|
| 1 | Cartage of the following material from central store Meerut to site of work including loading & unloading at both ends (maximum distance up to 50 km.) |
| 2 | 1-P.C.C. Pole 8.5 Mtr. Long. |
| 3 | 2-P.C.C./STP Pole 11 Mtr. Long. |
| 4 | 3-Line material such as 33/11 K.V. cross arms33/11 KV Pin insulator,33/11 KV Disk Insulatot/conductor/GI Wire/MS angle/MS channel/stay wire/stay rod/earthing rod, disc fitting etc. |
| 5 | 4-Cartage of 11 KV XLPE Cable of Size3x120 |
| 6 | 5-Cartage of 11 KV XLPE Cable of Size3x70 |
| 7 | 6-Cartage of 11 KV XLPE Cable of Size3x185 |
| 8 | 7-Cartage of 33KV cable 3X300 SQMM |
| 9 | Erection of Round Pole/P.C.C. Pole 8.5/PCC 11 Mtr. Long including fixing all accessories and fabrication as required after digging a pit of size 1.20X0.75X1.75 Mtrs. 1. PCC Pole 8.5 Mtr |
| 10 | 2-P.C.C./STP Pole 11 Mtr. Long. |
| 11 | Earthing of PCC support with MS Earth rod of 2.5 Mtr. Long including excavation of pit & driving of MS rod up to proper depth & connection the earth electrode with the help of GI wire. |
| 12 | Laying,Lifting, stringing,digging,drilling and sagging of 33 AND 11KV XLPE Cable complete in all respects as per RESPO norms. 1-11 KV 3x120 XLPE Cable |
| 13 | 2-11 KV 3x70 XLPE Cable |
| 14 | 3-11 KV 3x185 XLPE Cable |
| 15 | 4-33 KV 3x300 XLPE Cable |
| 16 | Laying Lifting stringing and sagging of conductor complete in all respects as per RESPO norms. 1-Rabbit Conductor. |
| 17 | 2-Weasel Conductor. |
| 18 | 3-Dog Conductor |
| 19 | Erection fixing & grouting of stay rod size 16X1800mm after digging the pit of size 0.60X0.30X0.30 meter in ratio 1:4:8 including fixing of stay wire clamp and nuzzling at the both ends. |
| 20 | Straightening of tilled PCC Pole of 11 KV/LT Lines after opening the bindings from insulators and digging the pit for require depth and refilling the same pit after completion of work including rebinding the conductor with insulators & sagging the conductor. |
| 21 | Providing & fixing of following clamps for PCC Pole/ST Pole, made of MS flat of size 50X6mm complete in all respect.1-Nut & bolt.of various size |
| 22 | 2-Double Pole Clamps with nut & bolt. |
| 23 | Providing & fixing of stay clamp for PCC Pole/STP made of MS flat of size 50X6 mm complete in all respect. |
| 24 | Providing & fixing of G.I Pipe 6 Inc. |
| 25 | Providing & fixing of Stay insulator in stay wire as per site requirement. |
| 26 | Providing and fixing of Stone Pad |
| 27 | Fabrication of cross arm from given MS channel for making T/Section of HT Line. |
| 28 | Providing & Fixing of F-Clamp for PCC Pole/STP made of MS flat of size 50X6mm with nut & bolt. |
| 29 | Providing & fixing of cross arm holding clamp for PCC Pole/STP made MS flat of size 50X6mm with nut & bolt. |
| 30 | Dismantling of Damaged/Rusted STP/Rail pole of existing line after opening all fittings and digging the pit of required size. |
| 31 | Making section T-off for 11 KV/HT Line. |
| 32 | Refixing of old stay after digging of pole of regard size & then grouting of stay on site required. |
| 33 | Cutting & Chopping of tree branches. |
| 34 | Jumpering of 11 KV/HT Line at different places/T points. |
| 35 | Removal of damaged/burnt conductor/GI wire after opening the bindings & making the role etc.1-Wire Old & Damaged/GI Scrap |
| 36 | 2-Weasel Conductor Scrap |
| 37 | 3-11 KV ABC Cable 3x120 Sq mm (scarp) |
| 38 | Resagging of Loose 11 KV Line/HT Line after opening the binding than stringing the conductor & rebinding the same properly.1-Dog/Rabbit Conductor. |
| 39 | 2-Weasel Conductor. |
| 40 | Replacement of Damaged wooden cross arms by 11 KV ‘V’ type cross arms after opening the bindings and removal of 11 KV Pin insulators and fixing of new ‘V’ type cross arms and binding properly and other related works. |
| 41 | Removal & Replacement of defective/damaged LT Pin clamp/stay clamp/double Pole Clamp/Cross arm holding clamp/F Clamp by new clamp as per site requirement. |
| 42 | Replacement of old & defective/damaged LT Line shackle insulator by new one. |
| 43 | Errection of section by PCC Pole after digging a pit of size 1.20x0.75x1.75 mt |
| 44 | Repair/Replacement of damaged burnt Jumpers of double pole/section pole of 11 KV/ Line. |
| 45 | Fixing of cable Jointing/termination kit. |
| 46 | Dismantling of exsisting HT/LT Line by opening the binding at required place and rebinding the wire/conductor etc. as per site requirement to complete the work. |
| 47 | Grouting of PCC/STP 8.5 Mtr & 11MtrPole complete with cement concrete as per RESPO Norms |
| 48 | Cartage of All Dismantled and removal material from site to Central Store Meerut including loading & unloading at both ends maximum distance about upto 50 Km. Please Enable Macros to View BoQ information |
