Tender For Signage Work On Service Road Rhs In Lucknow Kanpur Road To Hardoi Road Hardoi Road To Sitapur Road(Ring Road) In Km-15 To 23 Under The Jurisdiction Of Ae Iii., Lucknow-Uttar Pradesh
TDR : 55653879
Tender Notice
Corrigendum Details
BOQ
1 Days Left
Lucknow
Uttar Pradesh
Corrigendum : Tender For Signage Work On Service Road Rhs In Lucknow Kanpur Road To Hardoi Road Hardoi Road To Sitapur Road(Ring Road) In Km-15 To 23 Under The Jurisdiction Of Ae Iii.
Name of Work:- Signage Work on Service Road RHS in Lucknow Kanpur Road to Hardoi Road Hardoi Road to Sitapur Road(Ring Road) in km-15 to 23 under the Jurisdiction of AE III.
Sl. No.
Item Description
1
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface.Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes.as per SOR Chap-26 Item No.2
2
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. (Repeated / Tranvers bar)Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes.as per SOR Chap-26 Item No.3
3
Supply & fixing of Linear Delineator System (LDS) panels made of Micro Prismatic Retro Reflective sheeting type XI duly laminated on thin aluminium foil to a unique corrugated shape to provide Retro Reflection across wide range of observations and external angles. Eatch LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing concrete/brick work with 16 Nos fastner/ screw .as per SOR Chap-26 Item no.9
4
The solar studs shall be made of Aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13,635 kg tested in accordance with ASTM D4280. Its colour may be white , red , yellow , green or blue or combination as directed by the Engineer . Its water resistance shall meet the requirements of IP 65 in accordance with IS:12063:1987 category 2 for protection against water ingress.The dimensions of solar studs shall not be less than 100 mm X 100 mm X 10 mm . It shall have super bright LEDs so as to provide long visibility from a distance of more than 800 m. Its flashing rate shall not be less than 1 Hz . Its should be able to give the prescribed performance in the temperrature range of - 400C to +550C. Its life shall be not less than 3 Years. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge.as per SOR Chap-26 Item No.16 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
