|
| 1 | Supplying, Installation, Testing & Commissioning of LED Down lighter (SMD Type) (System lumen efficacy >135lm/Watt) Recessed/surface Down lighter (Round /square/Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range - 5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/ 4000°K /5700°K / 6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim . |
| 2 | 18 watt |
| 3 | Supplying, installation, Testing & Commissioning of LED Down lighter (COB Type) (System lumen efficacy ≥105 < 120 lm/Watt ). Recessed/ surface Down lighter (Round/ square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector. |
| 4 | 12 -15 watt |
| 5 | Supplying and replacement of LED bulb ( white colour) include constant-current SMPS drivers (PF >0.9, THD ≤10-15%) and high-efficiency SMD/COB LEDs (≥120 lm/W). Internal construction features thermoplastic/aluminium heat sinks for thermal management, operating within -10°C to 50°C and a voltage range of 120-270V. as required with Minimum 1 year OEM warranty body Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. |
| 6 | 9 watt |
| 7 | Supplying and replacement of Decorative Picture Frame Light Sleek aluminum silver colour body with modern look adjustable head for precision lighting Perfect for showcasing artwork, lumen ~560 lm Warm White as required with Minimum 1 year OEM warranty, body Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement |
| 8 | 7 watt |
| 9 | Supplying, installation, Testing & Commissioning of LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt) fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70,under voltage and over voltage protection, EMI EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 10 | 120 watt |
| 11 | Supplying, Installation, Testing & Commissioning of Flood Light powder coated pressure die cast aluminium (System lumen efficacy >135 lm/Watt), powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI>70, under voltage and over voltage protection,EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 12 | 50 watt |
| 13 | Supplying and replacement of LED Bollard Lights. The lights shall be pre-wired with factory-integrated, potted constant current LED drivers and provided with anti-glare UV-stabilized polycarbonate (PC) diffuser ensuring symmetrical light distribution, with a minimum efficacy of 85 lm/W and IP65 protection rating. Installation shall be carried out at designated locations as per direction by Engineering incharge, including proper mounting, alignment, and fixing.Necessary accessories such as anchor bolts, base plates, and hardware, along with suitable weatherproof cable terminations. All luminaires shall be tested for proper operation, electrical safety, illumination performance, insulation resistance, and earthing continuity. As required with Minimum 1 year OEM warranty. Complete in all respects as per specifications. correlated color temperature (CCT) shall be finalized and approved by the Engineer-in-Charge in accordance with site requirements. |
| 14 | 10 watt |
| 15 | Supplying and replacement of LED light post top Decorative light 360-degree indirect light with IP 65 protection resistant to impact and corrosion. Glare-free and better uniformity. As required with Minimum 1 year OEM warranty Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. |
| 16 | 40 Watt |
| 17 | Supplying and replacement of LED Step lights (square shape) constructed from die-casted aluminium with a durable powder-coated finish, featuring an integrated LED system that ensures long-lasting performance and energy efficiency, complete with IP65 protection. As required with Minimum 1 year OEM warranty the shape, size, and correlated colour temperature (CCT) shall be finalized and approved by the Engineer-in-Charge in accordance with site requirements. |
| 18 | 2 Watt |
| 19 | Supplying, Installation, Testing and Commissioning of Wall fan (white colour) 2100 RPM motor that generates a high-speed airflow of 85 m³/min and an impressive 40 cm (400 mm) sweep size. Take control of with 3 wind modes for easy speed adjustment according to needs, This easy to clean , with an adjustable tilt of 65° and oscillation control within 60°,It offers 100% copper motor for consistent performance and longevity, Durable ABS build equipped with an inbuilt thermal overload protector for long-lasting performance and corrosion-resistant powder-coated metal grill for enhanced safety. With 2 Year domestic warranty. |
| 20 | Supply, Installation, Testing and Commissioning of Ceiling fan( with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body, Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 Degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. |
| 21 | 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Please Enable Macros to View BoQ information |
