|
| 1 | Safe carriage of the following equipment including loading and unloading on trucks duly arranged by the contractor from stores of different sub - station of electricity transmmision circle gr. Noida ( approx. dist. 100 KM ), with all due care of safety & precautions during transit required for the job including the insurance / fare / toll tax etc. of all the trucks. (A) Transpotation of 03No. 33KV PT, 03No. 33KV CT and 02 set 33KV Isolator. |
| 2 | (B) Transpotation of 01No. 33KV VCB, 01 No. 33 KV Tripple feeder C&R Panel & various size control cable (2KM). |
| 3 | Safe carriage of the following equipment ( ALP, ABL,& CCR ) Loaded structure from electy. Fabrication unit Naini Prajagraj to 132 Kv S/S Shikarpur Under ETD - Khurja ( Distance Approx. 730 km. ) CCR - ( 2 No. ) Column, CGR - ( 1 No. ) Beam, TMR - ( 1 No. ) Mast, ALP - ( 13 No. ), ABL - (2 No.) |
| 4 | Erection of Auxiliary Structure as ALP-03 Nos (approx weight- 121Kg), ABL-02Nos (approx weight-341 Kg) and 33 KV Circuit Breaker related structure installing as per drawing with the help of G.I. nut & bolt, flat, spring washer, matching the hole. |
| 5 | Erection of 33 KV equipments including shifting of equipments and accessories from store to erection site, fixing of required clamps, all related cable termination with cable glands according schedule, welding and other related associated works with testing and commisoning. (A) 36 KV Bus Isolator (1250 Amp) |
| 6 | (B) 36 KV Line Isolator |
| 7 | (C) 36 KV CTs (400/200/1A) |
| 8 | (D) 36 KV CT Junction box |
| 9 | (E) 33 KV VCB |
| 10 | (F) 33 KV Tripple feeder control and relay panel (Conventional Type) |
| 11 | (G) 36 KV PT With Terminal Connection |
| 12 | (H) 36 KV PT Junction box |
| 13 | (I) Metering Cubical ffor ABT Energy Meter |
| 14 | Jumpering of all equipments of 33 KV Bay with ACSR Panther conductor in between 33 KV Main Bus to Bus Isolator, BI to CB, CB to CT, CT to LI etc. with the help of suitable clamps and required cutting and bending of conductors and all other works to complete the job satisfactory. |
| 15 | Earthing of Structure, Equipments, metering cubicle & Panel. a) Cutting, straightening & laying of following MS flat 750 mm below inside ground and above ground of 50 mm x 6 mm size and 25 mm x 6 mm size MS Flats for earthing of main auxiliary structures, equipment and cable trenches including welding with main earthmat and with the object to be earthed excavation of trenches its back filling, Painting by One coat of Red Oxide and Two coat of Bus Green Colour and all other associated work to complete the Earthing work satisfactorily as per technical specification. (A) Fresh Earthing,Connected With Earthmat 50x6mm |
| 16 | (B) Fresh Earthing,Connected With Earthmat 25x6mm |
| 17 | Laying of following size of control cables in the cable trenches for 33 KV CB, CT, Isolator, Tripple Feeder C&R Panel etc. in switchyard/ control room as per cable schedule including carriage of cable drums from stores to work site and shifting back to store with all other associated works to complete the job satisfactorily as per technical specifications:- (A) Laying/termination,control cable 2Cx2.5sqmm |
| 18 | (B) Laying/termination,control cable 4Cx2.5sqmm |
| 19 | (C) Laying/termination,control cable 6Cx2.5sqmm |
| 20 | Interconnection & Termination of various sizes above laid Control Cables between 33KV Triple Feeder C&R Panel to various Equipments & Equipments to Equipments in 2 No. 33KV Feeder Bays including Extending D.C. Supply from DCDB and A.C. Supply from ACDB to C&R Panels and various Equipements including Making necessary Holes in Gland Plats wherever required alongwita Providing & Fixing of appropriate sizes Cable Glands, Providing of Ferrules for such Core of the Cables, then Termination with Crimping type Copper Lúgs alongwith Preparation of Inter-Connection Drawing and Commissioning of the Panel / Feeders in Co-ordination with T&C Wing including Providing of 2 Sets of Hard Copies of as Executed Inter-Connection Drawing. |
| 21 | Providing & Laying of Following sizes G.I Pipe from C.T/P.T. Junction Boxes in switchyard to Metering Cubical box in Control room for Laying of Control Cables through G.I. Pipe as per site Requirement along with associated Work such as Cutting, making, threads for fitting of sockets, Elbows, Dressing etc. with due earthing of laid G.I. Pipe at cach end. (A) 2\\"Dia G.I. Pipe |
| 22 | (B) 1\\"Dia G.I. Pipe |
| 23 | Painting of M.S. Earthing Strips with 1 coat of Red Oxide Primer & 2 coats (The 2 coat of Paint shall be applied at the gap of 48 hrs. when 1 coat of Paint is done & Checked by concerned A.E. / J.E.) of 1 quality Synthetic Enamel Paint of Asian/Berger/Nerolac make in Bus Green/Black Colour with all Cost of Materials after due Rubbing with Sand Paper & Wire Brush, as per details below :- (A) Painting of 50 x 6 mm size M.S. Earthing Strip in Bus Green Colour. |
| 24 | (B) Painting of 25×6mm/25x5 mm size M.S. Earthing Strip in Black Colour |
| 25 | PART -B SUPPLY. 33 KV Isolator clamp for twin panther conductor made of aluminum alloy LM-6. |
| 26 | 33 KV CT clamp for twin panther conductor made of aluminum alloy LM-6. |
| 27 | 33 KV PT clamp for twin panther conductor made of aluminum alloy LM-6. |
| 28 | 4 Bolted type PG clamp made of Aluminum alloy LM-6 with GI Nuts, Bolts & Washer suitable for Zebra to Panther. |
| 29 | 4 Bolted type PG clamp made of Aluminum alloy LM-6 with GI Nuts, Bolts & Washer suitable for Panther to Panther. |
| 30 | 4 Bolted type PG clamp made of Aluminum alloy LM-6 with GI Nuts, Bolts & Washer suitable for Zebra to Zebra. |
| 31 | Supply of flexible copper bond made of electroyte copper rope of size 16 mm dia and having hength 750 mm tinned copper and lug shall be pressed jointed both end of copper bond as per technical specification. Please Enable Macros to View BoQ information |
