 62 | Danger Board |
| 63 | Aluminium Flat Bus Bar 50x10 mm |
| 64 | Holding Clamps |
| 65 | Chemical Earthing |
| 66 | Water Level Earthing Power TF |
| 67 | Distribution Tranformers Fencing as per Resspo Norms |
| 68 | Distribution Transformer Plinth as Per Resspo Norms |
| 69 | The following material Recieved back from Site to concern store centre as per RESPO manual and as per direction to Supervising Engineer (complete in all respect). |
| 70 | 33 KV CT Old & Damage |
| 71 | 33 KV ISOLATOR OLD & Damage |
| 72 | 33 KV Fuse Set |
| 73 | Almunium Scrap |
| 74 | Steel Meteble scrap |
| 75 | 11 KV CT Old & Damage Please Enable Macros to View BoQ information |
